标签：lb isp Single 192.168 UP VIP add Done ans
ans Single VIP LLB and SLB config
# 配置设备工作模式和开启的功能 > enable ans mode FR MBF Edge USNIP L3 PMTUD Done > enable ans feature WL LB CS SSL IPv6PT CH Done > # 设置设备的管理IP ( 需要重启系统才可生效, 重启系统前请先保存配置. save ansconfig ) > set ans config -IPAddress 192.168.11.11 -netmask 255.255.255.0 Done > # 设置用于连通内网的SNIP地址 ( enable ans mode usnip ) > add ans ip 192.168.11.1 255.255.255.0 -mgmtAccess ENABLED -restrictAccess ENABLED Done > # 设置设备主机名 > set ans hostName SURFILTER Done > # 设置时区 > set ans param -cookieversion 1 -timezone "GMT+08:00-CST-Asia/Shanghai" Done > # 设置时间, 格式为: YYYYmmddHHMM 注意时区是否正确 > shell date 201903181424 Mon Dec 10 17:45:00 CST 2018 Done > shell date +'%Y-%m-%d %H:%M:%S' 2019-03-18 14:24:09 Done > # 添加NTP服务器 ( 非常规操作方式, 直接修改NTP配置文件 ) > shell vi /etc/ntp.conf # Common elements of NTP configuration # # Do not edit: changes will be lost following reboot. # For site-specific NTP configuration, see the instructions in /etc/ntp.conf # # We won't allow *anything* from hosts not listed in the configuration # This means you need a restrict line for each server restrict default ignore restrict -6 default ignore # Allow just about anything from localhost, IPv4. restrict 127.0.0.1 mask 255.255.255.255 driftfile /var/db/ntp.drift logfile /var/log/ntpd.log # Log everything, even from ntpd (which otherwise defaults to "all =sync") logconfig =all +all ####################### server 218.75.4.130 minpoll 6 maxpoll 10 restrict 218.75.4.130 nomodify notrap nopeer noquery ~ ~ ~ :wq Done > # 启动NTP服务器 > enable ntp sync Done > # 添加用于连通ISP的VIP地址 > add ans ip 192.168.110.41 255.255.255.0 -type VIP Done > add ans ip 192.168.120.45 255.255.255.0 -type VIP Done > # 添加 VLAN > add vlan 11 Done > add vlan 21 Done > bind vlan 11 -ifnum 1/6 Done > bind vlan 11 -IPAddress 192.168.110.41 255.255.255.0 Done > bind vlan 21 -ifnum 1/7 Done > bind vlan 21 -IPAddress 192.168.120.45 255.255.255.0 Done > # 设置针对内网的反向NAT > set rnat 192.168.11.0 255.255.255.0 -natIP 192.168.110.41 Done > set rnat 192.168.11.0 255.255.255.0 -natIP 192.168.120.45 Done > # 添加 NetProfile , 绑定 SNIP > add netProfile net_pf_internal -srcIP 192.168.11.1 Done > # 添加ISP网关服务器地址 > add server srv_isp_ct 192.168.110.1 Done > add server srv_isp_cnc 192.168.210.1 Done > # 添加ISP监视器 > add lb monitor mon_ping_net_pf PING -LRTM DISABLED -netProfile net_pf_internal Done > # 添加ISP服务并绑定对应监视器 > add service svc_isp_ct srv_isp_ct ANY * Done > bind service svc_isp_ct -monitorName mon_ping_net_pf Done > > add service svc_isp_cnc srv_isp_cnc ANY * Done > bind service svc_isp_cnc -monitorName mon_ping_net_pf Done > # 添加ISP负载均衡虚拟服务器并绑定对应服务 > add lb vserver lb_vsrv_isp_llb_all ANY 0.0.0.0 0 -lbMethod ROUNDROBIN -persistenceType DESTIP Done > bind lb vserver lb_vsrv_isp_llb_all svc_isp_ct Done > bind lb vserver lb_vsrv_isp_llb_all svc_isp_cnc