标签：dist img make recipe echo i386 报错 xv6 qemu

XV6操作系统make报错Makefile:192: *** recipe commences before first target. Stop. 的解决方法

  大家好，我叫亓官劼（qí guān jié ），在CSDN中记录学习的点滴历程，时光荏苒，未来可期，加油~博客地址为：亓官劼的博客，B站昵称为：亓官劼，地址为亓官劼的B站

本文原创为亓官劼，请大家支持原创，部分平台一直在盗取博主的文章！！！

  有很多小伙伴在使用XV6操作系统做相关的实验的时候经常会遇到报错Makefile:192: *** recipe commences before first target. Stop.，然后不知错所，这里提供一个可能报错这个情形，以及解决方法(目前仅用这种方法复习了这个报错，如果有其他情形报错一样，可以把Makefile文件发一份过来看一下)。

这里先上一下我这里复习这种报错时的Makefile文件的内容：

OBJS = \
	bio.o\
	console.o\
	exec.o\
	file.o\
	fs.o\
	ide.o\
	ioapic.o\
	kalloc.o\
	kbd.o\
	lapic.o\
	log.o\
	main.o\
	mp.o\
	picirq.o\
	pipe.o\
	proc.o\
	sleeplock.o\
	spinlock.o\
	string.o\
	swtch.o\
	syscall.o\
	sysfile.o\
	sysproc.o\
	trapasm.o\
	trap.o\
	uart.o\
	vectors.o\
	vm.o\

# Cross-compiling (e.g., on Mac OS X)
# TOOLPREFIX = i386-jos-elf

# Using native tools (e.g., on X86 Linux)
#TOOLPREFIX = 

# Try to infer the correct TOOLPREFIX if not set
ifndef TOOLPREFIX
TOOLPREFIX := $(shell if i386-jos-elf-objdump -i 2>&1 | grep '^elf32-i386$$' >/dev/null 2>&1; \
	then echo 'i386-jos-elf-'; \
	elif objdump -i 2>&1 | grep 'elf32-i386' >/dev/null 2>&1; \
	then echo ''; \
	else echo "***" 1>&2; \
	echo "*** Error: Couldn't find an i386-*-elf version of GCC/binutils." 1>&2; \
	echo "*** Is the directory with i386-jos-elf-gcc in your PATH?" 1>&2; \
	echo "*** If your i386-*-elf toolchain is installed with a command" 1>&2; \
	echo "*** prefix other than 'i386-jos-elf-', set your TOOLPREFIX" 1>&2; \
	echo "*** environment variable to that prefix and run 'make' again." 1>&2; \
	echo "*** To turn off this error, run 'gmake TOOLPREFIX= ...'." 1>&2; \
	echo "***" 1>&2; exit 1; fi)
endif

# If the makefile can't find QEMU, specify its path here
# QEMU = qemu-system-i386

# Try to infer the correct QEMU
ifndef QEMU
QEMU = $(shell if which qemu > /dev/null; \
	then echo qemu; exit; \
	elif which qemu-system-i386 > /dev/null; \
	then echo qemu-system-i386; exit; \
	elif which qemu-system-x86_64 > /dev/null; \
	then echo qemu-system-x86_64; exit; \
	else \
	qemu=/Applications/Q.app/Contents/MacOS/i386-softmmu.app/Contents/MacOS/i386-softmmu; \
	if test -x $$qemu; then echo $$qemu; exit; fi; fi; \
	echo "***" 1>&2; \
	echo "*** Error: Couldn't find a working QEMU executable." 1>&2; \
	echo "*** Is the directory containing the qemu binary in your PATH" 1>&2; \
	echo "*** or have you tried setting the QEMU variable in Makefile?" 1>&2; \
	echo "***" 1>&2; exit 1)
endif

CC = $(TOOLPREFIX)gcc
AS = $(TOOLPREFIX)gas
LD = $(TOOLPREFIX)ld
OBJCOPY = $(TOOLPREFIX)objcopy
OBJDUMP = $(TOOLPREFIX)objdump
CFLAGS = -fno-pic -static -fno-builtin -fno-strict-aliasing -O2 -Wall -MD -ggdb -m32 -Werror -fno-omit-frame-pointer
CFLAGS += $(shell $(CC) -fno-stack-protector -E -x c /dev/null >/dev/null 2>&1 && echo -fno-stack-protector)
ASFLAGS = -m32 -gdwarf-2 -Wa,-divide
# FreeBSD ld wants ``elf_i386_fbsd''
LDFLAGS += -m $(shell $(LD) -V | grep elf_i386 2>/dev/null | head -n 1)

