标签：docker1 flanneld network etcd 172.17 docker root 路由 flannel
1.flannel介绍
flannel是coreos开发的容器网络解决方案。flannel为每个host分配一个subnet，容器从此subnet中分配ip。这些ip可以在host间路由，容器间无需nat和port mapping就可以跨主机通讯。
每个subnet都是从一个更大的ip池中划分的，flannel会在每个主机上运行一个叫flanneld得agent，其职责是从ip池中分配subnet。为了在各个主机间共享信息，flannel用etcd存放网络配置，已分配的subnet，host的ip等信息。
数据包通过backend在主机间转发。
flannel提供了多种backend，最常用的有vxlan和host-gw。
2.部署实验环境
三个虚机
docker1 docker2 docker3?
etcd安装在docker1
docker1 docker2 docker3上运行flanneld
注:为了更方便的验证flannel和etcd所以docker1也安装了flannel，
其实可以不用在docker1安装
centos7自带了软件包，直接yum安装即可
2.1?
安装配置etcd
yum -y install etcd
[root@docker1 ~]# systemctl start etcd? && systemctl enable etcd
[root@docker1 ~]#测试下
[root@docker1 ~]# etcd --version
etcd Version: 3.2.18
Git SHA: eddf599
Go Version: go1.9.4
Go OS/Arch: linux/amd64
[root@docker1 ~]#
[root@docker1 ~]# etcdctl set test "a"
a
[root@docker1 ~]# etcdctl get test
a
[root@docker1 ~]#2.2?
安装配置flannel
[root@docker1 ~]# yum -y install flannel启动
[root@docker1 ~]# systemctl start flanneld报错
[root@docker1 ~]# systemctl status flanneld -l
● flanneld.service - Flanneld overlay address etcd agent
?? Loaded: loaded (/usr/lib/systemd/system/flanneld.service; disabled; vendor preset: disabled)
?? Active: activating (start) since Thu 2018-06-14 02:22:26 EDT; 1min 1s ago
Main PID: 2950 (flanneld)
?? Memory: 16.6M
?? CGroup: /system.slice/flanneld.service
? ? ? ? ?? └─2950 /usr/bin/flanneld -etcd-endpoints=http://127.0.0.1:2379 -etcd-prefix=/atomic.io/network
Jun 14 02:23:18 docker1 flanneld-start[2950]: E0614 02:23:18.974351? ? 2950 network.go:102] failed to retrieve network config: 100: Key not found (/atomic.io) [11]
Jun 14 02:23:19 docker1 flanneld-start[2950]: E0614 02:23:19.977497? ? 2950 network.go:102] failed to retrieve network config: 100: Key not found (/atomic.io) [11]
Jun 14 02:23:20 docker1 flanneld-start[2950]: E0614 02:23:20.980721? ? 2950 network.go:102] failed to retrieve network config: 100: Key not found (/atomic.io) [11]
Jun 14 02:23:21 docker1 flanneld-start[2950]: E0614 02:23:21.983553? ? 2950 network.go:102] failed to retrieve network config: 100: Key not found (/atomic.io) [11]
Jun 14 02:23:22 docker1 flanneld-start[2950]: E0614 02:23:22.988446? ? 2950 network.go:102] failed to retrieve network config: 100: Key not found (/atomic.io) [11]
Jun 14 02:23:23 docker1 flanneld-start[2950]: E0614 02:23:23.992106? ? 2950 network.go:102] failed to retrieve network config: 100: Key not found (/atomic.io) [11]
Jun 14 02:23:24 docker1 flanneld-start[2950]: E0614 02:23:24.994719? ? 2950 network.go:102] failed to retrieve network config: 100: Key not found (/atomic.io) [11]
Jun 14 02:23:25 docker1 flanneld-start[2950]: E0614 02:23:25.998629? ? 2950 network.go:102] failed to retrieve network config: 100: Key not found (/atomic.io) [11]
Jun 14 02:23:27 docker1 flanneld-start[2950]: E0614 02:23:27.002486? ? 2950 network.go:102] failed to retrieve network config: 100: Key not found (/atomic.io) [11]
Jun 14 02:23:28 docker1 flanneld-start[2950]: E0614 02:23:28.006185? ? 2950 network.go:102] failed to retrieve network config: 100: Key not found (/atomic.io) [11]注意-etcd-prefix=/automic.io/network
flanel读取的网络配置是这个文件，这个文件是在
[root@docker1 ~]# cat /usr/lib/systemd/system/flanneld.service
[Unit]
Description=Flanneld overlay address etcd agent
After=network.target
After=network-online.target
Wants=network-online.target
After=etcd.service
Before=docker.service
[Service]
Type=notify
EnvironmentFile=/etc/sysconfig/flanneld
EnvironmentFile=-/etc/sysconfig/docker-network
ExecStart=/usr/bin/flanneld-start $FLANNEL_OPTIONS
ExecStartPost=/usr/libexec/flannel/mk-docker-opts.sh -k DOCKER_NETWORK_OPTIONS -d /run/flannel/docker
Restart=on-failure
[Install]
