redhat7使用nmtui配置网络

2021-04-14 13:36:18 阅读：272 来源： 互联网

标签：overruns errors bytes RX 网络 nmtui redhat7 ifup ifdown

1、查看当前网卡

[root@localhost Desktop]# ifconfig
eno16777728: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        ether 00:0c:29:af:60:a0  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10<host>
        loop  txqueuelen 0  (Local Loopback)
        RX packets 386  bytes 32780 (32.0 KiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 386  bytes 32780 (32.0 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

2、命令行输入nmtui，出现如下界面，直接回车

3、出现如下界面，选编辑，回车

4、将Automatically改为manual

5、选中show，然后后车

6、出现如下界面

7、设定ip

8、选ok，然后回车

9、选quit

10、再次查看网络

[root@localhost Desktop]# ifconfig
eno16777728: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        ether 00:0c:29:af:60:a0  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10<host>
        loop  txqueuelen 0  (Local Loopback)
        RX packets 642  bytes 54540 (53.2 KiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 642  bytes 54540 (53.2 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

11、进入网卡配置文件目录

[root@localhost Desktop]# cd /etc/sysconfig/network-scripts/
[root@localhost network-scripts]# ls
ifcfg-eno16777728  ifdown-ppp       ifup-eth     ifup-sit
ifcfg-lo           ifdown-routes    ifup-ippp    ifup-Team
ifdown             ifdown-sit       ifup-ipv6    ifup-TeamPort
ifdown-bnep        ifdown-Team      ifup-isdn    ifup-tunnel
ifdown-eth         ifdown-TeamPort  ifup-plip    ifup-wireless
ifdown-ippp        ifdown-tunnel    ifup-plusb   init.ipv6-global
ifdown-ipv6        ifup             ifup-post    network-functions
ifdown-isdn        ifup-aliases     ifup-ppp     network-functions-ipv6
ifdown-post        ifup-bnep        ifup-routes
[root@localhost network-scripts]# pwd
/etc/sysconfig/network-scripts

12、使用vim编辑网卡配置文件，将ONBOOT选项改为yes，意思是自动启动网卡

[root@localhost network-scripts]# vim ifcfg-eno16777728
TYPE=Ethernet
BOOTPROTO=none
DEFROUTE=yes
IPV4_FAILURE_FATAL=no
IPV6INIT=yes
IPV6_AUTOCONF=yes
IPV6_DEFROUTE=yes
IPV6_FAILURE_FATAL=no
NAME=eno16777728
UUID=2acdeb41-84b7-48c4-b552-a4ecca60729f
ONBOOT=yes
HWADDR=00:0C:29:AF:60:A0
IPADDR0=192.168.10.10
PREFIX0=20
IPV6_PEERDNS=yes
IPV6_PEERROUTES=yes

13、重新启动网卡

[root@localhost network-scripts]# systemctl restart network

14、再次查看网络，配置已生效

[root@localhost network-scripts]# ifconfig
eno16777728: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet 192.168.10.10  netmask 255.255.240.0  broadcast 192.168.15.255
        inet6 fe80::20c:29ff:feaf:60a0  prefixlen 64  scopeid 0x20<link>
        ether 00:0c:29:af:60:a0  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 30  bytes 4121 (4.0 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10<host>
        loop  txqueuelen 0  (Local Loopback)
        RX packets 642  bytes 54540 (53.2 KiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 642  bytes 54540 (53.2 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

标签：overruns,errors,bytes,RX,网络,nmtui,redhat7,ifup,ifdown
来源： https://www.cnblogs.com/liujiaxin2018/p/14657328.html

本站声明： 1. iCode9 技术分享网（下文简称本站）提供的所有内容，仅供技术学习、探讨和分享；
2. 关于本站的所有留言、评论、转载及引用，纯属内容发起人的个人观点，与本站观点和立场无关；
3. 关于本站的所有言论和文字，纯属内容发起人的个人观点，与本站观点和立场无关；
4. 本站文章均是网友提供，不完全保证技术分享内容的完整性、准确性、时效性、风险性和版权归属；如您发现该文章侵犯了您的权益，可联系我们第一时间进行删除；
5. 本站为非盈利性的个人网站，所有内容不会用来进行牟利，也不会利用任何形式的广告来间接获益，纯粹是为了广大技术爱好者提供技术内容和技术思想的分享性交流网站。

ICode9

redhat7使用nmtui配置网络