标签：Good 亮灭 ctrl pdata fb qcom dsi mdss panel
come from : https://blog.csdn.net/u012719256/article/details/54290565
0. fb0以及背光注册流程
// mdss_fb.c
mdss_fb_probe
// fbi 结构赋值
mdss_fb_register(struct msm_fb_data_type *mfd)
struct fb_info *fbi = mfd->fbi;
.....
fix = &fbi->fix;
var = &fbi->var;
fbi->fbops = &mdss_fb_ops; //ops
static struct fb_ops mdss_fb_ops = {
...
.fb_blank = mdss_fb_blank, /* blank display */
...
};
mdss_fb_blank
mdss_fb_blank_sub
case FB_BLANK_UNBLANK:
mdss_fb_blank_unblank(mfd); //light up
break;
case FB_BLANK_HSYNC_SUSPEND:
case FB_BLANK_POWERDOWN:
mdss_fb_blank_blank(mfd, req_power_state); // light off
break;
// 注册 backlight sys节点及set函数实现
led_classdev_register(&pdev->dev, &backlight_led)
static struct led_classdev backlight_led = {
.name = "lcd-backlight",
.brightness = MDSS_MAX_BL_BRIGHTNESS / 2,
.brightness_set = mdss_fb_set_bl_brightness, // 背光set函数
.max_brightness = MDSS_MAX_BL_BRIGHTNESS,
};
// register fbx
register_framebuffer(struct fb_info *fb_info) // fbmem.c
1.mdss_fb_blank_blank & unblank
// (drivers\video\msm\mdss\mdss_fb.c)
/* 亮灭lcm代码追踪 */
mdss_fb_blank_blank
mdss_fb_set_backlight // <1> 背光
mfd->mdp.off_fnc(mfd); // <2> 显示
mdss_fb_blank_unblank
ret = mfd->mdp.on_fnc(mfd);
mdss_fb_set_backlight
<1> 背光
// mdss_fb_set_backlight 函数追踪
mdss_fb_set_backlight // mdss_fb.c
mdss_panel_data->set_backlight
----------
// (drivers\video\msm\mdss\mdss_dsi_panel.c)
ctrl_pdata->panel_data.set_backlight = mdss_dsi_panel_bl_ctrl;
case BL_WLED:
printk("zch===============set blk type = BL_WLED\n");
led_trigger_event(bl_led_trigger, bl_level);
break;
case BL_PWM:
printk("zch===============set blk type = BL_PWM\n");
mdss_dsi_panel_bklt_pwm(ctrl_pdata, bl_level);
break;
note: 背光的控制方式由 dsi中的 qcom,mdss-dsi-bl-pmic-control-type 属性值控制 ！
qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_wled" ， “bl_ctrl_pwm”;
1
<2> 显示
// (drivers\video\msm\mdss\mdp3_ctrl.c) mdp3_interface->on_fnc mdp3_interface->off_fnc event_handler
mdp3_interface->on_fnc =mdp3_ctrl_on
mdp3_clk_enable(1, 0);
rc = panel->event_handler(panel,
MDSS_EVENT_LINK_READY, NULL); // 开电 ①
rc |= panel->event_handler(panel,
MDSS_EVENT_UNBLANK, NULL); // 执行亮屏指令 ②
rc |= panel->event_handler(panel,
MDSS_EVENT_PANEL_ON, NULL);
mdp3_clk_enable(0, 0);
mdp3_interface->off_fnc = mdp3_ctrl_off;
rc = panel->event_handler(panel, MDSS_EVENT_BLANK, // 执行灭屏指令 ②
(void *) (long int)mfd->panel_power_state);
rc = panel->event_handler(panel, MDSS_EVENT_PANEL_OFF, // 关电 ①
(void *) (long int)mfd->panel_power_state);
① 开关panel电源
// mdss_dsi.c event_handler MDSS_EVENT_LINK_READY|MDSS_EVENT_PANEL_OFF
dsi_panel_device_register
ctrl_pdata->panel_data.event_handler = mdss_dsi_event_handler;
mdss_dsi_event_handler
MDSS_EVENT_LINK_READY|MDSS_EVENT_PANEL_OFF
mdss_dsi_on | mdss_dsi_off
mdss_dsi_panel_power_ctrl(struct mdss_panel_data * pdata, int power_state)(struct mdss_panel_data *pdata,int power_state)
case MDSS_PANEL_POWER_OFF:
mdss_dsi_panel_power_off(pdata); // ☆
case MDSS_PANEL_POWER_ON:
mdss_dsi_panel_power_on(pdata); // ☆
② 开关panel
/* MDSS_EVENT_UNBLANK | MDSS_EVENT_BLANK (drivers\video\msm\mdss\mdss_dsi.c)*/