WantedBy=multi-user.target
RequiredBy=docker.service[root@docker1 sysconfig]# cat flanneld
# Flanneld configuration options?
# etcd url location.? Point this to the server where etcd runs
FLANNEL_ETCD_ENDPOINTS="http://127.0.0.1:2379"
# etcd config key.? This is the configuration key that flannel queries
# For address range assignment
FLANNEL_ETCD_PREFIX="/atomic.io/network"
# Any additional options that you want to pass
#FLANNEL_OPTIONS=""注意：
FLANNEL_ETCD_PREFIX="/atomic.io/network"
这个FLANNEL_ETCD_PREFIX需要etcdctl手动去建立
[root@docker1 ~]# etcdctl mk /atomic.io/network/config ‘{"Network":"172.17.0.0/16", "SubnetMin": "172.17.1.0", "SubnetMax": "172.17.254.0", "Backend":{"Type":"vxlan"}}‘再启动flannel，启动正常
[root@docker1 ~]# systemctl start flanneld && systemctl enable flanneld
Created symlink from /etc/systemd/system/multi-user.target.wants/flanneld.service to /usr/lib/systemd/system/flanneld.service.
Created symlink from /etc/systemd/system/docker.service.requires/flanneld.service to /usr/lib/systemd/system/flanneld.service.
[root@docker1 ~]#[root@docker1 ~]# systemctl status flanneld
● flanneld.service - Flanneld overlay address etcd agent
?? Loaded: loaded (/usr/lib/systemd/system/flanneld.service; disabled; vendor preset: disabled)
?? Active: active (running) since Thu 2018-06-14 02:47:58 EDT; 11s ago
? Process: 3513 ExecStartPost=/usr/libexec/flannel/mk-docker-opts.sh -k DOCKER_NETWORK_OPTIONS -d /run/flannel/docker (code=exited, status=0/SUCCESS)
Main PID: 3475 (flanneld)
?? Memory: 18.5M
?? CGroup: /system.slice/flanneld.service
? ? ? ? ?? └─3475 /usr/bin/flanneld -etcd-endpoints=http://127.0.0.1:2379 -etcd-prefix=/atomic.io/network
Jun 14 02:47:52 docker1 flanneld-start[3475]: E0614 02:47:52.150129? ? 3475 network.go:102] failed to retrieve network co...) [14]
Jun 14 02:47:53 docker1 flanneld-start[3475]: E0614 02:47:53.152602? ? 3475 network.go:102] failed to retrieve network co...) [14]
Jun 14 02:47:54 docker1 flanneld-start[3475]: E0614 02:47:54.155402? ? 3475 network.go:102] failed to retrieve network co...) [14]
Jun 14 02:47:55 docker1 flanneld-start[3475]: E0614 02:47:55.158612? ? 3475 network.go:102] failed to retrieve network co...) [14]
Jun 14 02:47:56 docker1 flanneld-start[3475]: E0614 02:47:56.164481? ? 3475 network.go:102] failed to retrieve network co...) [14]
Jun 14 02:47:57 docker1 flanneld-start[3475]: E0614 02:47:57.168282? ? 3475 network.go:102] failed to retrieve network co...) [14]
Jun 14 02:47:58 docker1 flanneld-start[3475]: I0614 02:47:58.179298? ? 3475 local_manager.go:179] Picking subnet in range....254.0
Jun 14 02:47:58 docker1 flanneld-start[3475]: I0614 02:47:58.261220? ? 3475 manager.go:250] Lease acquired: 172.17.21.0/24
Jun 14 02:47:58 docker1 flanneld-start[3475]: I0614 02:47:58.261993? ? 3475 network.go:98] Watching for new subnet leases
Jun 14 02:47:58 docker1 systemd[1]: Started Flanneld overlay address etcd agent.
