ICode9

精准搜索请尝试: 精确搜索
首页 > 其他分享> 文章详细

Harbor-私有镜像仓库的安装部署

2022-07-09 23:36:38  阅读:165  来源: 互联网

标签:https Harbor 离线 harbor proxy 私有 安装程序 镜像


Harbor 安装条件

官网给出了安装需要的最低硬件和软件的条件:https://goharbor.io/docs/2.0.0/install-config/installation-prereqs/

最低硬件要求:

资源 最低限度 推荐的
CPU 2核 4 核
内存 4GB 8 GB
磁盘 40 GB 160 GB

最低软件要求:

软件 版本 描述
Docker engine 版本 17.06.0-ce+ 或更高版本 有关安装说明,请参阅 Docker 引擎文档
Docker Compose 版本 1.18.0 或更高版本 有关安装说明,请参阅 Docker Compose 文档
OpenSSL 最新的优先 用于为 Harbor 生成证书和密钥

Harbor 要求在目标主机上打开以下端口:

端口号 协议 描述
443 HTTPS Harbor 门户和核心 API 接受此端口上的 HTTPS 请求。您可以在配置文件中更改此端口。
4443 HTTPS 与 Harbor 的 Docker 内容信任服务的连接。仅在启用 Notary 时才需要。您可以在配置文件中更改此端口。
80 HTTP Harbor 门户和核心 API 接受此端口上的 HTTP 请求。您可以在配置文件中更改此端口。

在线安装和离线安装

可以从 官方发布页面下载 Harbor 安装程序。下载在线安装程序或离线安装程序。

  • 在线安装程序:在线安装程序从 Docker 中心下载 Harbor 镜像。因此,安装程序的尺寸非常小。
  • 离线安装程序:如果要部署 Harbor 的主机没有连接到 Internet,请使用离线安装程序。离线安装程序包含预先构建的映像,因此它比在线安装程序大

在线和离线安装程序的安装过程几乎相同。

这里我主要使用离线安装,因为在线安装因为墙、内部网络等原因,有的同学会下载很慢,而离线安装包都包含了预先构建的镜像,所以直接现在离线安装包最好!

离线安装

官方发布 页面下载离线安装包:

image-20220321223547469

下载后将压缩包上传到服务器使用命令tar -zxf harbor-offline-installer-v2.4.2.tgz解压,解压后如下图:

image-20220322223019699

解压后在当前的解压路径可以得到文件夹harborcd harbor 进文件夹:

image-20220322223137274

可以看到文件夹有一堆文件,其中最主要的是 harbor.yml.tmplinstall.sh ,他们分别是配置文件和安装执行文件。

# 复制并重命名一份新的配置文件
cp harbor.yml.tmpl harbor.yml
# 使用 vim 编辑配置文件,如果提示找不到vim ,使用以下命令安装 vim
# ubuntu 使用 sudo apt-get install vim 
# redHat/Fedora/CentOS 使用 yum install vim 
vim harbor.yml  # 或者使用 vi harbor.yml 编辑

打开harbor.yml,最主要是更改一下几点,其他的保持默认即可:

harbor.yml示例模板:

# Configuration file of Harbor

# The IP address or hostname to access admin UI and registry service.
# DO NOT use localhost or 127.0.0.1, because Harbor needs to be accessed by external clients.
hostname: 192.168.0.2

# http related config
http:
  # port for http, default is 80. If https enabled, this port will redirect to https port
  port: 8088

# 不使用HTTPS 
# https related config
# https:
  # https port for harbor, default is 443
  # port: 443
  # The path of cert and key files for nginx
  # certificate: /your/certificate/path
  # private_key: /your/private/key/path

# # Uncomment following will enable tls communication between all harbor components
# internal_tls:
#   # set enabled to true means internal tls is enabled
#   enabled: true
#   # put your cert and key files on dir
#   dir: /etc/harbor/tls/internal

# Uncomment external_url if you want to enable external proxy
# And when it enabled the hostname will no longer used
# external_url: https://reg.mydomain.com:8433

# The initial password of Harbor admin
# It only works in first time to install harbor
# Remember Change the admin password from UI after launching Harbor.
harbor_admin_password: Harbor12345

# Harbor DB configuration
database:
  # The password for the root user of Harbor DB. Change this before any production use.
  password: root123
  # The maximum number of connections in the idle connection pool. If it <=0, no idle connections are retained.
  max_idle_conns: 100
  # The maximum number of open connections to the database. If it <= 0, then there is no limit on the number of open connections.
  # Note: the default number of connections is 1024 for postgres of harbor.
  max_open_conns: 900

# The default data volume
data_volume: /mnt/harbor/data

# Harbor Storage settings by default is using /data dir on local filesystem
# Uncomment storage_service setting If you want to using external storage
# storage_service:
#   # ca_bundle is the path to the custom root ca certificate, which will be injected into the truststore
#   # of registry's and chart repository's containers.  This is usually needed when the user hosts a internal storage with self signed certificate.
#   ca_bundle:

#   # storage backend, default is filesystem, options include filesystem, azure, gcs, s3, swift and oss
#   # for more info about this configuration please refer https://docs.docker.com/registry/configuration/
#   filesystem:
#     maxthreads: 100
#   # set disable to true when you want to disable registry redirect
#   redirect:
#     disabled: false

# Trivy configuration
#
# Trivy DB contains vulnerability information from NVD, Red Hat, and many other upstream vulnerability databases.
# It is downloaded by Trivy from the GitHub release page https://github.com/aquasecurity/trivy-db/releases and cached
# in the local file system. In addition, the database contains the update timestamp so Trivy can detect whether it
# should download a newer version from the Internet or use the cached one. Currently, the database is updated every
# 12 hours and published as a new release to GitHub.
trivy:
  # ignoreUnfixed The flag to display only fixed vulnerabilities
  ignore_unfixed: false
  # skipUpdate The flag to enable or disable Trivy DB downloads from GitHub
  #
  # You might want to enable this flag in test or CI/CD environments to avoid GitHub rate limiting issues.
  # If the flag is enabled you have to download the `trivy-offline.tar.gz` archive manually, extract `trivy.db` and
  # `metadata.json` files and mount them in the `/home/scanner/.cache/trivy/db` path.
  skip_update: false
  #
  # The offline_scan option prevents Trivy from sending API requests to identify dependencies.
  # Scanning JAR files and pom.xml may require Internet access for better detection, but this option tries to avoid it.
  # For example, the offline mode will not try to resolve transitive dependencies in pom.xml when the dependency doesn't
  # exist in the local repositories. It means a number of detected vulnerabilities might be fewer in offline mode.
  # It would work if all the dependencies are in local.
  # This option doesn’t affect DB download. You need to specify "skip-update" as well as "offline-scan" in an air-gapped environment.
  offline_scan: false
  #
  # insecure The flag to skip verifying registry certificate
  insecure: false
  # github_token The GitHub access token to download Trivy DB
  #
  # Anonymous downloads from GitHub are subject to the limit of 60 requests per hour. Normally such rate limit is enough
  # for production operations. If, for any reason, it's not enough, you could increase the rate limit to 5000
  # requests per hour by specifying the GitHub access token. For more details on GitHub rate limiting please consult
  # https://developer.github.com/v3/#rate-limiting
  #
  # You can create a GitHub token by following the instructions in
  # https://help.github.com/en/github/authenticating-to-github/creating-a-personal-access-token-for-the-command-line
  #
  # github_token: xxx

jobservice:
  # Maximum number of job workers in job service
  max_job_workers: 10

notification:
  # Maximum retry count for webhook job
  webhook_job_max_retry: 10

chart:
  # Change the value of absolute_url to enabled can enable absolute url in chart
  absolute_url: disabled

# Log configurations
log:
  # options are debug, info, warning, error, fatal
  level: info
  # configs for logs in local storage
  local:
    # Log files are rotated log_rotate_count times before being removed. If count is 0, old versions are removed rather than rotated.
    rotate_count: 50
    # Log files are rotated only if they grow bigger than log_rotate_size bytes. If size is followed by k, the size is assumed to be in kilobytes.
    # If the M is used, the size is in megabytes, and if G is used, the size is in gigabytes. So size 100, size 100k, size 100M and size 100G
    # are all valid.
    rotate_size: 200M
    # The directory on your host that store log
    location: /var/log/harbor

  # Uncomment following lines to enable external syslog endpoint.
  # external_endpoint:
  #   # protocol used to transmit log to external endpoint, options is tcp or udp
  #   protocol: tcp
  #   # The host of external endpoint
  #   host: localhost
  #   # Port of external endpoint
  #   port: 5140

#This attribute is for migrator to detect the version of the .cfg file, DO NOT MODIFY!
_version: 2.5.0

# Uncomment external_database if using external database.
# external_database:
#   harbor:
#     host: harbor_db_host
#     port: harbor_db_port
#     db_name: harbor_db_name
#     username: harbor_db_username
#     password: harbor_db_password
#     ssl_mode: disable
#     max_idle_conns: 2
#     max_open_conns: 0
#   notary_signer:
#     host: notary_signer_db_host
#     port: notary_signer_db_port
#     db_name: notary_signer_db_name
#     username: notary_signer_db_username
#     password: notary_signer_db_password
#     ssl_mode: disable
#   notary_server:
#     host: notary_server_db_host
#     port: notary_server_db_port
#     db_name: notary_server_db_name
#     username: notary_server_db_username
#     password: notary_server_db_password
#     ssl_mode: disable

# Uncomment external_redis if using external Redis server
# external_redis:
#   # support redis, redis+sentinel
#   # host for redis: <host_redis>:<port_redis>
#   # host for redis+sentinel:
#   #  <host_sentinel1>:<port_sentinel1>,<host_sentinel2>:<port_sentinel2>,<host_sentinel3>:<port_sentinel3>
#   host: redis:6379
#   password: 
#   # sentinel_master_set must be set to support redis+sentinel
#   #sentinel_master_set:
#   # db_index 0 is for core, it's unchangeable
#   registry_db_index: 1
#   jobservice_db_index: 2
#   chartmuseum_db_index: 3
#   trivy_db_index: 5
#   idle_timeout_seconds: 30