# Disable PIE when possible (for Ubuntu 16.10 toolchain)
ifneq ($(shell $(CC) -dumpspecs 2>/dev/null | grep -e '[^f]no-pie'),)
CFLAGS += -fno-pie -no-pie
endif
ifneq ($(shell $(CC) -dumpspecs 2>/dev/null | grep -e '[^f]nopie'),)
CFLAGS += -fno-pie -nopie
endif

xv6.img: bootblock kernel
	dd if=/dev/zero of=xv6.img count=10000
	dd if=bootblock of=xv6.img conv=notrunc
	dd if=kernel of=xv6.img seek=1 conv=notrunc

xv6memfs.img: bootblock kernelmemfs
	dd if=/dev/zero of=xv6memfs.img count=10000
	dd if=bootblock of=xv6memfs.img conv=notrunc
	dd if=kernelmemfs of=xv6memfs.img seek=1 conv=notrunc

bootblock: bootasm.S bootmain.c
	$(CC) $(CFLAGS) -fno-pic -O -nostdinc -I. -c bootmain.c
	$(CC) $(CFLAGS) -fno-pic -nostdinc -I. -c bootasm.S
	$(LD) $(LDFLAGS) -N -e start -Ttext 0x7C00 -o bootblock.o bootasm.o bootmain.o
	$(OBJDUMP) -S bootblock.o > bootblock.asm
	$(OBJCOPY) -S -O binary -j .text bootblock.o bootblock
	./sign.pl bootblock

entryother: entryother.S
	$(CC) $(CFLAGS) -fno-pic -nostdinc -I. -c entryother.S
	$(LD) $(LDFLAGS) -N -e start -Ttext 0x7000 -o bootblockother.o entryother.o
	$(OBJCOPY) -S -O binary -j .text bootblockother.o entryother
	$(OBJDUMP) -S bootblockother.o > entryother.asm

initcode: initcode.S
	$(CC) $(CFLAGS) -nostdinc -I. -c initcode.S
	$(LD) $(LDFLAGS) -N -e start -Ttext 0 -o initcode.out initcode.o
	$(OBJCOPY) -S -O binary initcode.out initcode
	$(OBJDUMP) -S initcode.o > initcode.asm

kernel: $(OBJS) entry.o entryother initcode kernel.ld
	$(LD) $(LDFLAGS) -T kernel.ld -o kernel entry.o $(OBJS) -b binary initcode entryother
	$(OBJDUMP) -S kernel > kernel.asm
	$(OBJDUMP) -t kernel | sed '1,/SYMBOL TABLE/d; s/ .* / /; /^$$/d' > kernel.sym

# kernelmemfs is a copy of kernel that maintains the
# disk image in memory instead of writing to a disk.
# This is not so useful for testing persistent storage or
# exploring disk buffering implementations, but it is
# great for testing the kernel on real hardware without
# needing a scratch disk.
MEMFSOBJS = $(filter-out ide.o,$(OBJS)) memide.o
kernelmemfs: $(MEMFSOBJS) entry.o entryother initcode kernel.ld fs.img
	$(LD) $(LDFLAGS) -T kernel.ld -o kernelmemfs entry.o  $(MEMFSOBJS) -b binary initcode entryother fs.img
	$(OBJDUMP) -S kernelmemfs > kernelmemfs.asm
	$(OBJDUMP) -t kernelmemfs | sed '1,/SYMBOL TABLE/d; s/ .* / /; /^$$/d' > kernelmemfs.sym

tags: $(OBJS) entryother.S _init
	etags *.S *.c

vectors.S: vectors.pl
	./vectors.pl > vectors.S

ULIB = ulib.o usys.o printf.o umalloc.o

_%: %.o $(ULIB)
	$(LD) $(LDFLAGS) -N -e main -Ttext 0 -o $@ $^
	$(OBJDUMP) -S $@ > $*.asm
	$(OBJDUMP) -t $@ | sed '1,/SYMBOL TABLE/d; s/ .* / /; /^$$/d' > $*.sym

_forktest: forktest.o $(ULIB)
	# forktest has less library code linked in - needs to be small
	# in order to be able to max out the proc table.
	$(LD) $(LDFLAGS) -N -e main -Ttext 0 -o _forktest forktest.o ulib.o usys.o
	$(OBJDUMP) -S _forktest > forktest.asm

mkfs: mkfs.c fs.h
	gcc -Werror -Wall -o mkfs mkfs.c

# Prevent deletion of intermediate files, e.g. cat.o, after first build, so
# that disk image changes after first build are persistent until clean.  More
# details:
# http://www.gnu.org/software/make/manual/html_node/Chained-Rules.html
.PRECIOUS: %.o

UPROGS=\
	_cat\
	_echo\
	_forktest\
	_grep\
	_init\
	_kill\
	_ln\
	_ls\
	_mkdir\
	_rm\
	_sh\
	_stressfs\
	_usertests\
	_wc\
	_zombie\
fs.img: mkfs README $(UPROGS)
	./mkfs fs.img README $(UPROGS)

-include *.d

clean: 
	rm -f *.tex *.dvi *.idx *.aux *.log *.ind *.ilg \
	*.o *.d *.asm *.sym vectors.S bootblock entryother \
	initcode initcode.out kernel xv6.img fs.img kernelmemfs \
	xv6memfs.img mkfs .gdbinit \
	$(UPROGS)