Hint: Some lines were ellipsized, use -l to show in full.看看这个脚本
Process: 3513 ExecStartPost=/usr/libexec/flannel/mk-docker-opts.sh -k DOCKER_NETWORK_OPTIONS -d /run/flannel/docker (code=exited, status=0/SUCCESS)
flannel_env="/run/flannel/subnet.env"
docker_env="/run/docker_opts.env"
combined_opts_key="DOCKER_OPTS"
indiv_opts=false
combined_opts=false
ipmasq=true检查下文件内容，我感觉是根据这个文件来生成网段，不确认
[root@docker1 flannel]# cat /run/flannel/subnet.env
FLANNEL_NETWORK=172.17.0.0/16
FLANNEL_SUBNET=172.17.21.1/24
FLANNEL_MTU=1472
FLANNEL_IPMASQ=false看看ip段
[root@docker1 ~]# ip a |grep flannel
11: flannel0: <POINTOPOINT,MULTICAST,NOARP,UP,LOWER_UP> mtu 1472 qdisc pfifo_fast state UNKNOWN qlen 500
? ? inet 172.17.21.0/16 scope global flannel0
[root@docker1 ~]#以上都是docker1上的操作
2.3?
docker2,docker3上的操作是一样的，我记录docker2上的操作
[root@docker2 ~]# yum -y install flannel启动flannel
[root@docker2 ~]# flanneld -etcd-endpoints=http://192.168.211.140:2379 -iface=ens33 -etcd-prefix=/atomic.io/network
I0614 04:28:55.785204? ? 2767 main.go:132] Installing signal handlers
I0614 04:28:55.785764? ? 2767 manager.go:149] Using interface with name ens33 and address 192.168.211.154
I0614 04:28:55.785784? ? 2767 manager.go:166] Defaulting external address to interface address (192.168.211.154)
E0614 04:28:55.786742? ? 2767 network.go:102] failed to retrieve network config: client: etcd cluster is unavailable or misconfigured; error #0: dial tcp 192.168.211.140:2379: getsockopt: no route to host
E0614 04:28:57.788671? ? 2767 network.go:102] failed to retrieve network config: client: etcd cluster is unavailable or misconfigured; error #0: dial tcp 192.168.211.140:2379: i/o timeout
E0614 04:28:59.791359? ? 2767 network.go:102] failed to retrieve network config: client: etcd cluster is unavailable or misconfigured; error #0: dial tcp 192.168.211.140:2379: i/o timeout报错了
这个错误是因为etcd默认只监听本机的2379端口
[root@docker1 ~]# cat /etc/etcd/etcd.conf
#[Member]
#ETCD_CORS=""
ETCD_DATA_DIR="/var/lib/etcd/default.etcd"
#ETCD_WAL_DIR=""
#ETCD_LISTEN_PEER_URLS="http://localhost:2380"
ETCD_LISTEN_CLIENT_URLS="http://localhost:2379"
#ETCD_MAX_SNAPSHOTS="5"
#ETCD_MAX_WALS="5"
ETCD_NAME="default"
#ETCD_SNAPSHOT_COUNT="100000"把ETCD_LISTEN_CLIENT_URLS="http://localhost:2379"改成ETCD_LISTEN_CLIENT_URLS="http://0.0.0.0:2379"
重新启动etcd
[root@docker1 ~]# systemctl restart etcd
[root@docker1 ~]# systemctl status etcd
● etcd.service - Etcd Server
?? Loaded: loaded (/usr/lib/systemd/system/etcd.service; enabled; vendor preset: disabled)
?? Active: active (running) since Thu 2018-06-14 04:38:49 EDT; 1min 11s ago
Main PID: 3401 (etcd)
?? Memory: 21.5M
?? CGroup: /system.slice/etcd.service
? ? ? ? ?? └─3401 /usr/bin/etcd --name=default --data-dir=/var/lib/etcd/default.etcd --listen-client-urls=http://0.0.0.0:23...
