标签：tinyalu binsof 示例 leg bfm uvm test bins op

资料来源

(1) 《The UVM Primer》第11章;

1.用UVM启动仿真

1.1 top.sv

注1:在run_test()语句前,先进行interface的config_db::set();

module top;
   import uvm_pkg::*;
`include "uvm_macros.svh"

   import   tinyalu_pkg::*;
`include "tinyalu_macros.svh"

   tinyalu_bfm       bfm();
   tinyalu DUT (.A(bfm.A), .B(bfm.B), .op(bfm.op), 
                .clk(bfm.clk), .reset_n(bfm.reset_n), 
                .start(bfm.start), .done(bfm.done), .result(bfm.result));

initial begin
  uvm_config_db #(virtual tinyalu_bfm)::set(null, "*", "bfm", bfm);
  run_test();
end

endmodule : top

1.2 tinyalu_pkg.sv

package tinyalu_pkg;
   import uvm_pkg::*;
`include "uvm_macros.svh"
   
      typedef enum bit[2:0] {no_op  = 3'b000,
                          add_op = 3'b001, 
                          and_op = 3'b010,
                          xor_op = 3'b011,
                          mul_op = 3'b100,
                          rst_op = 3'b111} operation_t;

   virtual tinyalu_bfm bfm_g;
   

`include "coverage.svh"
`include "random_tester.svh"
`include "add_tester.svh"   
`include "scoreboard.svh"
`include "random_test.svh"
`include "add_test.svh"
   
   
endpackage : tinyalu_pkg

1.3 tinyalu_bfm.sv

interface tinyalu_bfm;
   import tinyalu_pkg::*;

   byte         unsigned        A;
   byte         unsigned        B;
   bit          clk;
   bit          reset_n;
   wire [2:0]   op;
   bit          start;
   wire         done;
   wire [15:0]  result;
   operation_t  op_set;

   assign op = op_set;

   task reset_alu();
      reset_n = 1'b0;
      @(negedge clk);
      @(negedge clk);
      reset_n = 1'b1;
      start = 1'b0;
   endtask : reset_alu
   


   task send_op(input byte iA, input byte iB, input operation_t iop, shortint alu_result);
      if (iop == rst_op) begin
         @(negedge clk);
         op_set = iop;
         @(posedge clk);
         reset_n = 1'b0;
         start = 1'b0;
         @(posedge clk);
         #1;
         reset_n = 1'b1;
      end else begin
         @(negedge clk);
         op_set = iop;
         A = iA;
         B = iB;
         start = 1'b1;
         if (iop == no_op) begin
            @(posedge clk);
            #1;
            start = 1'b0;           
         end else begin
            do
              @(negedge clk);
            while (done == 0);
            alu_result = result;
            start = 1'b0;
         end
      end // else: !if(iop == rst_op)
      
   endtask : send_op

   initial begin
      clk = 0;
      forever begin
         #10;
         clk = ~clk;
      end
   end


endinterface : tinyalu_bfm

1.4 coverage.svh

class coverage;

   virtual tinyalu_bfm bfm;


   byte         unsigned        A;
   byte         unsigned        B;
   operation_t  op_set;

   covergroup op_cov;

      coverpoint op_set {
         bins single_cycle[] = {[add_op : xor_op], rst_op,no_op};
         bins multi_cycle = {mul_op};

         bins opn_rst[] = ([add_op:mul_op] => rst_op);
         bins rst_opn[] = (rst_op => [add_op:mul_op]);

         bins sngl_mul[] = ([add_op:xor_op],no_op => mul_op);
         bins mul_sngl[] = (mul_op => [add_op:xor_op], no_op);

         bins twoops[] = ([add_op:mul_op] [* 2]);
         bins manymult = (mul_op [* 3:5]);


      }

   endgroup

   covergroup zeros_or_ones_on_ops;

      all_ops : coverpoint op_set {
         ignore_bins null_ops = {rst_op, no_op};}

      a_leg: coverpoint A {
         bins zeros = {'h00};
         bins others= {['h01:'hFE]};
         bins ones  = {'hFF};
      }

      b_leg: coverpoint B {
         bins zeros = {'h00};
         bins others= {['h01:'hFE]};
         bins ones  = {'hFF};
      }

      op_00_FF:  cross a_leg, b_leg, all_ops {
         bins add_00 = binsof (all_ops) intersect {add_op} &&
                       (binsof (a_leg.zeros) || binsof (b_leg.zeros));

         bins add_FF = binsof (all_ops) intersect {add_op} &&
                       (binsof (a_leg.ones) || binsof (b_leg.ones));

         bins and_00 = binsof (all_ops) intersect {and_op} &&
                       (binsof (a_leg.zeros) || binsof (b_leg.zeros));

         bins and_FF = binsof (all_ops) intersect {and_op} &&
                       (binsof (a_leg.ones) || binsof (b_leg.ones));

         bins xor_00 = binsof (all_ops) intersect {xor_op} &&
                       (binsof (a_leg.zeros) || binsof (b_leg.zeros));

         bins xor_FF = binsof (all_ops) intersect {xor_op} &&
                       (binsof (a_leg.ones) || binsof (b_leg.ones));

         bins mul_00 = binsof (all_ops) intersect {mul_op} &&
                       (binsof (a_leg.zeros) || binsof (b_leg.zeros));

         bins mul_FF = binsof (all_ops) intersect {mul_op} &&
                       (binsof (a_leg.ones) || binsof (b_leg.ones));

         bins mul_max = binsof (all_ops) intersect {mul_op} &&
                        (binsof (a_leg.ones) && binsof (b_leg.ones));

         ignore_bins others_only =
                                  binsof(a_leg.others) && binsof(b_leg.others);

