标签：mut OFDM signal length 源码 sig matlab bit data
实验原理 链接: https://blog.csdn.net/qq_44394952/article/details/122508495.
OFDM.m
//
clear all;
close all;
carrier_count = 200; % 子载波数
symbol_count = 100; %总符号数
ifft_length = 512; % IFFT长度
CP_length = 128; % 循环前缀
CS_length = 20; % 循环后缀
rate = [];
SNR =20;
bit_per_symbol = 4;
alpha = 1.5/32; % 升余弦窗系数
% ================产生随机序列=======================
bit_length = carrier_count*symbol_count*bit_per_symbol;
bit_sequence = round(rand(1,bit_length))'; % 列向量
% =================串并转换==========================
% ==================16QAM调制=========================
% 1-28置零 29-228有效 229-285置零 286-485共轭 486-512置零
carrier_position = 29:228;
conj_position = 485:-1:286;
bit_moded = qammod(bit_sequence,16,'InputType','bit');
figure(1);
scatter(real(bit_moded),imag(bit_moded));
title('调制后的星座图');
grid on;
% ===================IFFT===========================
ifft_position = zeros(ifft_length,symbol_count);
bit_moded = reshape(bit_moded,carrier_count,symbol_count);
figure(2);
stem(abs(bit_moded(:,1)));
grid on;
ifft_position(carrier_position,:)=bit_moded(:,:);
ifft_position(conj_position,:)=conj(bit_moded(:,:));
signal_time = ifft(ifft_position,ifft_length);
figure(3);
subplot(3,1,1)
plot(signal_time(:,1),'b');
title('原始单个OFDM符号');
xlabel('Time');
ylabel('Amplitude');
axis([0 500 -0.5 0.5])
% ==================加循环前缀和后缀==================
signal_time_C = [signal_time(end-CP_length+1:end,:);signal_time];
signal_time_C = [signal_time_C; signal_time_C(1:CS_length,:)]; % 单个完整符号为512+128+20=660
subplot(3,1,2);
plot(signal_time_C(:,1));
xlabel('Time');
ylabel('Amplitude');
title('加CP和CS的单个OFDM符号');
axis([0 500 -0.5 0.5])
% =======================加窗========================
signal_window = zeros(size(signal_time_C));
% 通过矩阵点乘
signal_window = signal_time_C.*repmat(rcoswindow(alpha,size(signal_time_C,1)),1,symbol_count);
subplot(3,1,3)
plot(signal_window(:,1))
title('加窗后的单个OFDM符号')
xlabel('Time');
ylabel('Amplitude');
axis([0 500 -0.5 0.5])
% ===================发送信号，多径信道====================
signal_Tx = reshape(signal_window,1,[]); % 并串转换，变成时域一个完整信号，待传输
signal_origin = reshape(signal_time_C,1,[]); % 未加窗完整信号
mult_path_am = [1 0.2 0.1]; % 多径幅度
mutt_path_time = [0 20 50]; % 多径时延
windowed_Tx = zeros(size(signal_Tx));
path2 = 0.2*[zeros(1,20) signal_Tx(1:end-20) ];
path3 = 0.1*[zeros(1,50) signal_Tx(1:end-50) ];
signal_Tx_mult = signal_Tx + path2 + path3; % 多径信号
figure(4)
subplot(2,1,1)
plot(signal_Tx)
title('单径下OFDM信号')
xlabel('Time/samples')
ylabel('Amplitude')
axis([0 1000 -0.5 0.5])
subplot(2,1,2)
plot(signal_Tx_mult)
title('多径下OFDM信号')
xlabel('Time/samples')
ylabel('Amplitude')
axis([0 1000 -0.5 0.5])
% =====================发送信号频谱========================
% 每个符号求频谱再平均，功率取对数
orgin_aver_power = 20*log10(mean(abs(fft(signal_time_C'))));
