标签：00 21 OSPF 08 GigabitEthernet0 应用 100 ospf
R1
<Huawei>system-view
Enter system view, return user view with Ctrl+Z.
[Huawei]sy
[Huawei]sysname r1
[r1]int
[r1]interface g0/0/0
[r1-GigabitEthernet0/0/0]ip ad
[r1-GigabitEthernet0/0/0]ip address 172.16.64.1 20
Jan 21 2022 17:00:53-08:00 r1 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP
on the interface GigabitEthernet0/0/0 has entered the UP state.
[r1-GigabitEthernet0/0/0]int
[r1-GigabitEthernet0/0/0]qu
[r1-GigabitEthernet0/0/0]quit
[r1]int
[r1]interface l
[r1]interface LoopBack 0
[r1-LoopBack0]ip ad
[r1-LoopBack0]ip address 172.16.80.1 20
[r1-LoopBack0]qu
[r1-LoopBack0]quit
[r1]
Please check whether system data has been changed, and save data in time
Configuration console time out, please press any key to log on
<r1>sy
<r1>system-view
Enter system view, return user view with Ctrl+Z.
[r1]os
[r1]ospf 100 r
[r1]ospf 100 router-id 1.1.1.1
[r1-ospf-100]ar
[r1-ospf-100]area1
^
Error: Unrecognized command found at '^' position.
[r1-ospf-100]ne
[r1-ospf-100]nexthop
[r1-ospf-100]ar
[r1-ospf-100]area 1
[r1-ospf-100-area-0.0.0.1]ne
[r1-ospf-100-area-0.0.0.1]network 0.0.0.0 255.255.255.255
[r1-ospf-100-area-0.0.0.1]qu
[r1-ospf-100-area-0.0.0.1]quit
[r1-ospf-100]
Jan 21 2022 17:19:08-08:00 r1 %%01OSPF/4/NBR_CHANGE_E(l)[0]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=25600, NeighborAddress=2.64.16.172, Neig
hborEvent=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init)
[r1-ospf-100]
Jan 21 2022 17:19:08-08:00 r1 %%01OSPF/4/NBR_CHANGE_E(l)[1]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=25600, NeighborAddress=2.64.16.172, Neig
hborEvent=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=ExStart
)
[r1-ospf-100]
Jan 21 2022 17:19:08-08:00 r1 %%01OSPF/4/NBR_CHANGE_E(l)[2]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=25600, NeighborAddress=2.64.16.172, Neig
hborEvent=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=E
xchange)
[r1-ospf-100]
Jan 21 2022 17:19:08-08:00 r1 %%01OSPF/4/NBR_CHANGE_E(l)[3]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=25600, NeighborAddress=2.64.16.172, Neig
hborEvent=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Loa
ding)
[r1-ospf-100]
Jan 21 2022 17:19:08-08:00 r1 %%01OSPF/4/NBR_CHANGE_E(l)[4]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=25600, NeighborAddress=2.64.16.172, Neig
hborEvent=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full)
[r1-ospf-100]
Please check whether system data has been changed, and save data in time
Configuration console time out, please press any key to log on
<r1>usy
<r1>sy
<r1>system-view
Enter system view, return user view with Ctrl+Z.
[r1]int
[r1]interface g0/0/0
[r1-GigabitEthernet0/0/0]os
[r1-GigabitEthernet0/0/0]ospf a
[r1-GigabitEthernet0/0/0]ospf authentication-mode s
[r1-GigabitEthernet0/0/0]ospf authentication-mode simple c
[r1-GigabitEthernet0/0/0]ospf authentication-mode simple cipher 123
[r1-GigabitEthernet0/0/0]
Jan 21 2022 17:37:47-08:00 r1 %%01RM/4/IPV4_DEFT_RT_CHG(l)[0]:IPV4 default Route
is changed. (ChangeType=Delete, InstanceId=0, Protocol=OSPF, ExitIf=GigabitEthe
rnet0/0/0, Nexthop=172.16.64.2, Neighbour=0.0.0.0, Preference=2516582400, Label=
NULL, Metric=16777216)
[r1-GigabitEthernet0/0/0]qu
[r1-GigabitEthernet0/0/0]quit
[r1]os
[r1]ospf 100
[r1-ospf-100]ar
[r1-ospf-100]are
[r1-ospf-100]area 1
[r1-ospf-100-area-0.0.0.1]a
[r1-ospf-100-area-0.0.0.1]abr-summary
[r1-ospf-100-area-0.0.0.1]arp-ping
[r1-ospf-100-area-0.0.0.1]authentication-mode s
[r1-ospf-100-area-0.0.0.1]authentication-mode simple c