Done > > add lb vserver lb_vsrv_isp_llb_ct ANY 0.0.0.0 0 -lbMethod ROUNDROBIN -persistenceType DESTIP Done > bind lb vserver lb_vsrv_isp_llb_ct svc_isp_ct Done > set lb vserver lb_vsrv_isp_llb_ct -backupVServer lb_vsrv_isp_llb_all Done > > add lb vserver lb_vsrv_isp_llb_cnc ANY 0.0.0.0 0 -lbMethod ROUNDROBIN -persistenceType DESTIP Done > bind lb vserver lb_vsrv_isp_llb_cnc svc_isp_cnc Done > set lb vserver lb_vsrv_isp_llb_cnc -backupVServer lb_vsrv_isp_llb_all Done > # 添加默认的LB路由项 > add lb route 0.0.0.0 0.0.0.0 lb_vsrv_isp_llb_all Done > # 添加并应用 PBR > add ans pbr pbr_isp_ct_internel ALLOW -srcIP = 192.168.11.1 -destIP = 192.168.110.1 -nextHop 127.0.0.1 -priority 1101 -msr ENABLED Done > add ans pbr pbr_isp_cnc_internel ALLOW -srcIP = 192.168.11.1 -destIP = 192.168.120.1 -nextHop 127.0.0.1 -priority 1102 -msr ENABLED Done > apply ns pbrs Done > # 发布本地ssh服务 > add server srv_local_loopback 127.0.0.1 Done > add service svc_local_ssh srv_local_loopback TCP 22 Done > > add lb vserver lb_vsrv_isp_ct_ssh TCP 192.168.110.41 22 -lbMethod ROUNDROBIN -persistenceType SOURCEIP Done > bind lb vserver lb_vsrv_isp_ct_ssh svc_local_ssh Done > add lb vserver lb_vsrv_isp_cnc_ssh TCP 192.168.120.45 22 -lbMethod ROUNDROBIN -persistenceType SOURCEIP Done > bind lb vserver lb_vsrv_isp_cnc_ssh svc_local_ssh Done > # 发布本地webgui服务 > add server srv_local_loopback 127.0.0.1 Done > add service svc_local_webgui srv_local_loopback HTTP 80 Done > > add lb vserver lb_vsrv_isp_ct_webgui HTTP 192.168.110.41 8088 -lbMethod ROUNDROBIN -persistenceType COOKIEINSERT Done > bind lb vserver lb_vsrv_isp_ct_webgui svc_local_webgui Done > add lb vserver lb_vsrv_isp_cnc_webgui HTTP 192.168.120.45 8088 -lbMethod ROUNDROBIN -persistenceType COOKIEINSERT Done > bind lb vserver lb_vsrv_isp_cnc_webgui svc_local_webgui Done > # 发布内网web服务 > add server srv_web_hfs 192.168.11.249 Done > add service svc_web_hfs srv_web_hfs HTTP 80 Done > > add lb vserver lb_vsrv_web_hfs_ct HTTP 192.168.110.41 80 -lbmethod ROUNDROBIN -persistenceType COOKIEINSERT Done > bind lb vserver lb_vsrv_web_hfs_ct svc_web_hfs Done > add lb vserver lb_vsrv_web_hfs_cnc HTTP 192.168.120.45 80 -lbmethod ROUNDROBIN -persistenceType COOKIEINSERT Done > bind lb vserver lb_vsrv_web_hfs_cnc svc_web_hfs Done >
> show ip
Ipaddress TD Type Mode Arp Icmp Vserver State
--------- -- ---- ---- --- ---- ------- ------
1) 192.168.11.11 0 HGANS IP Active Enabled Enabled NA Enabled
2) 192.168.11.1 0 SNIP Active Enabled Enabled NA Enabled
3) 192.168.110.41 0 VIP Active Enabled Enabled Enabled Enabled
4) 192.168.120.45 0 VIP Active Enabled Enabled Enabled Enabled
Done
>
> show route
Network Netmask Gateway/OwnedIP State TD Type
------- ------- --------------- ----- -- ----
1) 0.0.0.0 0.0.0.0 lb_vsrv_isp_llb_ UP 0 |LBROUTE
all
2) 127.0.0.0 255.0.0.0 127.0.0.1 UP 0 PERMANENT
