标签:总结 power drop Rd source detected sink type 连接
First of all, Let`s see a picture about sourcesink connection.
This picture is copyed from another bloger, and this is the link:https://blog.csdn.net/a6588621/article/details/85049539
In this picture, we can see two module the source and the sink.
Do you remember what I said before that host has a pulled-up resistance and device has a drop-down resistance.
So that you can obviously choose source as host and sink as device.
OK, next I will tell you about how they connect.
Step1 : cc1 and cc2 at the source end are all pulled up to hight level(5V), and the sink insertion is detected at the same time.When Rd drop-down resistence is detected. the sink is detected, The resistence of Rp indicates the level of power that host can provided.
Step2: The Source side reverses the USB data link based on which CC pin in the Cable is Rd drop-down, and decides that the other CC pin is VCONN
Step3: after that, source start to provide power in VBUS and VCONN
Step4: Souce can adjust the tolerence of Rp dynamically to represent the change of sending current to sink and inform the maximum usable current.
Step5: Source will detect the presence of Rd continuously and once the connection is cut off , the power will be turned off
Step6: The cc pins can be used for communication if source supports advanced function (PD or Alternate Mode)
标签:总结,power,drop,Rd,source,detected,sink,type,连接 来源: https://blog.csdn.net/demonDHXQ/article/details/100136462
本站声明: 1. iCode9 技术分享网(下文简称本站)提供的所有内容,仅供技术学习、探讨和分享; 2. 关于本站的所有留言、评论、转载及引用,纯属内容发起人的个人观点,与本站观点和立场无关; 3. 关于本站的所有言论和文字,纯属内容发起人的个人观点,与本站观点和立场无关; 4. 本站文章均是网友提供,不完全保证技术分享内容的完整性、准确性、时效性、风险性和版权归属;如您发现该文章侵犯了您的权益,可联系我们第一时间进行删除; 5. 本站为非盈利性的个人网站,所有内容不会用来进行牟利,也不会利用任何形式的广告来间接获益,纯粹是为了广大技术爱好者提供技术内容和技术思想的分享性交流网站。