Jun 14 04:38:48 docker1 etcd[3401]: enabled capabilities for version 3.2
Jun 14 04:38:49 docker1 etcd[3401]: 8e9e05c52164694d is starting a new election at term 9
Jun 14 04:38:49 docker1 etcd[3401]: 8e9e05c52164694d became candidate at term 10
Jun 14 04:38:49 docker1 etcd[3401]: 8e9e05c52164694d received MsgVoteResp from 8e9e05c52164694d at term 10
Jun 14 04:38:49 docker1 etcd[3401]: 8e9e05c52164694d became leader at term 10
Jun 14 04:38:49 docker1 etcd[3401]: raft.node: 8e9e05c52164694d elected leader 8e9e05c52164694d at term 10
Jun 14 04:38:49 docker1 etcd[3401]: published {Name:default ClientURLs:[http://192.168.211.140:2379]} to cluster cdf8...3a8c32
Jun 14 04:38:49 docker1 etcd[3401]: ready to serve client requests
Jun 14 04:38:49 docker1 systemd[1]: Started Etcd Server.
Jun 14 04:38:49 docker1 etcd[3401]: serving insecure client requests on [::]:2379, this is strongly discouraged!
Hint: Some lines were ellipsized, use -l to show in full.
[root@docker1 ~]#再启动还是报错?
[root@docker2 ~]# systemctl status flanneld -l
● flanneld.service - Flanneld overlay address etcd agent
?? Loaded: loaded (/usr/lib/systemd/system/flanneld.service; disabled; vendor preset: disabled)
?? Active: inactive (dead)
Jun 14 04:21:53 docker2 flanneld-start[2706]: E0614 04:21:53.879476? ? 2706 network.go:102] failed to retrieve network config: client: etcd cluster is unavailable or misconfigured; error #0: dial tcp 127.0.0.1:2379: getsockopt: connection refused
Jun 14 04:21:54 docker2 flanneld-start[2706]: E0614 04:21:54.880962? ? 2706 network.go:102] failed to retrieve network config: client: etcd cluster is unavailable or misconfigured; error #0: dial tcp 127.0.0.1:2379: getsockopt: connection refused
Jun 14 04:21:55 docker2 flanneld-start[2706]: E0614 04:21:55.882332? ? 2706 network.go:102] failed to retrieve network config: client: etcd cluster is unavailable or misconfigured; error #0: dial tcp 127.0.0.1:2379: getsockopt: connection refused
Jun 14 04:21:56 docker2 flanneld-start[2706]: E0614 04:21:56.887002? ? 2706 network.go:102] failed to retrieve network config: client: etcd cluster is unavailable or misconfigured; error #0: dial tcp 127.0.0.1:2379: getsockopt: connection refused
Jun 14 04:21:57 docker2 flanneld-start[2706]: E0614 04:21:57.888246? ? 2706 network.go:102] failed to retrieve network config: client: etcd cluster is unavailable or misconfigured; error #0: dial tcp 127.0.0.1:2379: getsockopt: connection refused
Jun 14 04:21:58 docker2 flanneld-start[2706]: E0614 04:21:58.889903? ? 2706 network.go:102] failed to retrieve network config: client: etcd cluster is unavailable or misconfigured; error #0: dial tcp 127.0.0.1:2379: getsockopt: connection refused
Jun 14 04:21:59 docker2 flanneld-start[2706]: E0614 04:21:59.891323? ? 2706 network.go:102] failed to retrieve network config: client: etcd cluster is unavailable or misconfigured; error #0: dial tcp 127.0.0.1:2379: getsockopt: connection refused
Jun 14 04:22:00 docker2 flanneld-start[2706]: E0614 04:22:00.892229? ? 2706 network.go:102] failed to retrieve network config: client: etcd cluster is unavailable or misconfigured; error #0: dial tcp 127.0.0.1:2379: getsockopt: connection refused
Jun 14 04:22:01 docker2 systemd[1]: Stopped Flanneld overlay address etcd agent.
Jun 14 04:22:01 docker2 flanneld-start[2706]: I0614 04:22:01.105679? ? 2706 main.go:172] Exiting...