[r1-ospf-100-area-0.0.0.1]authentication-mode simple cipher 123
[r1-ospf-100-area-0.0.0.1]qu
[r1-ospf-100-area-0.0.0.1]quit
[r1-ospf-100]qu
[r1-ospf-100]quit
[r1]int
[r1]interface g0/0/0
[r1-GigabitEthernet0/0/0]os
[r1-GigabitEthernet0/0/0]ospf h
[r1-GigabitEthernet0/0/0]ospf t
[r1-GigabitEthernet0/0/0]ospf trans-delay
[r1-GigabitEthernet0/0/0]ospf timer h
[r1-GigabitEthernet0/0/0]ospf timer hello 5
[r1-GigabitEthernet0/0/0]
Jan 21 2022 17:42:28-08:00 r1 %%01OSPF/3/NBR_CHG_DOWN(l)[1]:Neighbor event:neigh
bor state changed to Down. (ProcessId=25600, NeighborAddress=2.2.2.2, NeighborEv
ent=InactivityTimer, NeighborPreviousState=Full, NeighborCurrentState=Down)
[r1-GigabitEthernet0/0/0]
Jan 21 2022 17:42:28-08:00 r1 %%01OSPF/3/NBR_DOWN_REASON(l)[2]:Neighbor state le
aves full or changed to Down. (ProcessId=25600, NeighborRouterId=2.2.2.2, Neighb
orAreaId=16777216, NeighborInterface=GigabitEthernet0/0/0,NeighborDownImmediate
reason=Neighbor Down Due to Inactivity, NeighborDownPrimeReason=Interface Parame
ter Mismatch, NeighborChangeTime=2022-01-21 17:42:28-08:00)
[r1-GigabitEthernet0/0/0]
Jan 21 2022 17:42:28-08:00 r1 %%01RM/4/IPV4_DEFT_RT_CHG(l)[3]:IPV4 default Route
is changed. (ChangeType=Delete, InstanceId=0, Protocol=OSPF, ExitIf=GigabitEthe
rnet0/0/0, Nexthop=172.16.64.2, Neighbour=0.0.0.0, Preference=2516582400, Label=
NULL, Metric=16777216)
[r1-GigabitEthernet0/0/0]
Jan 21 2022 17:42:38-08:00 r1 %%01OSPF/4/NBR_CHANGE_E(l)[4]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=25600, NeighborAddress=2.64.16.172, Neig
hborEvent=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init)
[r1-GigabitEthernet0/0/0]
Jan 21 2022 17:42:38-08:00 r1 %%01OSPF/4/NBR_CHANGE_E(l)[5]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=25600, NeighborAddress=2.64.16.172, Neig
hborEvent=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=ExStart
)
[r1-GigabitEthernet0/0/0]
Jan 21 2022 17:42:38-08:00 r1 %%01OSPF/4/NBR_CHANGE_E(l)[6]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=25600, NeighborAddress=2.64.16.172, Neig
hborEvent=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=E
xchange)
[r1-GigabitEthernet0/0/0]
Jan 21 2022 17:42:38-08:00 r1 %%01OSPF/4/NBR_CHANGE_E(l)[7]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=25600, NeighborAddress=2.64.16.172, Neig
hborEvent=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Loa
ding)
[r1-GigabitEthernet0/0/0]
Jan 21 2022 17:42:38-08:00 r1 %%01OSPF/4/NBR_CHANGE_E(l)[8]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=25600, NeighborAddress=2.64.16.172, Neig
hborEvent=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full)
R2
<Huawei>system-view
Enter system view, return user view with Ctrl+Z.
[Huawei]sy
[Huawei]sysname r2
[r2]int
[r2]interface g0/0/0
[r2-GigabitEthernet0/0/0]ip ad
[r2-GigabitEthernet0/0/0]ip address 172.16.64.2 20
Jan 21 2022 17:03:06-08:00 r2 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP
on the interface GigabitEthernet0/0/0 has entered the UP state.
[r2-GigabitEthernet0/0/0]qu
[r2-GigabitEthernet0/0/0]quit
[r2]int
[r2]interface l
[r2]interface LoopBack 0
[r2-LoopBack0]172.16.112.1 20
^
Error: Unrecognized command found at '^' position.
[r2-LoopBack0]ip ad
[r2-LoopBack0]ip address 172.16.112.1 20
[r2-LoopBack0]qu
[r2-LoopBack0]quit
[r2]int
[r2]interface g0/0/1
[r2-GigabitEthernet0/0/1]ip ad
[r2-GigabitEthernet0/0/1]ip address 172.16.96.1 20
Jan 21 2022 17:04:51-08:00 r2 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP
on the interface GigabitEthernet0/0/1 has entered the UP state.
