标签：profile name default vlan AP interface 过程 port 抓包
旁挂三层组网直接转发：
一、配置：
AC配置：
#
vlan batch 100 to 102
#
vlan pool sta-pool
vlan 101 to 102
#
dhcp enable
#
ip pool huawei
gateway-list 10.23.10.1
network 10.23.10.0 mask 255.255.255.0
option 43 sub-option 3 ascii 10.23.100.1
#
interface Vlanif100
ip address 10.23.100.1 255.255.255.0
dhcp select global
#
interface GigabitEthernet0/0/1
port link-type trunk
port trunk allow-pass vlan 100
#
ip route-static 10.23.10.0 255.255.255.0 10.23.100.2
#
capwap source interface vlanif100
#
wlan
traffic-profile name default
security-profile name default
security-profile name wlan-net
security wpa-wpa2 psk pass-phrase zgp`123456 aes
security-profile name default-wds
security-profile name default-mesh
ssid-profile name default
ssid-profile name wlan-net
ssid wlan-net
vap-profile name default
vap-profile name wlan-net
service-vlan vlan-pool sta-pool
ssid-profile wlan-net
security-profile wlan-net
wds-profile name default
mesh-handover-profile name default
mesh-profile name default
regulatory-domain-profile name default
air-scan-profile name default
rrm-profile name default
calibrate auto-channel-select disable
calibrate auto-txpower-select disable
radio-2g-profile name default
radio-5g-profile name default
wids-spoof-profile name default
wids-profile name default
wireless-access-specification
ap-system-profile name default
port-link-profile name default
wired-port-profile name default
serial-profile name preset-enjoyor-toeap
ap-group name default
ap-group name ap-group1
radio 0
vap-profile wlan-net wlan 1
radio 1
vap-profile wlan-net wlan 1
ap-id 0 type-id 35 ap-mac 00e0-fc39-5160 ap-sn 2102354483104104042A
ap-name area_1
ap-group ap-group1
radio 0
channel 20mhz 6
eirp 127
radio 1
channel 20mhz 149
eirp 127
provision-ap
#
SwitchB
#
sysname SwitchB
#
vlan batch 10 100 to 102
#
dhcp enable
#
interface Vlanif10
ip address 10.23.10.1 255.255.255.0
dhcp select relay
dhcp relay server-ip 10.23.100.1
#
interface Vlanif100
ip address 10.23.100.2 255.255.255.0
#
interface Vlanif101
ip address 10.23.101.1 255.255.255.0
dhcp select interface
#
interface Vlanif102
ip address 10.23.102.1 255.255.255.0
dhcp select interface
#
interface GigabitEthernet0/0/1
port link-type trunk
port trunk allow-pass vlan 10 101 to 102
#
interface GigabitEthernet0/0/2
port link-type trunk
port trunk allow-pass vlan 100
#
Switch A
#
sysname SwitchA
#
vlan batch 10 101 to 102
#
interface GigabitEthernet0/0/1
port link-type trunk
port trunk pvid vlan 10
port trunk allow-pass vlan 10 101 to 102
port-isolate enable group 1
#
interface GigabitEthernet0/0/2
port link-type trunk
port trunk allow-pass vlan 10 101 to 102
#
二、抓包交互过程
关键内容在图片中，如有描述不清楚或有不一样的见解可评论区评论
—————————有任何见解欢迎评论区评论，写的有任何问题也可评论，如果需要交互过程抓包的可在评论区留言✉————————
标签：profile,name,default,vlan,AP,interface,过程,port,抓包 来源： https://www.cnblogs.com/GeorgePing/p/16339521.html
本站声明： 1. iCode9 技术分享网（下文简称本站）提供的所有内容，仅供技术学习、探讨和分享； 2. 关于本站的所有留言、评论、转载及引用，纯属内容发起人的个人观点，与本站观点和立场无关； 3. 关于本站的所有言论和文字，纯属内容发起人的个人观点，与本站观点和立场无关； 4. 本站文章均是网友提供，不完全保证技术分享内容的完整性、准确性、时效性、风险性和版权归属；如您发现该文章侵犯了您的权益，可联系我们第一时间进行删除； 5. 本站为非盈利性的个人网站，所有内容不会用来进行牟利，也不会利用任何形式的广告来间接获益，纯粹是为了广大技术爱好者提供技术内容和技术思想的分享性交流网站。