标签：flight Assignment CSCI3120 will plane your must
CSCI3120
Assignment 2
Due: 11:59 AM, Tuesday, June 18, 2019
Introduction
As we discussed in class, process become blocked whenever they are waiting for a resource
or for an operation to complete. In air-travel a similar situation occurs when a plane for a
particular flight is delayed (or is not available). This is a primary cause of increasing delays
as the day progresses.
The purpose of this assignment is
1. Reinforce the idea of blocking and its effect on scheduling.
2. To implement blocking mechanisms similar to ones in an operating system.
3. To further improve your programming skills.
In this assignment you will extend the air transportation simulator by adding the ability to
block flights when the plane required for the flight is not available.
System Requirements
This assignment is intended to be done and executed in a Unix environment. You can use
the csci3120.cs.dal.ca Unix server, a Mac (in Terminal), or your own Unix-based system,
such as Linux, OpenBSD, FreeBSD, etc. This may also work in the Cygwin environment
under Windows. Note: Your code will be tested on csci3120.cs.dal.ca.
Background
This assignment assumes all the background described in Assignment 1.
Flights require an important piece of equipment to proceed: a plane. At the start of the
day, a plane is assigned to the first flights. When a flight arrives at an airport, the plane is
cleaned up (“groomed”) and then used for another flight departing from the same airport.
When that flight ends, the plane is again groomed and assigned to another flight departing
CSCI3120作业代做、代写Java程序语言作业
from its new location. The plane identifier (PID) is used to uniquely identify each plane and
is part of the flight information.
Naturally, if a plane is delayed or breaks down, flights that rely on it may be delayed
(or canceled) as well. It is a common (unpleasant) experience to be waiting at the gate and
being told that the plane has not yet arrived.
Once a plane arrives, it takes at least 30 minutes to groom the plane in preparation for
departure. Once the plane is groomed, the flight that will use it can depart on or after its
1
CSCI3120 Summer 2019 Assignment 2
scheduled departure time. Thus, an additional 30 minutes must be allowed between when a
plane arrives and departs. Note: The first time a plane is used, it is already groomed and
can depart at the flight’s appointed time.
Your task will be to implement this aspect of scheduling in the air traffic
simulator called atsim. You can either extend your own version, which you submitted for
Assignment 1, or the provided Assignment 1 solution.
Simulator Input
The input is the same as Assignment 1. Please see examples as shown in the provided test
suite (tests_2.zip).
Processing and Semantics
All processing rules described in Assignment 1 apply, in addition to the following:
Each plane is identified by a plane ID that is in the range 0 . . . 999.
The plane used by a flight must be at the same airport as the origin of the flight.
Each plane is initially at the same airport as the first flight that will use it. E.g., If
the first flight to use plane 42 originates in YHZ, then initially plane 42 is at YHZ.
If a plane is being use by a flight, no other flight can use it until the flight completes
and the plane is groomed.
After a flight completes (arrives at the gate), the plane associated with the flight
takes 30 minutes to groom. I.e., there is a 30 minute interval between the arrival and
departure of the same plane.
Once a plane is groomed, the flight to use the plane may depart from the gate immediately.
If no flight needs to use the plane immediately, the plane remains at the airport
until it is used.
Reminder: The simulation completes once all the flights have completed or the day
has ended.
Expected Output
The output is the same as Assignment 1. Please see examples as shown in the provided test
suite (tests_2.zip).
Nonfunctional Requirements
Same nonfunctional requirements as Assignment 1. Note: the starting code found in the zip
file assn2.zip, on Brightspace, is a solution to Assignment 1 and a possible starting point
for Assignment 2.
2
CSCI3120 Summer 2019 Assignment 2
Test Your Code!
To test your code, a test suite (tests_2.zip is provided. Same test procedures as those in
Assignment 1 are recommended.
Hints and Suggestions
1. Each airport will need a list to keep track of all blocked flights that are waiting for
their plane.
2. Either a global or per-airport table of planes and their status will be useful.
3. The sample solution to Assignment 2 only required modifying the airport.c file and
required 55 lines of additional code.
The Java Option
Same conditions apply as in Assignment 1. A penalty of 10% will be applied if the assignment
is done in Java instead of C. The amount of code needed for the Java version is under 50
lines of code because the JDK already has a List implementation, ready to go.
What to Hand In
You need only submit an electronic of your assignment. Submission must be done by 11:59
AM of the due date. Submission is done via Brightspace.
The assignment submission should be a single zip file (.zip) comprising the source code
files that implement the simulator as well as the makefile and the runme.sh file.
Programming Guidelines
1. The program must read the input from the console (stdin) and must print out the
results to the console (stdout) unless otherwise specified. Do not print out any output
or request any input other than what is specified by the assignment.
2. Use the file and function names specified in the assignment.
3. Your programs will be compiled and tested on the csci3120.cs.dal.ca Unix server.
In order to receive credit, your programs must compile and run on this server.
4. Your program must compile. Programs that do not compile will receive a 0.
5. The programs must be well commented, properly indented, and clearly written. Please
see the style guidelines under Assignments or Resources on the course website.
3
CSCI3120 Summer 2019 Assignment 2
Grading Scheme
The assignment will be graded based on three criteria:
Functionality “Does it work according to specifications?”. This is determined in an automated
fashion by running your program on a number of inputs and ensuring that the
outputs match the expected outputs. The score is determined based on the number
of tests that your program passes. So, if your program passes t
T
tests, you will receive
that proportion of the marks.
Quality of Solution “Is it a good solution?” This considers whether the solution is correct,
efficient, covers boundary conditions, does not have any obvious bugs, etc. This is
determined by visual inspection of the code. Initially full marks are given to each
solution and marks are deducted based on faults found in the solution.
Code Clarity “Is it well written?” This considers whether the solution is properly formatted,
well documented, and follows coding style guidelines.
If your program does not compile, it is considered non-functional and of extremely poor
quality, meaning you will receive 0 for the solution.
Mark
Code Quality (Simulator) /20
Functionality (automated tests) /20
Code Clarity /10
Total /100
因为专业，所以值得信赖。如有需要，请加QQ：99515681 或邮箱：99515681@qq.com
微信：codehelp
标签：flight,Assignment,CSCI3120,will,plane,your,must 来源： https://www.cnblogs.com/linta/p/11085001.html
本站声明： 1. iCode9 技术分享网（下文简称本站）提供的所有内容，仅供技术学习、探讨和分享； 2. 关于本站的所有留言、评论、转载及引用，纯属内容发起人的个人观点，与本站观点和立场无关； 3. 关于本站的所有言论和文字，纯属内容发起人的个人观点，与本站观点和立场无关； 4. 本站文章均是网友提供，不完全保证技术分享内容的完整性、准确性、时效性、风险性和版权归属；如您发现该文章侵犯了您的权益，可联系我们第一时间进行删除； 5. 本站为非盈利性的个人网站，所有内容不会用来进行牟利，也不会利用任何形式的广告来间接获益，纯粹是为了广大技术爱好者提供技术内容和技术思想的分享性交流网站。