[r2-GigabitEthernet0/0/1]qu
[r2-GigabitEthernet0/0/1]quit
[r2]
Please check whether system data has been changed, and save data in time
Configuration console time out, please press any key to log on
<r2>sy
<r2>system-view
Enter system view, return user view with Ctrl+Z.
[r2]os
[r2]ospf 100 r
[r2]ospf 100 router-id 2.2.2.2
[r2-ospf-100]ar
[r2-ospf-100]area 1
[r2-ospf-100-area-0.0.0.1]ne
[r2-ospf-100-area-0.0.0.1]network 0.0.0.0 255.255.255.255
[r2-ospf-100-area-0.0.0.1]
Jan 21 2022 17:19:08-08:00 r2 %%01OSPF/4/NBR_CHANGE_E(l)[0]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=25600, NeighborAddress=1.64.16.172, Neig
hborEvent=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init)
[r2-ospf-100-area-0.0.0.1]
Jan 21 2022 17:19:08-08:00 r2 %%01OSPF/4/NBR_CHANGE_E(l)[1]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=25600, NeighborAddress=1.64.16.172, Neig
hborEvent=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=2Way)
[r2-ospf-100-area-0.0.0.1]
Jan 21 2022 17:19:08-08:00 r2 %%01OSPF/4/NBR_CHANGE_E(l)[2]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=25600, NeighborAddress=1.64.16.172, Neig
hborEvent=AdjOk?, NeighborPreviousState=2Way, NeighborCurrentState=ExStart)
[r2-ospf-100-area-0.0.0.1]
Jan 21 2022 17:19:08-08:00 r2 %%01OSPF/4/NBR_CHANGE_E(l)[3]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=25600, NeighborAddress=1.64.16.172, Neig
hborEvent=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=E
xchange)
[r2-ospf-100-area-0.0.0.1]
Jan 21 2022 17:19:09-08:00 r2 %%01OSPF/4/NBR_CHANGE_E(l)[4]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=25600, NeighborAddress=1.64.16.172, Neig
hborEvent=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Loa
ding)
[r2-ospf-100-area-0.0.0.1]
Jan 21 2022 17:19:09-08:00 r2 %%01OSPF/4/NBR_CHANGE_E(l)[5]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=25600, NeighborAddress=1.64.16.172, Neig
hborEvent=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full)
[r2-ospf-100-area-0.0.0.1]qu
[r2-ospf-100-area-0.0.0.1]quit
[r2-ospf-100]
Jan 21 2022 17:19:59-08:00 r2 %%01OSPF/4/NBR_CHANGE_E(l)[6]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=25600, NeighborAddress=2.96.16.172, Neig
hborEvent=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init)
[r2-ospf-100]
Jan 21 2022 17:20:07-08:00 r2 %%01OSPF/4/NBR_CHANGE_E(l)[7]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=25600, NeighborAddress=2.96.16.172, Neig
hborEvent=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=ExStart
)
[r2-ospf-100]
Jan 21 2022 17:20:07-08:00 r2 %%01OSPF/4/NBR_CHANGE_E(l)[8]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=25600, NeighborAddress=2.96.16.172, Neig
hborEvent=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=E
xchange)
[r2-ospf-100]
Jan 21 2022 17:20:07-08:00 r2 %%01OSPF/4/NBR_CHANGE_E(l)[9]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=25600, NeighborAddress=2.96.16.172, Neig
hborEvent=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Loa
ding)
[r2-ospf-100]
Jan 21 2022 17:20:07-08:00 r2 %%01OSPF/4/NBR_CHANGE_E(l)[10]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=2.96.16.172, Nei
ghborEvent=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full
)
[r2-ospf-100]
Please check whether system data has been changed, and save data in time
Configuration console time out, please press any key to log on
<r2>y
<r2>sy
<r2>system-view
Enter system view, return user view with Ctrl+Z.
