标签：01 database Standby standby How 2020 SQL 操作步骤 alter
目录简介
Snapshot standby database是ORACLE 11g的新特性。允许Physical standby短时间的使用read write模式。
Snapshot standby是由Physical standby 全新转换而来，可以独立于primary 处理事务，同时能够不断地从primary接受redo data，归档redo data以备后用维护保护。
Snapshot Standby Database的特性：
- Snapshot standby接收并归档redo data，但不应用redo data。
- Snapshot standby转换回physical standby后，开始应用之前接收并归档的redo data。
- 主库传输过来的redo data一直被归档存放起来。
- 转换回physical standby后，所有的本地更新操作将会被丢弃。
- 如果primary移动到新的DB分支(如flashback database,open resetlogs)，snapshot standby database会从新的DB分支继续接受redo data。
- Snapshot standby不能作为switchover或者failover的目标库。Snapshot standby必须转换回Physical standby才能执行角色转换。
- DG配置中的一个Standby发生switchover或者failover角色转换为primary后，Snapshot standby可以接受角色转换后的新的primary database 的redo data。
- Snapshot standby不能为最大保护模式的DG配置中唯一的standby。
- 一旦snapshot standby被激活的时间超出了primary 的最大负载时间，再次的本地更新操作将会产生额外的异常。
- Snapshot standby需要设置Fast Recovery Area。
一、转换物理备库为快照备库
1.设置闪回区
alter system set db_recovery_file_dest_size=5G scope=both sid='*';
alter system set db_recovery_file_dest='/oradata/fra' scope=both sid='*';
若为启用FRA时，会遇到错误ORA-38784和ORA-38786。
SQL> alter database convert to snapshot standby;
alter database convert to snapshot standby
*
ERROR at line 1:
ORA-38784: Cannot create restore point 'SNAPSHOT_STANDBY_REQUIRED_12/01/2020
10:23:25'.
ORA-38786: Recovery area is not enabled.
需要注意的是，启动FRA时，db_recovery_file_dest_size要先于db_recovery_file_dest设置，否则会遇到错误ORA-19802: cannot use DB_RECOVERY_FILE_DEST without DB_RECOVERY_FILE_DEST_SIZE
alert.log
Tue Dec 01 10:26:12 2020
ALTER SYSTEM SET db_recovery_file_dest_size='5G' SCOPE=BOTH SID='*';
Using STANDBY_ARCHIVE_DEST parameter default value as USE_DB_RECOVERY_FILE_DEST
ALTER SYSTEM SET db_recovery_file_dest='/oradata/fra' SCOPE=BOTH SID='*';
Tue Dec 01 10:26:18 2020
db_recovery_file_dest_size of 5120 MB is 0.00% used. This is a
user-specified limit on the amount of space that will be used by this
database for recovery-related files, and does not reflect the amount of
space available in the underlying filesystem or ASM diskgroup.
2.关闭日志应用
SQL> select name,DATABASE_ROLE,SWITCHOVER_STATUS from v$database;
NAME DATABASE_ROLE SWITCHOVER_STATUS
--------- ---------------- --------------------
SYK PHYSICAL STANDBY NOT ALLOWED
SQL> alter database recover managed standby database cancel;
Database altered.
3.重启数据库至MOUNT
SQL> shutdown immediate
SQL> startup mount
4.转换physical standby为snapshot standby
SQL> alter database convert to snapshot standby;
Database altered.
alert.log
Tue Dec 01 10:26:28 2020
alter database convert to snapshot standby
Starting background process RVWR
Tue Dec 01 10:26:28 2020
RVWR started with pid=24, OS id=34478
Allocated 8388608 bytes in shared pool for flashback generation buffer
Created guaranteed restore point SNAPSHOT_STANDBY_REQUIRED_12/01/2020 10:26:28 <----- 1
Begin: Standby Redo Logfile archival
End: Standby Redo Logfile archival
RESETLOGS after incomplete recovery UNTIL CHANGE 1143899
Waiting for all non-current ORLs to be archived...
All non-current ORLs have been archived.
