标签：IFACE IFACES irqs 绑定 echo 网卡 affinity && CPU

#!/bin/bash
#
# Copyright (c) 2014, Intel Corporation
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions are met:
#
#     * Redistributions of source code must retain the above copyright notice,
#       this list of conditions and the following disclaimer.
#     * Redistributions in binary form must reproduce the above copyright
#       notice, this list of conditions and the following disclaimer in the
#       documentation and/or other materials provided with the distribution.
#     * Neither the name of Intel Corporation nor the names of its contributors
#       may be used to endorse or promote products derived from this software
#       without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
# DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE
# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
# SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
# CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
# OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#
# Affinitize interrupts to cores
#
# typical usage is (as root):
# set_irq_affinity -x local eth1 <eth2> <eth3>
#
# to get help:
# set_irq_affinity

usage()
{
    echo
    echo "Usage: $0 [-x] {all|local|remote|one|custom} [ethX] <[ethY]>"
    echo "    options: -x        Configure XPS as well as smp_affinity"
    echo "    options: {remote|one} can be followed by a specific node number"
    echo "    Ex: $0 local eth0"
    echo "    Ex: $0 remote 1 eth0"
    echo "    Ex: $0 custom eth0 eth1"
    echo "    Ex: $0 0-7,16-23 eth0"
    echo
    exit 1
}

if [ "$1" == "-x" ]; then
    XPS_ENA=1
    shift
fi

num='^[0-9]+$'
# Vars
AFF=$1
shift

case "$AFF" in
    remote)    [[ $1 =~ $num ]] && rnode=$1 && shift ;;
    one)    [[ $1 =~ $num ]] && cnt=$1 && shift ;;
    all)    ;;
    local)    ;;
    custom)    ;;
    [0-9]*)    ;;
    -h|--help)    usage ;;
    "")        usage ;;
    *)        IFACES=$AFF && AFF=all ;;    # Backwards compat mode
esac

# append the interfaces listed to the string with spaces
while [ "$#" -ne "0" ] ; do
    IFACES+=" $1"
    shift
done

# for now the user must specify interfaces
if [ -z "$IFACES" ]; then
    usage
    exit 1
fi

# support functions

set_affinity()
{
    VEC=$core
    if [ $VEC -ge 32 ]
    then
        MASK_FILL=""
        MASK_ZERO="00000000"
        let "IDX = $VEC / 32"
        for ((i=1; i<=$IDX;i++))
        do
            MASK_FILL="${MASK_FILL},${MASK_ZERO}"
        done

        let "VEC -= 32 * $IDX"
        MASK_TMP=$((1<<$VEC))
        MASK=$(printf "%X%s" $MASK_TMP $MASK_FILL)
    else
        MASK_TMP=$((1<<$VEC))
        MASK=$(printf "%X" $MASK_TMP)
    fi

    printf "%s" $MASK > /proc/irq/$IRQ/smp_affinity
    printf "%s %d %s -> /proc/irq/$IRQ/smp_affinity\n" $IFACE $core $MASK
    if ! [ -z "$XPS_ENA" ]; then
        printf "%s %d %s -> /sys/class/net/%s/queues/tx-%d/xps_cpus\n" $IFACE $core $MASK $IFACE $((n-1))
        printf "%s" $MASK > /sys/class/net/$IFACE/queues/tx-$((n-1))/xps_cpus
    fi
}

# Allow usage of , or -
#
parse_range () {
        RANGE=${@//,/ }
        RANGE=${RANGE//-/..}
        LIST=""
        for r in $RANGE; do
        # eval lets us use vars in {#..#} range
                [[ $r =~ '..' ]] && r="$(eval echo {$r})"
        LIST+=" $r"
        done
    echo $LIST
}