mdss_dsi_event_handler
case MDSS_EVENT_UNBLANK:
if (ctrl_pdata->on_cmds.link_state == DSI_LP_MODE)
rc = mdss_dsi_unblank(pdata); // ☆
break;
case MDSS_EVENT_PANEL_ON:
ctrl_pdata->ctrl_state |= CTRL_STATE_MDP_ACTIVE;
if (ctrl_pdata->on_cmds.link_state == DSI_HS_MODE)
rc = mdss_dsi_unblank(pdata);
pdata->panel_info.esd_rdy = true;
break;
case MDSS_EVENT_BLANK:
if (ctrl_pdata->off_cmds.link_state == DSI_HS_MODE)
rc = mdss_dsi_blank(pdata, power_state); // ☆
break;
case MDSS_EVENT_PANEL_OFF:
ctrl_pdata->ctrl_state &= ~CTRL_STATE_MDP_ACTIVE;
if (ctrl_pdata->off_cmds.link_state == DSI_LP_MODE)
rc = mdss_dsi_blank(pdata, power_state);
rc = mdss_dsi_off(pdata, power_state);
break;
----------
// mdss_dsi_unblank |mdss_dsi_blank 函数追踪
mdss_dsi_unblank
ATRACE_BEGIN("dsi_panel_on");
mdss_dsi_ctrl_pdata ctrl_pdata->on(pdata);
ATRACE_END("dsi_panel_on");
mdss_dsi_blank
ATRACE_BEGIN("dsi_panel_off");
mdss_dsi_ctrl_pdata ctrl_pdata->off(pdata);
ATRACE_END("dsi_panel_off");
----------
// 解析lcm dts ，开关panel 回调函数赋值 (drivers\video\msm\mdss\Mdss_dsi_panel.c)
/* 0.解析lcm的dtsi，开关屏函数赋值 */
mdss_dsi_panel_init
mdss_dsi_ctrl_pdata ctrl_pdata->on = mdss_dsi_panel_on;
mdss_dsi_ctrl_pdata ctrl_pdata->off = mdss_dsi_panel_off;
/* 1. 解析 on/off cmd data */
mdss_dsi_parse_dcs_cmds(np, &pt->on_cmds,
"qcom,mdss-dsi-on-command","qcom,mdss-dsi-on-command-state");
mdss_dsi_parse_dcs_cmds(np, &ctrl_pdata->off_cmds,
"qcom,mdss-dsi-off-command", "qcom,mdss-dsi-off-command-state");
/* 2. 执行开关屏命令参数函数 */
mdss_dsi_panel_on
mdss_dsi_panel_cmds_send(ctrl, on_cmds, CMD_REQ_COMMIT);
mdss_dsi_panel_off
mdss_dsi_panel_cmds_send(ctrl, &ctrl->off_cmds, CMD_REQ_COMMIT);
2.打印背光亮灭
diff --git a/kernel/msm-3.18/drivers/leds/leds-qpnp-wled.c b/kernel/msm-3.18/drivers/leds/leds-qpnp-wled.c
index 06b80c8..fbf3403 100644
--- a/kernel/msm-3.18/drivers/leds/leds-qpnp-wled.c
+++ b/kernel/msm-3.18/drivers/leds/leds-qpnp-wled.c
@@ -199,7 +199,7 @@
#define QPNP_WLED_AVDD_MIN_TRIM_VALUE 0x0
#define QPNP_WLED_AVDD_MAX_TRIM_VALUE 0xF
#define QPNP_WLED_AVDD_SET_BIT BIT(4)
-
+ int myflag;
@@ -841,16 +843,29 @@ static void qpnp_wled_set(struct led_classdev *led_cdev,
enum led_brightness level)
{
struct qpnp_wled *wled;
-
+
wled = container_of(led_cdev, struct qpnp_wled, cdev);
if (level < LED_OFF)
level = LED_OFF;
else if (level > wled->cdev.max_brightness)
level = wled->cdev.max_brightness;
-
wled->cdev.brightness = level;
- schedule_work(&wled->work);
+if(level ==0)
+{
+ printk("zch--- set backlight brightness= %d\n",level);
+
+ myflag =1;
+}
+else
+{
+if(myflag)
+{
+ myflag =0;
+ printk("zch--- set backlight brightness= %d\n",level);
+}
+
+} schedule_work(&wled->work);
}
static int qpnp_wled_set_disp(struct qpnp_wled *wled, u16 base_addr)
标签：Good,亮灭,ctrl,pdata,fb,qcom,dsi,mdss,panel 来源： https://blog.csdn.net/zmjames2000/article/details/87916830
本站声明： 1. iCode9 技术分享网（下文简称本站）提供的所有内容，仅供技术学习、探讨和分享； 2. 关于本站的所有留言、评论、转载及引用，纯属内容发起人的个人观点，与本站观点和立场无关； 3. 关于本站的所有言论和文字，纯属内容发起人的个人观点，与本站观点和立场无关； 4. 本站文章均是网友提供，不完全保证技术分享内容的完整性、准确性、时效性、风险性和版权归属；如您发现该文章侵犯了您的权益，可联系我们第一时间进行删除； 5. 本站为非盈利性的个人网站，所有内容不会用来进行牟利，也不会利用任何形式的广告来间接获益，纯粹是为了广大技术爱好者提供技术内容和技术思想的分享性交流网站。