Resetting resetlogs activation ID 1250286088 (0x4a85da08)
Online log /oradata/SYK/redo01.log: Thread 1 Group 1 was previously cleared
Online log /oradata/SYK/redo02.log: Thread 1 Group 2 was previously cleared
Online log /oradata/SYK/redo03.log: Thread 1 Group 3 was previously cleared
Standby became primary SCN: 1143897 <----- 2
Tue Dec 01 10:26:28 2020
Setting recovery target incarnation to 3
WARNING: STANDBY_FILE_MANAGEMENT initialization parameter is
not set to the value "AUTO".
This may cause recovery of the standby database to terminate
prior to applying all available redo data.
It may be necessary to use the ALTER DATABASE CREATE DATAFILE
command to add datafiles created on the primary database.
CONVERT TO SNAPSHOT STANDBY: Complete - Database mounted as snapshot standby <----- 3
Completed: alter database convert to snapshot standby
- 创建Guaranteed Restore Point；
- 主SCN：1143897
- 完成转换
5.打开数据库
SQL> alter database open;
Database altered.
SQL> select open_mode,name,DATABASE_ROLE,SWITCHOVER_STATUS from v$database;
OPEN_MODE NAME DATABASE_ROLE SWITCHOVER_STATUS
-------------------- --------- ---------------- --------------------
READ WRITE SYK SNAPSHOT STANDBY NOT ALLOWED
alert.log
Tue Dec 01 10:26:44 2020
alter database open
Tue Dec 01 10:26:44 2020
Assigning activation ID 1250413997 (0x4a87cdad)
Thread 1 opened at log sequence 1
Current log# 1 seq# 1 mem# 0: /oradata/SYK/redo01.log
Successful open of redo thread 1
MTTR advisory is disabled because FAST_START_MTTR_TARGET is not set
Tue Dec 01 10:26:44 2020
SMON: enabling cache recovery
[34375] Successfully onlined Undo Tablespace 2.
Undo initialization finished serial:0 start:1273929404 end:1273929484 diff:80 (0 seconds)
Dictionary check beginning
Dictionary check complete
Verifying file header compatibility for 11g tablespace encryption..
Verifying 11g file header compatibility for tablespace encryption completed
SMON: enabling tx recovery
Database Characterset is AL32UTF8
No Resource Manager plan active
**********************************************************
WARNING: Files may exists in db_recovery_file_dest
that are not known to the database. Use the RMAN command
CATALOG RECOVERY AREA to re-catalog any such files.
If files cannot be cataloged, then manually delete them
using OS command.
One of the following events caused this:
1. A backup controlfile was restored.
2. A standby controlfile was restored.
3. The controlfile was re-created.
4. db_recovery_file_dest had previously been enabled and
then disabled.
**********************************************************
replication_dependency_tracking turned off (no async multimaster replication found)
Starting background process QMNC
Tue Dec 01 10:26:45 2020
QMNC started with pid=25, OS id=34494
LOGSTDBY: Validating controlfile with logical metadata
LOGSTDBY: Validation complete
Completed: alter database open
二、转换快照备库为物理备库
1.打开数据库至mount状态
SQL> shutdown immediate
SQL> startup mount
SQL> select open_mode,name,DATABASE_ROLE,SWITCHOVER_STATUS from v$database;
OPEN_MODE NAME DATABASE_ROLE SWITCHOVER_STATUS
-------------------- --------- ---------------- --------------------
MOUNTED SYK SNAPSHOT STANDBY NOT ALLOWED
2.转换snapshot standby为physical standby
SQL> alter database convert to physical standby;
此时数据库切换成功后，其状态未非mount状态，需要重启重新mount。
SQL> select open_mode,name,DATABASE_ROLE,SWITCHOVER_STATUS from v$database;
select open_mode,name,DATABASE_ROLE,SWITCHOVER_STATUS from v$database
*
ERROR at line 1:
ORA-01507: database not mounted
alert.log
Tue Dec 01 13:21:27 2020
alter database convert to physical standby
ALTER DATABASE CONVERT TO PHYSICAL STANDBY (SYK)
Flashback Restore Start
Flashback Restore Complete
Drop guaranteed restore point <----- 删除GRP
Stopping background process RVWR
Deleted Oracle managed file /oradata/fra/SYK/flashback/o1_mf_hwcbgnl0_.flb
Deleted Oracle managed file /oradata/fra/SYK/flashback/o1_mf_hwcbgp0n_.flb
Guaranteed restore point dropped
Clearing standby activation ID 1250413997 (0x4a87cdad)
The primary database controlfile was created using the
'MAXLOGFILES 16' clause.