[root@docker2 ~]#拒绝连接，应该是防火墙的问题了
关闭docker1的防火墙
[root@docker2 ~]# flanneld -etcd-endpoints=http://192.168.211.140:2379 -iface=ens33 -etcd-prefix=/atomic.io/network &
[1] 2938
[root@docker2 ~]# I0614 04:44:03.522494? ? 2938 main.go:132] Installing signal handlers
I0614 04:44:03.523151? ? 2938 manager.go:149] Using interface with name ens33 and address 192.168.211.154
I0614 04:44:03.523174? ? 2938 manager.go:166] Defaulting external address to interface address (192.168.211.154)
I0614 04:44:03.530498? ? 2938 local_manager.go:134] Found lease (172.17.41.0/24) for current IP (192.168.211.154), reusing
I0614 04:44:03.546625? ? 2938 manager.go:250] Lease acquired: 172.17.41.0/24
I0614 04:44:03.547228? ? 2938 network.go:98] Watching for new subnet leases
I0614 04:44:03.558669? ? 2938 network.go:191] Subnet added: 172.17.21.0/24
[root@docker2 ~]# ip a |grep flannel
8: flannel0: <POINTOPOINT,MULTICAST,NOARP,UP,LOWER_UP> mtu 1472 qdisc pfifo_fast state UNKNOWN group default qlen 500
? ? inet 172.17.41.0/16 scope global flannel0
[root@docker2 ~]#启动了
有点奇怪，重启docker1后，可以进来了，不需要添加开放2379的规则
2.4?
docker3做一样的操作
3.分析flannel网络
?
3.1
上面把基本架构部署好了，具体如下:docker1安装了etcd，docker1 docker2 docker3都安装了flannel
在docker1上查看设置分配的网段和已经分配的网段
设置分配的网段
[root@docker1 ~]#? etcdctl get atomic.io/network/config
{"Network":"172.17.0.0/16", "SubnetMin": "172.17.1.0", "SubnetMax": "172.17.254.0", "Backend":{"Type":"vxlan"}}已经分配的网段
[root@docker1 ~]# etcdctl ls atomic.io/network/subnets
/atomic.io/network/subnets/172.17.21.0-24
/atomic.io/network/subnets/172.17.41.0-24
/atomic.io/network/subnets/172.17.95.0-24
[root@docker1 ~]#3.2
docker中使用flannel网络
配置docker连接flannel，我这里用docker2和docker3
?
docker通过修改docker配置文件
/etc/systemd/system/docker.service
设置 --bip 和--mtu
连接flannel
--bip --mtu的值 ? 来自/run/flannel/subnet.env
[root@docker2 ~]#? cat /run/flannel/subnet.env
FLANNEL_NETWORK=172.17.0.0/16
FLANNEL_SUBNET=172.17.65.1/24
FLANNEL_MTU=1450
FLANNEL_IPMASQ=false--bip ?是 FLANNEL_SUBNET的值
--mtu 是 FLANNEL_MTU的值
在docker.service加上这两个值
[root@docker2 ~]# cat /etc/systemd/system/docker.service
[Unit]
Description=Docker Application Container Engine
After=network.target
[Service]
Type=notify
ExecStart=/usr/bin/dockerd -H tcp://0.0.0.0:2376 -H unix:///var/run/docker.sock --storage-driver devicemapper --tlsverify --tlscacert /etc/docker/ca.pem --tlscert /etc/docker/server.pem --tlskey /etc/docker/server-key.pem --label provider=generic --bip=172.17.65.1/24 --mtu=1450
ExecReload=/bin/kill -s HUP
MountFlags=slave重启docker
[root@docker2 ~]# systemctl daemon-reload
[root@docker2 ~]# systemctl restart docker.service3.2
简易分析
docker连接上flannel后，网络路由和bridge 情况，参考如下
[root@docker2 ~]# ip r
default via 192.168.211.2 dev ens33 proto dhcp metric 100
172.17.0.0/16 dev flannel.1
172.17.65.0/24 dev docker0 proto kernel scope link src 172.17.65.1
172.18.0.0/16 dev docker_gwbridge proto kernel scope link src 172.18.0.1
192.168.211.0/24 dev ens33 proto kernel scope link src 192.168.211.154 metric 100[root@docker2 ~]# brctl show
bridge name? ? ? ? bridge id? ? ? ? ? ? ? ? STP enabled? ? ? ? interfaces
docker0? ? ? ? ? ? ? ? 8000.02427f17e635? ? ? ? no? ? ? ? ? ? ? ? veth7680282
docker_gwbridge? ? ? ? ? ? ? ? 8000.024266f01344? ? ? ? no? ? ? ? ? ? ? ?