# Affinitize interrupts
#
setaff()
{
    CORES=$(parse_range $CORES)
    ncores=$(echo $CORES | wc -w)
    n=1

    # this script only supports interrupt vectors in pairs,
    # modification would be required to support a single Tx or Rx queue
    # per interrupt vector

    queues="${IFACE}-.*TxRx"

    irqs=$(grep "$queues" /proc/interrupts | cut -f1 -d:)
    [ -z "$irqs" ] && irqs=$(grep $IFACE /proc/interrupts | cut -f1 -d:)
    [ -z "$irqs" ] && irqs=$(for i in `ls -Ux /sys/class/net/$IFACE/device/msi_irqs` ;\
                             do grep "$i:.*TxRx" /proc/interrupts | grep -v fdir | cut -f 1 -d : ;\
                             done)
    [ -z "$irqs" ] && echo "Error: Could not find interrupts for $IFACE"

    echo "IFACE CORE MASK -> FILE"
    echo "======================="
    for IRQ in $irqs; do
        [ "$n" -gt "$ncores" ] && n=1
        j=1
        # much faster than calling cut for each
        for i in $CORES; do
            [ $((j++)) -ge $n ] && break
        done
        core=$i
        set_affinity
        ((n++))
    done
}

# now the actual useful bits of code

# these next 2 lines would allow script to auto-determine interfaces
#[ -z "$IFACES" ] && IFACES=$(ls /sys/class/net)
#[ -z "$IFACES" ] && echo "Error: No interfaces up" && exit 1

# echo IFACES is $IFACES

CORES=$(</sys/devices/system/cpu/online)
[ "$CORES" ] || CORES=$(grep ^proc /proc/cpuinfo | cut -f2 -d:)


node_dir=/sys/devices/system/node
for i in $(ls -d $node_dir/node*); 
do
    i=${i/*node/}
    corelist[$i]=$(<$node_dir/node${i}/cpulist)
done

for IFACE in $IFACES; do
    dev_dir=/sys/class/net/$IFACE/device
    [ -e $dev_dir/numa_node ] && node=$(<$dev_dir/numa_node)
    [ "$node" ] && [ "$node" -gt 0 ] || node=0

    case "$AFF" in
    local)
        CORES=${corelist[$node]}
    ;;
    remote)
        [ "$rnode" ] || { [ $node -eq 0 ] && rnode=1 || rnode=0; }
        CORES=${corelist[$rnode]}
    ;;
    one)
        [ -n "$cnt" ] || cnt=0
        CORES=$cnt
    ;;
    all)
        CORES=$CORES
    ;;
    custom)
        echo -n "Input cores for $IFACE (ex. 0-7,15-23): "
        read CORES
    ;;
    [0-9]*)
        CORES=$AFF
    ;;
    *)
        usage
        exit 1
    ;;
    esac

    # call the worker function
    setaff
done


IRQBALANCE_ON=`ps ax | grep -v grep | grep -q irqbalance; echo $?`
if [ "$IRQBALANCE_ON" == "0" ] ; then
    echo " WARNING: irqbalance is running and will"
    echo "          likely override this script's affinitization."
    echo "          Please stop the irqbalance service and/or execute"
    echo "          'killall irqbalance'"
fi

标签：IFACE,IFACES,irqs,绑定,echo,网卡,affinity,&&,CPU
来源： https://www.cnblogs.com/lwhctv/p/11540942.html

本站声明： 1. iCode9 技术分享网（下文简称本站）提供的所有内容，仅供技术学习、探讨和分享；
2. 关于本站的所有留言、评论、转载及引用，纯属内容发起人的个人观点，与本站观点和立场无关；
3. 关于本站的所有言论和文字，纯属内容发起人的个人观点，与本站观点和立场无关；
4. 本站文章均是网友提供，不完全保证技术分享内容的完整性、准确性、时效性、风险性和版权归属；如您发现该文章侵犯了您的权益，可联系我们第一时间进行删除；
5. 本站为非盈利性的个人网站，所有内容不会用来进行牟利，也不会利用任何形式的广告来间接获益，纯粹是为了广大技术爱好者提供技术内容和技术思想的分享性交流网站。