标签：sending 滚动 Ctrl feature terminal XON XOFF data

特性为Software Flow Control (XON/XOFF flow control)

当要给数据连接终端无法接受更多数据时，会发送XOFF来暂停，发送XON来继续接收。

C-s会使terminal滚动暂停。

C-q会解除锁定

关闭这个feature可以使用stty -ixon命令。可以将其写入.bashrc

原文：

This feature is called Software Flow Control (XON/XOFF flow control)

When one end of the data link (in this case the terminal emulator) can't receive any more data (because the buffer is full or nearing full or the user sends C-s) it will send an "XOFF" to tell the sending end of the data link to pause until the "XON" signal is received.

What is happening under the hood is the "XOFF" is telling the TTY driver in the kernel to put the process that is sending data into a sleep state (like pausing a movie) until the TTY driver is sent an "XON" to tell the kernel to resume the process as if it were never stopped in the first place.

C-s enables terminal scroll lock. Which prevents your terminal from scrolling (By sending an "XOFF" signal to pause the output of the software).

C-q disables the scroll lock. Resuming terminal scrolling (By sending an "XON" signal to resume the output of the software).

This feature is legacy (back when terminals were very slow and did not allow scrolling) and is enabled by default.

To disable this feature you need the following in either ~/.bash_profile or ~/.bashrc:

stty -ixon

参考：https://unix.stackexchange.com/questions/72086/ctrl-s-hangs-the-terminal-emulator

标签：sending,滚动,Ctrl,feature,terminal,XON,XOFF,data
来源： https://www.cnblogs.com/zl1991/p/16476845.html

本站声明： 1. iCode9 技术分享网（下文简称本站）提供的所有内容，仅供技术学习、探讨和分享；
2. 关于本站的所有留言、评论、转载及引用，纯属内容发起人的个人观点，与本站观点和立场无关；
3. 关于本站的所有言论和文字，纯属内容发起人的个人观点，与本站观点和立场无关；
4. 本站文章均是网友提供，不完全保证技术分享内容的完整性、准确性、时效性、风险性和版权归属；如您发现该文章侵犯了您的权益，可联系我们第一时间进行删除；
5. 本站为非盈利性的个人网站，所有内容不会用来进行牟利，也不会利用任何形式的广告来间接获益，纯粹是为了广大技术爱好者提供技术内容和技术思想的分享性交流网站。