[root@docker2 ~]#没有生成新的网桥，使用默认的docker0
172.17.65.0 同一docker主机 容器通过docker0连接
172.17.0.0 ? 不同docker主机 容器通过flannel.1转发
3.3?
容器连接flannel网络
[root@docker2 ~]# docker run -itd --name bbox1 busybox
dc344e4b30e48bbc5b914edc3724e43d56fa0ee7abf97246dc35ce57b6cf872c
[root@docker2 ~]# docker exec bbox1 ip r
default via 172.17.65.1 dev eth0
172.17.65.0/24 dev eth0 scope link? src 172.17.65.2
[root@docker2 ~]#
[root@docker3 ~]# docker run -itd --name bbox2 busybox
e9e824f93e8dedb498f436b169ed8dcb85bc951f4d05ae4f254aad1e3d538a8a
[root@docker3 ~]# docker exec bbox2 ip r
default via 172.17.16.1 dev eth0
172.17.16.0/24 dev eth0 scope link? src 172.17.16.2
[root@docker3 ~]#互ping
[root@docker2 ~]# docker exec bbox1 ping -c 5 172.17.16.2
PING 172.17.16.2 (172.17.16.2): 56 data bytes
64 bytes from 172.17.16.2: seq=0 ttl=60 time=3.274 ms
64 bytes from 172.17.16.2: seq=1 ttl=60 time=1.356 ms
^C
[root@docker2 ~]#
?[root@docker3 ~]# docker exec bbox2 ping -c 5 172.17.65.2
PING 172.17.65.2 (172.17.65.2): 56 data bytes
64 bytes from 172.17.65.2: seq=0 ttl=60 time=2.995 ms
64 bytes from 172.17.65.2: seq=1 ttl=60 time=1.396 ms
64 bytes from 172.17.65.2: seq=2 ttl=60 time=1.650 ms
^C
[root@docker3 ~]#分析数据流
从bbox1 ping 172.17.16.2
看看它的默认路由
[root@docker2 ~]# docker exec bbox1 ip r
default via 172.17.65.1 dev eth0
172.17.65.0/24 dev eth0 scope link? src 172.17.65.2
[root@docker2 ~]#目的地址 172.17.16.2不在直连网络，因此数据包从default路由出。default路由的地址时 172.17.65.1，这个地址就是docker0的地址
[root@docker2 ~]# ip a |grep docker0
4: docker0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1450 qdisc noqueue state UP group default
? ? inet 172.17.65.1/24 brd 172.17.65.255 scope global docker0
24: veth63d6978@if23: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1450 qdisc noqueue master docker0 state UP group default
[root@docker2 ~]#数据到达docker0后，发现这个数据包的地址是172.17.16.2，并不是给自己，寻找下一跳
看看node上的路由表
[root@docker2 ~]# ip r
default via 192.168.211.2 dev ens33 proto dhcp metric 100
172.17.0.0/16 dev flannel.1
172.17.65.0/24 dev docker0 proto kernel scope link src 172.17.65.1
172.18.0.0/16 dev docker_gwbridge proto kernel scope link src 172.18.0.1
192.168.211.0/24 dev ens33 proto kernel scope link src 192.168.211.154 metric 100
[root@docker2 ~]#匹配到172.17.0.0/16这条路由，这是直连路由，数据送到flannel.1上
flannel.1收到数据包，自己不是目的地，需要发数据发送出去，数据包沿着网络协议向下流动，在二层封装以太包，填写目的mac地址。
这时发出arp“who is 172.17.16.2"
flannel.1是vxlan设备，vxlan并不会在二层发arp包，而是由linux kernel的 “L3 MISS"事件，将arp发到用户空间和flanneld程序。