      }

endgroup

   function new (virtual tinyalu_bfm b);
     op_cov = new();
     zeros_or_ones_on_ops = new();
     bfm = b;
   endfunction : new



   task execute();
      forever begin  : sampling_block
         @(negedge bfm.clk);
         A = bfm.A;
         B = bfm.B;
         op_set = bfm.op_set;
         op_cov.sample();
         zeros_or_ones_on_ops.sample();
      end : sampling_block
   endtask : execute

endclass : coverage

1.5 scoreboard.svh

class scoreboard;
      virtual tinyalu_bfm bfm;

   function new (virtual tinyalu_bfm b);
     bfm = b;
   endfunction : new

   task execute();
      shortint predicted_result;
      forever begin : self_checker
         @(posedge bfm.done)
       #1;
           case (bfm.op_set)
             add_op: predicted_result = bfm.A + bfm.B;
             and_op: predicted_result = bfm.A & bfm.B;
             xor_op: predicted_result = bfm.A ^ bfm.B;
             mul_op: predicted_result = bfm.A * bfm.B;
           endcase // case (op_set)
         
         if ((bfm.op_set != no_op) && (bfm.op_set != rst_op))
           if (predicted_result != bfm.result)
             $error ("FAILED: A: %0h  B: %0h  op: %s result: %0h",
                     bfm.A, bfm.B, bfm.op_set.name(), bfm.result);
         
      end : self_checker
   endtask : execute
   
   
endclass : scoreboard

1.6 random_tester.svh

class random_tester;

   virtual tinyalu_bfm bfm;

   function new (virtual tinyalu_bfm b);
       bfm = b;
   endfunction : new


   protected virtual function operation_t get_op();
      bit [2:0] op_choice;
      op_choice = $random;
      case (op_choice)
        3'b000 : return no_op;
        3'b001 : return add_op;
        3'b010 : return and_op;
        3'b011 : return xor_op;
        3'b100 : return mul_op;
        3'b101 : return no_op;
        3'b110 : return rst_op;
        3'b111 : return rst_op;
      endcase // case (op_choice)
   endfunction : get_op

   protected virtual function byte get_data();
      bit [1:0] zero_ones;
      zero_ones = $random;
      if (zero_ones == 2'b00)
        return 8'h00;
      else if (zero_ones == 2'b11)
        return 8'hFF;
      else
        return $random;
   endfunction : get_data

   virtual task execute();
      byte         unsigned        iA;
      byte         unsigned        iB;
      operation_t                  op_set;
      shortint     result;
      bfm.reset_alu();
      repeat (1000) begin : random_loop
         op_set = get_op();
         iA = get_data();
         iB = get_data();
         bfm.send_op(iA, iB, op_set, result);
      end : random_loop
      #500;
   endtask : execute

endclass : random_tester

1.7 random_test.svh

class random_test extends uvm_test;
   `uvm_component_utils(random_test);

 virtual tinyalu_bfm bfm;
   
   function new (string name, uvm_component parent);
      super.new(name,parent);
      if(!uvm_config_db #(virtual tinyalu_bfm)::get(null, "*","bfm", bfm))
        $fatal("Failed to get BFM");
   endfunction : new


   task run_phase(uvm_phase phase);
      random_tester    random_tester_h;
      coverage  coverage_h;
      scoreboard scoreboard_h;

      phase.raise_objection(this);

      random_tester_h    = new(bfm);
      coverage_h  = new(bfm);
      scoreboard_h = new(bfm);
      
      fork
         coverage_h.execute();
         scoreboard_h.execute();
      join_none

      random_tester_h.execute();
      phase.drop_objection(this);
   endtask : run_phase

endclass

 

标签：tinyalu,binsof,示例,leg,bfm,uvm,test,bins,op
来源： https://www.cnblogs.com/csjt/p/16135702.html

本站声明： 1. iCode9 技术分享网（下文简称本站）提供的所有内容，仅供技术学习、探讨和分享；
2. 关于本站的所有留言、评论、转载及引用，纯属内容发起人的个人观点，与本站观点和立场无关；
3. 关于本站的所有言论和文字，纯属内容发起人的个人观点，与本站观点和立场无关；
4. 本站文章均是网友提供，不完全保证技术分享内容的完整性、准确性、时效性、风险性和版权归属；如您发现该文章侵犯了您的权益，可联系我们第一时间进行删除；
5. 本站为非盈利性的个人网站，所有内容不会用来进行牟利，也不会利用任何形式的广告来间接获益，纯粹是为了广大技术爱好者提供技术内容和技术思想的分享性交流网站。