# Uncomment uaa for trusting the certificate of uaa instance that is hosted via self-signed cert.
# uaa:
#   ca_file: /path/to/ca

# Global proxy
# Config http proxy for components, e.g. http://my.proxy.com:3128
# Components doesn't need to connect to each others via http proxy.
# Remove component from `components` array if want disable proxy
# for it. If you want use proxy for replication, MUST enable proxy
# for core and jobservice, and set `http_proxy` and `https_proxy`.
# Add domain to the `no_proxy` field, when you want disable proxy
# for some special registry.
proxy:
  http_proxy:
  https_proxy:
  no_proxy:
  components:
    - core
    - jobservice
    - trivy

# metric:
#   enabled: false
#   port: 9090
#   path: /metrics

# Trace related config
# only can enable one trace provider(jaeger or otel) at the same time,
# and when using jaeger as provider, can only enable it with agent mode or collector mode.
# if using jaeger collector mode, uncomment endpoint and uncomment username, password if needed
# if using jaeger agetn mode uncomment agent_host and agent_port
# trace:
#   enabled: true
#   # set sample_rate to 1 if you wanna sampling 100% of trace data; set 0.5 if you wanna sampling 50% of trace data, and so forth
#   sample_rate: 1
#   # # namespace used to differenciate different harbor services
#   # namespace:
#   # # attributes is a key value dict contains user defined attributes used to initialize trace provider
#   # attributes:
#   #   application: harbor
#   # # jaeger should be 1.26 or newer.
#   # jaeger:
#   #   endpoint: http://hostname:14268/api/traces
#   #   username:
#   #   password:
#   #   agent_host: hostname
#   #   # export trace data by jaeger.thrift in compact mode
#   #   agent_port: 6831
#   # otel:
#   #   endpoint: hostname:4318
#   #   url_path: /v1/traces
#   #   compression: false
#   #   insecure: true
#   #   timeout: 10s

# enable purge _upload directories
upload_purging:
  enabled: true
  # remove files in _upload directories which exist for a period of time, default is one week.
  age: 168h
  # the interval of the purge operations
  interval: 24h
  dryrun: false

编辑完成后按ESC,然后使用命令:wq保存并推出。

然后继续用命令执行安装./install.sh

安装过程(从别人博客上扒下来的图):

当出现红箭头指向的提示的时候,就表示安装成功了!

然后根据在harbor.yml文件中配置的端口与IP地址(或域名)进行访问

现在Harbor已经可以使用了!

由于我部署的时候没有使用HTTPS,所以使用docker登录的时候会出现一下异常信息(还是借的别人的图):

原因:Docker自从1.3.X之后docker registry交互默认使用的是HTTPS,但是搭建私有镜像默认使用的是HTTP服务,所以与私有镜像交时出现以上错误。

解决办法:

找到docker 的 daemon.json 配置文件,CentOS 7 的路径:/etc/docker/daemon.json(系统版本不同所处位置不同,其他版本的请自行百度),如果路径下没有这个文件自己创建即可。然后再配置文件里加上:

{
  // docker 镜像下载地址
  "registry-mirrors": ["https://mirror.ccs.tencentyun.com"],
   // 不安全的镜像仓库(此处配置Harbor 的地址+端口号)
   "insecure-registries": ["192.168.0.2:8088"],
}

操作完后让这个文件生效:

a.修改完成后reload配置文件
sudo systemctl daemon-reload
 
b.重启docker服务
sudo systemctl restart docker.service

本次的Harbor安装教程就到此为止了,如需了解Harbor的更多详情信息请移步其他博客!

标签:https,Harbor,离线,harbor,proxy,私有,安装程序,镜像
来源: https://www.cnblogs.com/young-q/p/16462210.html

本站声明: 1. iCode9 技术分享网(下文简称本站)提供的所有内容,仅供技术学习、探讨和分享;
2. 关于本站的所有留言、评论、转载及引用,纯属内容发起人的个人观点,与本站观点和立场无关;
3. 关于本站的所有言论和文字,纯属内容发起人的个人观点,与本站观点和立场无关;
4. 本站文章均是网友提供,不完全保证技术分享内容的完整性、准确性、时效性、风险性和版权归属;如您发现该文章侵犯了您的权益,可联系我们第一时间进行删除;
5. 本站为非盈利性的个人网站,所有内容不会用来进行牟利,也不会利用任何形式的广告来间接获益,纯粹是为了广大技术爱好者提供技术内容和技术思想的分享性交流网站。

专注分享技术,共同学习,共同进步。侵权联系[81616952@qq.com]

Copyright (C)ICode9.com, All Rights Reserved.

ICode9版权所有