linux kernel的 “L3 MISS"事件参数由下面的参数设置
[root@docker2 ~]# cat /proc/sys/net/ipv4/neigh/flannel.1/app_solicit
3
[root@docker2 ~]#
flanneld程序收到“L3 MISS”内核事件以及ARP请求后，并不会向外网发送arp request，而是从etcd查找匹配该地址的子网的vtep信息。
[root@docker2 ~]#? curl -L http://192.168.211.140:2379/v2/keys/atomic.io/network/subnets/172.17.16.0-24
{"action":"get","node":{"key":"/atomic.io/network/subnets/172.17.16.0-24","value":"{\"PublicIP\":\"192.168.211.153\",\"BackendType\":\"vxlan\",\"BackendData\":{\"VtepMAC\":\"d2:72:c5:90:ff:8c\"}}","expiration":"2018-06-20T06:49:24.673562899Z","ttl":83016,"modifiedIndex":98,"createdIndex":98}}
[root@docker2 ~]#flanneld从etcd中找到答案
subnets:172.17.16.0-24
PublicIP:192.168.211.153
VtepMAC:d2:72:c5:90:ff:8cVtepMAC:d2:72:c5:90:ff:8c 这个地址谁呢？
到192.168.211.153也就是这里的docker3检查下
[root@docker3 ~]# ip -d link show
11: flannel.1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1450 qdisc noqueue state UNKNOWN mode DEFAULT group default
? ? link/ether d2:72:c5:90:ff:8c brd ff:ff:ff:ff:ff:ff promiscuity 0
? ? vxlan id 1 local 192.168.211.153 dev ens33 srcport 0 0 dstport 8472 nolearning ageing 300 noudpcsum noudp6zerocsumtx noudp6zerocsumrx?可以看到docker3的flannel.1的mac地址就是
找到目的地后，flanneld将查询到的信息存入arp缓存
[root@docker2 ~]# ip n
192.168.211.254 dev ens33 lladdr 00:50:56:ea:e1:f4 STALE
172.17.16.2 dev flannel.1 lladdr d2:72:c5:90:ff:8c STALE
192.168.211.2 dev ens33 lladdr 00:50:56:fd:b3:89 STALE
192.168.211.153 dev ens33 lladdr 00:0c:29:93:2c:89 STALE
192.168.211.1 dev ens33 lladdr 00:50:56:c0:00:08 DELAY
172.17.65.2 dev docker0 lladdr 02:42:ac:11:41:02 STALE
192.168.211.140 dev ens33 lladdr 00:0c:29:f9:b7:d2 DELAY
[root@docker2 ~]#最后封装vxlan包，发送到目的地
4.
flannel 为每个主机分配了独立的 subnet但 flannel.1 将这些 subnet 连接起来了相互之间可以路由。本质上flannel 将各主机上相互独立的 docker0 容器网络组成了一个互通的大网络实现了容器跨主机通信。flannel 没有提供隔离。
5.
host-gw
flannel支持多种backend,host-gw是flannel的另一种backend.
与vxlan不同,host-gw不会封装数据包.而是在主机路由表中创建到其他主机subnet的路由条目,实现容器跨主机通讯.
设置backend
修改下前面设置的,把backend改成host-gw
[root@docker1 ~]# etcdctl set atomic.io/network/config ‘{"Network":"172.17.0.0/16", "SubnetMin": "172.17.1.0", "SubnetMax": "172.17.254.0", "Backend":{"Type":"host-gw"}}‘
{"Network":"172.17.0.0/16", "SubnetMin": "172.17.1.0", "SubnetMax": "172.17.254.0", "Backend":{"Type":"host-gw"}}
[root@docker1 ~]# etcdctl get atomic.io/network/config
{"Network":"172.17.0.0/16", "SubnetMin": "172.17.1.0", "SubnetMax": "172.17.254.0", "Backend":{"Type":"host-gw"}}
[root@docker1 ~]#在docker2,docker3重新启动flanneld进程.