% ====================加窗信号频谱=========================
figure(5) % 归一化
orgin_aver_power = 20*log10(mean(abs(fft(signal_window'))));
plot((1:length(orgin_aver_power))/length(orgin_aver_power),orgin_aver_power)
hold on
axis([0 1 -40 5])
grid on
title('加窗信号频谱')
% ========================加AWGN==========================
signal_power_sig = var(signal_Tx); % 单径发送信号功率
signal_power_mut = var(signal_Tx_mult); % 多径发送信号功率
SNR_linear = 10^(SNR/10);
noise_power_mut = signal_power_mut/SNR_linear;
noise_power_sig = signal_power_sig/SNR_linear;
noise_sig = randn(size(signal_Tx))*sqrt(noise_power_sig);
noise_mut = randn(size(signal_Tx_mult))*sqrt(noise_power_mut);
Rx_data_sig = signal_Tx+noise_sig;
Rx_data_mut = signal_Tx_mult+noise_mut;
% =======================串并转换==========================
Rx_data_mut = reshape(Rx_data_mut,ifft_length+CS_length+CP_length,[]);
Rx_data_sig = reshape(Rx_data_sig,ifft_length+CS_length+CP_length,[]);
% ====================去循环前缀和后缀======================
Rx_data_sig(1:CP_length,:) = [];
Rx_data_sig(end-CS_length+1:end,:) = [];
Rx_data_mut(1:CP_length,:) = [];
Rx_data_mut(end-CS_length+1:end,:) = [];
% =========================FFT=============================
fft_sig = fft(Rx_data_sig);
fft_mut = fft(Rx_data_mut);
% =========================恢复采样===========================
data_sig = fft_sig(carrier_position,:);
data_mut = fft_mut(carrier_position,:);
figure(6)
scatter(real(reshape(data_sig,1,[])),imag(reshape(data_sig,1,[])),'.')
grid on;
title('单径接收信号星座图')
figure(7)
scatter(real(reshape(data_mut,1,[])),imag(reshape(data_mut,1,[])),'.')
grid on;
title('多径接收信号星座图')
% =========================16QAM逆映射===========================
bit_demod_sig = reshape(qamdemod(data_sig,16,'OutputType','bit'),[],1);
bit_demod_mut = reshape(qamdemod(data_mut,16,'OutputType','bit'),[],1);
% =========================误码率===========================
error_bit_sig = sum(bit_demod_sig~=bit_sequence);
error_bit_mut = sum(bit_demod_mut~=bit_sequence);
error_rate_sig = error_bit_sig/bit_length;
error_rate_mut = error_bit_mut/bit_length;
rate = [rate; error_rate_sig error_rate_mut]
rcoswindow.m
function window=rcoswindow(alpha,bit_length)
warning off;
window = zeros(1,bit_length/2);
t = 1:bit_length/2;
T = bit_length/(2*(1+alpha));
window(t) = 0.5*(1 - sin(pi/(2*alpha*T)*(t-T)));
window(1:(1-alpha)*T) = 1;
window=[fliplr(window) window]';
end
标签：mut,OFDM,signal,length,源码,sig,matlab,bit,data 来源： https://blog.csdn.net/qq_44394952/article/details/122508697
本站声明： 1. iCode9 技术分享网（下文简称本站）提供的所有内容，仅供技术学习、探讨和分享； 2. 关于本站的所有留言、评论、转载及引用，纯属内容发起人的个人观点，与本站观点和立场无关； 3. 关于本站的所有言论和文字，纯属内容发起人的个人观点，与本站观点和立场无关； 4. 本站文章均是网友提供，不完全保证技术分享内容的完整性、准确性、时效性、风险性和版权归属；如您发现该文章侵犯了您的权益，可联系我们第一时间进行删除； 5. 本站为非盈利性的个人网站，所有内容不会用来进行牟利，也不会利用任何形式的广告来间接获益，纯粹是为了广大技术爱好者提供技术内容和技术思想的分享性交流网站。