There is space for up to 13 standby redo logfiles
Use the following SQL commands on the standby database to create
standby redo logfiles that match the primary database:
ALTER DATABASE ADD STANDBY LOGFILE 'srl1.f' SIZE 52428800;
ALTER DATABASE ADD STANDBY LOGFILE 'srl2.f' SIZE 52428800;
ALTER DATABASE ADD STANDBY LOGFILE 'srl3.f' SIZE 52428800;
ALTER DATABASE ADD STANDBY LOGFILE 'srl4.f' SIZE 52428800;
Shutting down archive processes
Archiving is disabled
Tue Dec 01 13:21:29 2020
ARCH shutting down
ARC0: Archival stopped
Tue Dec 01 13:21:29 2020
ARCH shutting down
ARC3: Archival stopped
Tue Dec 01 13:21:29 2020
ARCH shutting down
ARC2: Archival stopped
Tue Dec 01 13:21:29 2020
ARCH shutting down
ARC1: Archival stopped
Completed: alter database convert to physical standby <----- 完成切换
3.restart数据库,开启日志应用
SQL> shutdown immediate
SQL> startup mount
SQL> alter database open read only;
SQL> select open_mode,name,DATABASE_ROLE,SWITCHOVER_STATUS from v$database;
OPEN_MODE NAME DATABASE_ROLE SWITCHOVER_STATUS
-------------------- --------- ---------------- --------------------
READ ONLY SYK PHYSICAL STANDBY RECOVERY NEEDED
SQL> alter database recover managed standby database using current logfile disconnect from session;
Database altered.
SQL> select open_mode,name,DATABASE_ROLE,SWITCHOVER_STATUS from v$database;
OPEN_MODE NAME DATABASE_ROLE SWITCHOVER_STATUS
-------------------- --------- ---------------- --------------------
READ ONLY WITH APPLY SYK PHYSICAL STANDBY NOT ALLOWED
alert.log
Tue Dec 01 13:26:41 2020
alter database recover managed standby database using current logfile disconnect from session
Attempt to start background Managed Standby Recovery process (SYK)
Tue Dec 01 13:26:41 2020
MRP0 started with pid=24, OS id=45436
MRP0: Background Managed Standby Recovery process started (SYK)
started logmerger process
Tue Dec 01 13:26:46 2020
Managed Standby Recovery starting Real Time Apply
Parallel Media Recovery started with 2 slaves
Waiting for all non-current ORLs to be archived...
All non-current ORLs have been archived.
Clearing online redo logfile 1 /oradata/SYK/redo01.log
Clearing online log 1 of thread 1 sequence number 1
Clearing online redo logfile 1 complete
Clearing online redo logfile 2 /oradata/SYK/redo02.log
Clearing online log 2 of thread 1 sequence number 2
Clearing online redo logfile 2 complete
Media Recovery Log /oraarch/1_22_1057859074.arc
Completed: alter database recover managed standby database using current logfile disconnect from session
Media Recovery Log /oradata/fra/SYK/archivelog/2020_12_01/o1_mf_1_23_hwcbph9p_.arc
Media Recovery Log /oraarch/1_24_1057859074.arc
Recovery of Online Redo Log: Thread 1 Group 13 Seq 25 Reading mem 0
Mem# 0: /oradata/stby_redo13.log
标签：01,database,Standby,standby,How,2020,SQL,操作步骤,alter 来源： https://www.cnblogs.com/syksky/p/16425336.html
本站声明： 1. iCode9 技术分享网（下文简称本站）提供的所有内容，仅供技术学习、探讨和分享； 2. 关于本站的所有留言、评论、转载及引用，纯属内容发起人的个人观点，与本站观点和立场无关； 3. 关于本站的所有言论和文字，纯属内容发起人的个人观点，与本站观点和立场无关； 4. 本站文章均是网友提供，不完全保证技术分享内容的完整性、准确性、时效性、风险性和版权归属；如您发现该文章侵犯了您的权益，可联系我们第一时间进行删除； 5. 本站为非盈利性的个人网站，所有内容不会用来进行牟利，也不会利用任何形式的广告来间接获益，纯粹是为了广大技术爱好者提供技术内容和技术思想的分享性交流网站。