[r2]int
[r2]interface g0/0/0
[r2-GigabitEthernet0/0/0]os
[r2-GigabitEthernet0/0/0]ospf a
[r2-GigabitEthernet0/0/0]ospf authentication-mode si
[r2-GigabitEthernet0/0/0]ospf authentication-mode simple ci
[r2-GigabitEthernet0/0/0]ospf authentication-mode simple cipher 123
[r2-GigabitEthernet0/0/0]qu
[r2-GigabitEthernet0/0/0]quit
[r2]int
[r2]interface g0/0/1
[r2-GigabitEthernet0/0/1]os
[r2-GigabitEthernet0/0/1]ospf a
[r2-GigabitEthernet0/0/1]ospf authentication-mode s
[r2-GigabitEthernet0/0/1]ospf authentication-mode simple c
[r2-GigabitEthernet0/0/1]ospf authentication-mode simple cipher 123
[r2-GigabitEthernet0/0/1]os
[r2-GigabitEthernet0/0/1]ospf a
[r2-GigabitEthernet0/0/1]ospf authentication-mode m
[r2-GigabitEthernet0/0/1]ospf authentication-mode md5
[r2-GigabitEthernet0/0/1]
Jan 21 2022 17:37:47-08:00 r2 %%01OSPF/3/NBR_CHG_DOWN(l)[0]:Neighbor event:neigh
bor state changed to Down. (ProcessId=25600, NeighborAddress=3.3.3.3, NeighborEv
ent=InactivityTimer, NeighborPreviousState=Full, NeighborCurrentState=Down)
[r2-GigabitEthernet0/0/1]
Jan 21 2022 17:37:47-08:00 r2 %%01OSPF/3/NBR_DOWN_REASON(l)[1]:Neighbor state le
aves full or changed to Down. (ProcessId=25600, NeighborRouterId=3.3.3.3, Neighb
orAreaId=16777216, NeighborInterface=GigabitEthernet0/0/1,NeighborDownImmediate
reason=Neighbor Down Due to Inactivity, NeighborDownPrimeReason=Hello Not Seen,
NeighborChangeTime=2022-01-21 17:37:47-08:00)
[r2-GigabitEthernet0/0/1]
Jan 21 2022 17:37:47-08:00 r2 %%01RM/4/IPV4_DEFT_RT_CHG(l)[2]:IPV4 default Route
is changed. (ChangeType=Delete, InstanceId=0, Protocol=OSPF, ExitIf=GigabitEthe
rnet0/0/1, Nexthop=172.16.96.2, Neighbour=0.0.0.0, Preference=2516582400, Label=
NULL, Metric=16777216)
[r2-GigabitEthernet0/0/1]
Jan 21 2022 17:38:00-08:00 r2 %%01OSPF/4/NBR_CHANGE_E(l)[3]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=25600, NeighborAddress=2.96.16.172, Neig
hborEvent=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init)
[r2-GigabitEthernet0/0/1]
Jan 21 2022 17:38:00-08:00 r2 %%01OSPF/4/NBR_CHANGE_E(l)[4]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=25600, NeighborAddress=2.96.16.172, Neig
hborEvent=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=ExStart
)
[r2-GigabitEthernet0/0/1]
Jan 21 2022 17:38:00-08:00 r2 %%01OSPF/4/NBR_CHANGE_E(l)[5]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=25600, NeighborAddress=2.96.16.172, Neig
hborEvent=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=E
xchange)
[r2-GigabitEthernet0/0/1]
Jan 21 2022 17:38:00-08:00 r2 %%01OSPF/4/NBR_CHANGE_E(l)[6]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=25600, NeighborAddress=2.96.16.172, Neig
hborEvent=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Loa
ding)
[r2-GigabitEthernet0/0/1]
Jan 21 2022 17:38:00-08:00 r2 %%01OSPF/4/NBR_CHANGE_E(l)[7]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=25600, NeighborAddress=2.96.16.172, Neig
hborEvent=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full)
[r2-GigabitEthernet0/0/1]qu
[r2]os
[r2]ospf 100
[r2-ospf-100]are
[r2-ospf-100]area 1
[r2-ospf-100-area-0.0.0.1]a
[r2-ospf-100-area-0.0.0.1]abr-summarya\
[r2-ospf-100-area-0.0.0.1]abr-summar
[r2-ospf-100-area-0.0.0.1]abr-summary
[r2-ospf-100-area-0.0.0.1]au
[r2-ospf-100-area-0.0.0.1]authentication-mode s
[r2-ospf-100-area-0.0.0.1]authentication-mode simple c
[r2-ospf-100-area-0.0.0.1]authentication-mode simple cipher 123
[r2-ospf-100-area-0.0.0.1]qu
[r2-ospf-100-area-0.0.0.1]quit
[r2-ospf-100]qu
[r2-ospf-100]quit
[r2]int
[r2]interface g0/0/0
[r2-GigabitEthernet0/0/0]os
[r2-GigabitEthernet0/0/0]ospf t
[r2-GigabitEthernet0/0/0]ospf trans-delay
