ICode9

精准搜索请尝试: 精确搜索
  • Linux中的异步套接字 – 轮询与回调通过2019-06-30 06:37:53

    在决定在我的简单服务器(linux)中实现异步套接字时,我遇到了一个问题.我打算继续poll(),并在调用之间做一些清理和缓存.现在这看起来很浪费,所以我做了更多的挖掘,并找到了一种可能在i / o上实现一些回调的方法. 如果我使用O_NONBLOCK创建套接字,使用SIOCSPGRP ioctl()在i / o上发

  • Linux输入设备读取ioctl(EVIOCGKEY())与读取(input_event)2019-06-29 03:40:38

    我的所有代码都基于linuxjournal.com上的一篇文章 here is the article I based my code on 我正在编写一个嵌入式应用程序,我正在尝试从键盘上读取按键.这是我正在使用的代码 uint8_t key_b[KEY_MAX/8 + 1]; memset(key_b, 0, sizeof(key_b)); ioctl(fd, EVIOCGKEY(sizeof(key_b)

  • 在linux下用ioctl重新映射键盘2019-06-28 18:38:12

    我实际上是在尝试编写一个小程序来捕获linux下特定USB键盘的全局键盘输入. 我正在测试这段代码: #include <stdlib.h> #include <unistd.h> #include <fcntl.h> #include <errno.h> #include <linux/input.h> #include <string.h> #include <stdio.h> static const char

  • 可能的原因可能会阻止Linux上的虚拟终端?2019-06-26 23:38:28

    或者是否有可能某些进程或其他东西可以阻止虚拟终端?或者在尝试访问VT1时应用程序挂起的原因是什么? 看来,虽然这种情况正在发生,但它仍然悬挂在函数ioctl中.特别是,这是失败的代码: int vtno = 1; const char* vtname = "/dev/tty1"; int fd = open(vtname, O_RDWR|O_NDELAY, 0);

  • 如何确定linux串口上剩余的写入/输出缓冲区空间量?2019-06-25 16:38:21

    您可以使用ioctl确定从linux下的串行端口读取的数据量.是否可以确定写入时串口的剩余缓冲区空间?实际上,我想将一个数据块写入一个串行端口,只有当它可以一次性卸载时才能成功,或者如果它必须被分块则失败.对端口的写入和读取是非阻塞的.我不希望这是UART缓冲区,而是UART缓冲区之前

  • Linux内核模块 – IOCTL用法返回ENOTTY2019-06-23 12:38:28

    我正在研究小内核模块.我试图使用IOCTL(在ioctl_add中),但是当我调用它时,我会在EN的底部检查它,这是在交换机中检查的.代码如下.有谁知道我做错了什么? user.c的: #include <stdio.h> #include <stdlib.h> #include <stdarg.h> #include <unistd.h> #include <sys/types.h> #includ

  • ltp-ddt wdt_test2019-05-23 09:43:08

    # @name Watchdog Timer getsupport,settimeout,getstatus,keepalive ioctl and write test# @desc Watchdog Timer getsupport,settimeout,getstatus,keepalive ioctl and write test# @requires watchdogWDT_S_FUNC_GETSUPORT source 'common.sh'; do_cmd install

  • linux – 用户权限检查ioctl命令2019-05-19 21:38:05

    我正在实现char驱动程序(Linux),并且我的驱动程序中存在某些IOCTL命令,这些命令只需要由ADMIN执行. 我的问题是如何检查我的ioctl命令实现下的用户权限,并限制非特权用户访问IOCTL.解决方法:您可以使用bool able(int cap)函数,如果用户具有请求的功能,则返回true. cap的可能值列在i

  • Linux 音频设备驱动架构及应用编程2019-04-21 09:52:10

                           最早出现在Linux上的音频编程接口是OSS(Open Sound System),它由一套完整的内核驱动程序模块组成,可以为绝大多数声卡提供统一的编程接口。OSS出现的历史相对较长,这些内核模块中的一部分(OSS/Free)是与Linux内核源码共同免费发布的,另外

  • 彻底分析虚拟视频驱动vivi(三)2019-03-28 20:54:52

    在Ubuntu系统中接上usb摄像头设备时,系统会自动安装对应的usb设备驱动程序。我们现在要使用自己编译的vivi驱动,该怎么办呢?  1.先安装系统自带的vivi驱动和它所依赖的所有驱动:sudo modprobe vivi ;  2.卸载原有的vivi驱动 : sudo rmmod vivi ;  3.装载自己的驱动 :sudo insmod .

  • nvme ioctl解密2019-03-09 21:55:05

    对于Nvme SSD,我们有的时候会用到ioctl系统调用,该调用的流程是怎样的呢? 首先,在注册nvme设备的时候,会初始化该设备的注册了file operations: static const struct file_operations nvme_dev_fops = { .owner = THIS_MODULE, .open = nvme_dev_open, .release

  • The difference among ioctl, unlocked_ioctl and compat_ioctl (RT)2019-01-31 12:03:12

    Meta-answer: All the raw stuff happening to the Linux kernel goes through lkml (the Linux kernel mailing list). For explicative summaries, read or search lwn (Linux weekly news). Answer: From The new way of ioctl() by Jonathan Corbet: ioctl() is one of t

专注分享技术,共同学习,共同进步。侵权联系[81616952@qq.com]

Copyright (C)ICode9.com, All Rights Reserved.

ICode9版权所有