标签：Rover Land repair please CG100 airbag

2014 Land Rover Aurora with airbag NO. DK62-14D374-AG, use CG100 PROG III to repair the airbag without any problem.

Car type: 2014 Land Rover Aurora
Airbag No: DK62-14D374-AG

CG100 Pro III repair airbag on Land Rover Aurora 2014:

1.Check the vehicle.


2.The airbag lights on all the time.

3.Access professional decoder detection and clear the DTC.

4.Disassemble the car, find the airbag computer board, confirm the chip.

5.Open the software, enter the corresponding operation interface, find the physical wiring diagram.

6.Perform physical wiring in a no-current environment and confirm that it is correct before

powering on. After reading the data, please save the original data! If the software supports

automatic repair, please repair it at the prompt of the software; if the software does not support

repair temporarily, please select the custom operation the first time consult the manufacturer’s

technical staff ( E-Mail: Sales@obd2tool.com).

(Note: Please do not touch any cable when it is reading.)

7.After the repair succeed, please put the airbag computer board back to the car. Connect Land Rover special inspection SDD detection, it did not show any DTC.

8.The airbag light is off.

9.The airbag repaired successfully by CG100 Programmer.

标签：Rover,Land,repair,please,CG100,airbag
来源： https://www.cnblogs.com/obd2tool/p/11030246.html

本站声明： 1. iCode9 技术分享网（下文简称本站）提供的所有内容，仅供技术学习、探讨和分享；
2. 关于本站的所有留言、评论、转载及引用，纯属内容发起人的个人观点，与本站观点和立场无关；
3. 关于本站的所有言论和文字，纯属内容发起人的个人观点，与本站观点和立场无关；
4. 本站文章均是网友提供，不完全保证技术分享内容的完整性、准确性、时效性、风险性和版权归属；如您发现该文章侵犯了您的权益，可联系我们第一时间进行删除；
5. 本站为非盈利性的个人网站，所有内容不会用来进行牟利，也不会利用任何形式的广告来间接获益，纯粹是为了广大技术爱好者提供技术内容和技术思想的分享性交流网站。