[root@docker2 ~]# flanneld -etcd-endpoints=http://192.168.211.140:2379 -iface=ens33 -etcd-prefix=/atomic.io/network &检查下路由表
[root@docker2 ~]# ip r
default via 192.168.211.2 dev ens33 proto dhcp metric 100
169.254.0.0/16 dev ens33 scope link metric 1002
172.17.16.0/24 via 192.168.211.153 dev ens33
172.17.65.0/24 dev docker0 proto kernel scope link src 172.17.65.1
172.18.0.0/16 dev docker_gwbridge proto kernel scope link src 172.18.0.1
192.168.211.0/24 dev ens33 proto kernel scope link src 192.168.211.154 metric 100
[root@docker2 ~]#
[root@docker3 ~]# ip r
default via 192.168.211.2 dev ens33 proto dhcp metric 100
169.254.0.0/16 dev ens33 scope link metric 1002
172.17.16.0/24 dev docker0 proto kernel scope link src 172.17.16.1
172.17.65.0/24 via 192.168.211.154 dev ens33
172.18.0.0/16 dev docker_gwbridge proto kernel scope link src 172.18.0.1
192.168.211.0/24 dev ens33 proto kernel scope link src 192.168.211.153 metric 100
[root@docker3 ~]#
172.17.16.0/24 via 192.168.211.153 dev ens33 ?docker2
172.17.65.0/24 via 192.168.211.154 dev ens33 ?docker3出现了相对应的路由条目
需要修改mtu并且重启docker
mtu值前面已经有过说明，根据下面的值来修改
[root@docker3 ~]# cat /run/flannel/subnet.env
FLANNEL_NETWORK=172.17.0.0/16
FLANNEL_SUBNET=172.17.16.1/24
FLANNEL_MTU=1500
FLANNEL_IPMASQ=false
[root@docker3 ~]#
[root@docker3 ~]# sed -i ‘s/1450/1500/g‘? /etc/systemd/system/docker.service重启docker
[root@docker3 ~]# systemctl daemon-reload
[root@docker3 ~]# systemctl restart docker
[root@docker3 ~]#通过容器数据走向分析下
[root@docker2 ~]# docker exec bbox1 ping 172.17.16.2
PING 172.17.16.2 (172.17.16.2): 56 data bytes
64 bytes from 172.17.16.2: seq=0 ttl=62 time=1.851 ms
64 bytes from 172.17.16.2: seq=1 ttl=62 time=0.946 ms
64 bytes from 172.17.16.2: seq=2 ttl=62 time=0.972 ms
^C
[root@docker2 ~]# docker exec bbox1 ip? r
default via 172.17.65.1 dev eth0
172.17.65.0/24 dev eth0 scope link? src 172.17.65.2
[root@docker2 ~]#走默认路由172.17.65.1
[root@docker2 ~]# ip a |grep docker0
4: docker0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default
? ? inet 172.17.65.1/24 brd 172.17.65.255 scope global docker0
7: vetha9f972a@if6: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue master docker0 state UP group default
[root@docker2 ~]#数据到达docker0
[root@docker2 ~]# ip r
default via 192.168.211.2 dev ens33 proto dhcp metric 100
169.254.0.0/16 dev ens33 scope link metric 1002
172.17.16.0/24 via 192.168.211.153 dev ens33
172.17.65.0/24 dev docker0 proto kernel scope link src 172.17.65.1
172.18.0.0/16 dev docker_gwbridge proto kernel scope link src 172.18.0.1
192.168.211.0/24 dev ens33 proto kernel scope link src 192.168.211.154 metric 100
[root@docker2 ~]#匹配到172.17.16.0/24 via 192.168.211.153 dev ens33
直接发送数据过去.
6.
vxlan和host-gw的简单比较
host-gw 把每个主机配置成网关,主机知道其他主机的subnet和转发地址.
vxlan是在主机间建立隧道.
不同的主机在一个大的网内.
vxlan需要对数据进行打包拆包,性能低于host-gw
标签：docker1,flanneld,network,etcd,172.17,docker,root,路由,flannel 来源： https://www.cnblogs.com/wangjq19920210/p/12542578.html
本站声明： 1. iCode9 技术分享网（下文简称本站）提供的所有内容，仅供技术学习、探讨和分享； 2. 关于本站的所有留言、评论、转载及引用，纯属内容发起人的个人观点，与本站观点和立场无关； 3. 关于本站的所有言论和文字，纯属内容发起人的个人观点，与本站观点和立场无关； 4. 本站文章均是网友提供，不完全保证技术分享内容的完整性、准确性、时效性、风险性和版权归属；如您发现该文章侵犯了您的权益，可联系我们第一时间进行删除； 5. 本站为非盈利性的个人网站，所有内容不会用来进行牟利，也不会利用任何形式的广告来间接获益，纯粹是为了广大技术爱好者提供技术内容和技术思想的分享性交流网站。