ICode9

精准搜索请尝试: 精确搜索
首页 > 其他分享> 文章详细

changing PCR (Rule) getting error "You only have display authorization"

2022-04-13 11:31:52  阅读:186  来源: 互联网

标签:getting PCR lock rule only Rule report SAP display


Reproducing the Issue

  1. Open transaction PE02,
  2. Change the SAP Standard rule like IN44, IN54, INTT, IN72, INF1 etc
  3. The system presents the error: 

You only have display authorization:

Message No. P0406
Diagnosis
The object you are trying to change has been locked so that only the person responsible for it is authorized to make changes.
If you look at the object's attributes, you will see that the field 'Changes only by person responsible' has been flagged.
You can, however, display the object and the system has therefore switched to the display mode.

The error is presented even if you have SAP_ALL authorization

Resolution

The issue occurs because the SAP Standard rule like IN44, IN54, INTT, IN72, INF1 etc was created by SAP. This kind of message is included in the system to avoid undesired changes or to avoid changes not recommended by SAP.

However, In this case you can run the RPUCTF00 report to remove the lock and implement the manual steps normally.

  1. Run the RPUCTF00 report.
  2. In the field "Schemas" enter the IN72 rule(example).
  3. Remove the checkbox "Set editor lock".
  4. Set the OFF value in the "Test" field, so that the report does not go into simulation.
  5. Execute the report, this will remove the lock.
  6. After making the changes in the rule, lock the rule again by executing the report again. This time, check the checkbox 'Set Editor Lock' and rest parameters as explained above. This would lock the rule again.

标签:getting,PCR,lock,rule,only,Rule,report,SAP,display
来源: https://www.cnblogs.com/hyyx/p/16139427.html

本站声明: 1. iCode9 技术分享网(下文简称本站)提供的所有内容,仅供技术学习、探讨和分享;
2. 关于本站的所有留言、评论、转载及引用,纯属内容发起人的个人观点,与本站观点和立场无关;
3. 关于本站的所有言论和文字,纯属内容发起人的个人观点,与本站观点和立场无关;
4. 本站文章均是网友提供,不完全保证技术分享内容的完整性、准确性、时效性、风险性和版权归属;如您发现该文章侵犯了您的权益,可联系我们第一时间进行删除;
5. 本站为非盈利性的个人网站,所有内容不会用来进行牟利,也不会利用任何形式的广告来间接获益,纯粹是为了广大技术爱好者提供技术内容和技术思想的分享性交流网站。

专注分享技术,共同学习,共同进步。侵权联系[81616952@qq.com]

Copyright (C)ICode9.com, All Rights Reserved.

ICode9版权所有