# make a printout
FILES = $(shell grep -v '^\#' runoff.list)
PRINT = runoff.list runoff.spec README toc.hdr toc.ftr $(FILES)

xv6.pdf: $(PRINT)
	./runoff
	ls -l xv6.pdf

print: xv6.pdf

# run in emulators

bochs : fs.img xv6.img
	if [ ! -e .bochsrc ]; then ln -s dot-bochsrc .bochsrc; fi
	bochs -q

# try to generate a unique GDB port
GDBPORT = $(shell expr `id -u` % 5000 + 25000)
# QEMU's gdb stub command line changed in 0.11
QEMUGDB = $(shell if $(QEMU) -help | grep -q '^-gdb'; \
	then echo "-gdb tcp::$(GDBPORT)"; \
	else echo "-s -p $(GDBPORT)"; fi)
ifndef CPUS
CPUS := 2
endif
QEMUOPTS = -drive file=fs.img,index=1,media=disk,format=raw -drive file=xv6.img,index=0,media=disk,format=raw -smp $(CPUS) -m 512 $(QEMUEXTRA)

qemu: fs.img xv6.img
	$(QEMU) -serial mon:stdio $(QEMUOPTS)

qemu-memfs: xv6memfs.img
	$(QEMU) -drive file=xv6memfs.img,index=0,media=disk,format=raw -smp $(CPUS) -m 256

qemu-nox: fs.img xv6.img
	$(QEMU) -nographic $(QEMUOPTS)

.gdbinit: .gdbinit.tmpl
	sed "s/localhost:1234/localhost:$(GDBPORT)/" < $^ > $@

qemu-gdb: fs.img xv6.img .gdbinit
	@echo "*** Now run 'gdb'." 1>&2
	$(QEMU) -serial mon:stdio $(QEMUOPTS) -S $(QEMUGDB)

qemu-nox-gdb: fs.img xv6.img .gdbinit
	@echo "*** Now run 'gdb'." 1>&2
	$(QEMU) -nographic $(QEMUOPTS) -S $(QEMUGDB)

# CUT HERE
# prepare dist for students
# after running make dist, probably want to
# rename it to rev0 or rev1 or so on and then
# check in that version.

EXTRA=\
	mkfs.c ulib.c user.h cat.c echo.c forktest.c grep.c kill.c\
	ln.c ls.c mkdir.c rm.c stressfs.c usertests.c wc.c zombie.c\
	printf.c umalloc.c\
	README dot-bochsrc *.pl toc.* runoff runoff1 runoff.list\
	.gdbinit.tmpl gdbutil\

dist:
	rm -rf dist
	mkdir dist
	for i in $(FILES); \
	do \
		grep -v PAGEBREAK $$i >dist/$$i; \
	done
	sed '/CUT HERE/,$$d' Makefile >dist/Makefile
	echo >dist/runoff.spec
	cp $(EXTRA) dist

dist-test:
	rm -rf dist
	make dist
	rm -rf dist-test
	mkdir dist-test
	cp dist/* dist-test
	cd dist-test; $(MAKE) print
	cd dist-test; $(MAKE) bochs || true
	cd dist-test; $(MAKE) qemu

# update this rule (change rev#) when it is time to
# make a new revision.
tar:
	rm -rf /tmp/xv6
	mkdir -p /tmp/xv6
	cp dist/* dist/.gdbinit.tmpl /tmp/xv6
	(cd /tmp; tar cf - xv6) | gzip >xv6-rev10.tar.gz  # the next one will be 10 (9/17)

.PHONY: dist-test dist

解决方法：其实很简单，因为你在fs.img:少了一个空行，可能是修改的时候把这个空行不小心删除了，导致了他的错误。在图示位置将UPROGS结尾加一个空行即可。

  大家好，我叫亓官劼（qí guān jié ），在CSDN中记录学习的点滴历程，时光荏苒，未来可期，加油~博客地址为：亓官劼的博客，B站昵称为：亓官劼，地址为亓官劼的B站

本文原创为亓官劼，请大家支持原创，部分平台一直在盗取博主的文章！！！

标签：dist,img,make,recipe,echo,i386,报错,xv6,qemu
来源： https://blog.csdn.net/qq_43422111/article/details/106302576

本站声明： 1. iCode9 技术分享网（下文简称本站）提供的所有内容，仅供技术学习、探讨和分享；
2. 关于本站的所有留言、评论、转载及引用，纯属内容发起人的个人观点，与本站观点和立场无关；
3. 关于本站的所有言论和文字，纯属内容发起人的个人观点，与本站观点和立场无关；
4. 本站文章均是网友提供，不完全保证技术分享内容的完整性、准确性、时效性、风险性和版权归属；如您发现该文章侵犯了您的权益，可联系我们第一时间进行删除；
5. 本站为非盈利性的个人网站，所有内容不会用来进行牟利，也不会利用任何形式的广告来间接获益，纯粹是为了广大技术爱好者提供技术内容和技术思想的分享性交流网站。