3) 192.168.11.0 255.255.255.0 192.168.11.11 UP 0 DIRECT
4) 192.168.110.0 255.255.255.0 192.168.110.41 UP 0 DIRECT
5) 192.168.120.0 255.255.255.0 192.168.120.45 UP 0 DIRECT
Done
>
> show rnat
1) Network: 192.168.11.0 Netmask: 255.255.255.0
NatIP: 192.168.110.41 Td: 0
2) Network: 192.168.11.0 Netmask: 255.255.255.0
NatIP: 192.168.120.45 Td: 0
Done
>
> show ans pbr
1) Name: pbr_isp_ct_internel
Action: ALLOW Hits: 686
srcIP = 192.168.11.1
destIP = 192.168.110.1
srcMac: Protocol:
Vlan: Interface:
Active Status: ENABLED Applied Status: APPLIED
Priority: 1101
NextHop: 127.0.0.1
MSR: ENABLED STATE: UP
2) Name: pbr_isp_cnc_internel
Action: ALLOW Hits: 676
srcIP = 192.168.11.1
destIP = 192.168.120.1
srcMac: Protocol:
Vlan: Interface:
Active Status: ENABLED Applied Status: APPLIED
Priority: 1102
NextHop: 127.0.0.1
MSR: ENABLED STATE: UP
Done
>
> show server
1) Name: srv_isp_ct State:ENABLED
IPAddress: 192.168.110.1
2) Name: srv_isp_cnc State:ENABLED
IPAddress: 192.168.120.1
3) Name: srv_local_loopback State:ENABLED
IPAddress: 127.0.0.1
4) Name: srv_web_hfs State:ENABLED
IPAddress: 192.168.11.249
Done
>
> show service -summary
---------------------------------------------------------------------------------------------
Name State IP Addr Port Protocol MaxClients MaxReqs
---------------------------------------------------------------------------------------------
1 svc_isp_ct UP srv_isp_ct * ANY 0 0
2 svc_isp_cnc UP srv_isp_cnc * ANY 0 0
3 svc_..._ssh UP srv_loc...oopback 22 TCP 256 0
4 svc_...bgui UP srv_loc...oopback 80 HTTP 0 0
5 svc_web_hfs UP srv_web_hfs 80 HTTP 0 0
Done
>
> show lb vserver -summary
--------------------------------------------------------------------------------------------------------------------------------------
Name State Effec State Td IP Addr Port Prot Method TCPProfName HTTPProfName NetProfName DBProfName
--------------------------------------------------------------------------------------------------------------------------------------
1 lb_..._all UP UP 0 0.0.0.0 0 ANY RO...IN
2 lb_...b_ct UP UP 0 0.0.0.0 0 ANY RO...IN
3 lb_..._cnc UP UP 0 0.0.0.0 0 ANY RO...IN
4 lb_..._ssh UP UP 0 192.168.110.41 22 TCP RO...IN
5 lb_..._ssh UP UP 0 192.168.120.45 22 TCP RO...IN
6 lb_...bgui UP UP 0 192.168.110.41 8088 HTTP RO...IN
7 lb_...bgui UP UP 0 192.168.120.45 8088 HTTP RO...IN
8 lb_...s_ct UP UP 0 192.168.110.41 80 HTTP LE...ON
9 lb_..._cnc UP UP 0 192.168.120.45 80 HTTP LE...ON
Done
>
============= End
标签：lb,isp,Single,192.168,UP,VIP,add,Done,ans 来源： https://www.cnblogs.com/lsgxeva/p/10552453.html
本站声明： 1. iCode9 技术分享网（下文简称本站）提供的所有内容，仅供技术学习、探讨和分享； 2. 关于本站的所有留言、评论、转载及引用，纯属内容发起人的个人观点，与本站观点和立场无关； 3. 关于本站的所有言论和文字，纯属内容发起人的个人观点，与本站观点和立场无关； 4. 本站文章均是网友提供，不完全保证技术分享内容的完整性、准确性、时效性、风险性和版权归属；如您发现该文章侵犯了您的权益，可联系我们第一时间进行删除； 5. 本站为非盈利性的个人网站，所有内容不会用来进行牟利，也不会利用任何形式的广告来间接获益，纯粹是为了广大技术爱好者提供技术内容和技术思想的分享性交流网站。