[r2-GigabitEthernet0/0/0]ospf timer h
[r2-GigabitEthernet0/0/0]ospf timer hello 5
[r2-GigabitEthernet0/0/0]
Jan 21 2022 17:42:33-08:00 r2 %%01OSPF/3/NBR_DOWN_REASON(l)[8]:Neighbor state le
aves full or changed to Down. (ProcessId=25600, NeighborRouterId=1.1.1.1, Neighb
orAreaId=16777216, NeighborInterface=GigabitEthernet0/0/0,NeighborDownImmediate
reason=Neighbor Down Due to 1-Wayhello Received, NeighborDownPrimeReason=1-Wayhe
llo Received, NeighborChangeTime=2022-01-21 17:42:33-08:00)
[r2-GigabitEthernet0/0/0]
Jan 21 2022 17:42:33-08:00 r2 %%01OSPF/4/NBR_CHANGE_E(l)[9]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=25600, NeighborAddress=1.64.16.172, Neig
hborEvent=1-Way, NeighborPreviousState=Full, NeighborCurrentState=Init)
[r2-GigabitEthernet0/0/0]
Jan 21 2022 17:42:39-08:00 r2 %%01OSPF/4/NBR_CHANGE_E(l)[10]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=1.64.16.172, Nei
ghborEvent=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=ExStar
t)
[r2-GigabitEthernet0/0/0]
Jan 21 2022 17:42:39-08:00 r2 %%01OSPF/4/NBR_CHANGE_E(l)[11]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=1.64.16.172, Nei
ghborEvent=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=
Exchange)
[r2-GigabitEthernet0/0/0]
Jan 21 2022 17:42:39-08:00 r2 %%01OSPF/4/NBR_CHANGE_E(l)[12]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=1.64.16.172, Nei
ghborEvent=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Lo
ading)
[r2-GigabitEthernet0/0/0]
Jan 21 2022 17:42:39-08:00 r2 %%01OSPF/4/NBR_CHANGE_E(l)[13]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=1.64.16.172, Nei
ghborEvent=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full
)
R3
<Huawei>system-view
Enter system view, return user view with Ctrl+Z.
[Huawei]sy
[Huawei]sysname r3
[r3]int
[r3]interface g0/0/0
[r3-GigabitEthernet0/0/0]ip ad
[r3-GigabitEthernet0/0/0]ip address 172.16.96.2 20
Jan 21 2022 17:05:34-08:00 r3 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP
on the interface GigabitEthernet0/0/0 has entered the UP state.
[r3-GigabitEthernet0/0/0]qu
[r3-GigabitEthernet0/0/0]quit
[r3]int
[r3]interface g0/0/1
[r3-GigabitEthernet0/0/1]ip ad
[r3-GigabitEthernet0/0/1]ip address 172.16.0.3 19
[r3-GigabitEthernet0/0/1]
Jan 21 2022 17:06:44-08:00 r3 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP
on the interface GigabitEthernet0/0/1 has entered the UP state.
[r3-GigabitEthernet0/0/1]qu
[r3-GigabitEthernet0/0/1]quit
[r3]int
[r3]interface l
[r3]interface LoopBack 0
[r3-LoopBack0]ip ad
[r3-LoopBack0]ip address 172.16.32.1 19
[r3-LoopBack0]
Please check whether system data has been changed, and save data in time
Configuration console time out, please press any key to log on
<r3>y
<r3>sy
<r3>system-view
Enter system view, return user view with Ctrl+Z.
[r3]os
[r3]ospf 100 r
[r3]ospf 100 router-id 3.3.3.3
[r3-ospf-100]ar
[r3-ospf-100]area 1
[r3-ospf-100-area-0.0.0.1]ne
[r3-ospf-100-area-0.0.0.1]network 172.16.96.2 0.0.0.0
[r3-ospf-100-area-0.0.0.1]qu
[r3-ospf-100-area-0.0.0.1]quit
[r3-ospf-100]
Jan 21 2022 17:20:06-08:00 r3 %%01OSPF/4/NBR_CHANGE_E(l)[0]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=25600, NeighborAddress=1.96.16.172, Neig
hborEvent=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init)
[r3-ospf-100]
Jan 21 2022 17:20:06-08:00 r3 %%01OSPF/4/NBR_CHANGE_E(l)[1]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=25600, NeighborAddress=1.96.16.172, Neig
hborEvent=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=2Way)
[r3-ospf-100]
Jan 21 2022 17:20:06-08:00 r3 %%01OSPF/4/NBR_CHANGE_E(l)[2]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=25600, NeighborAddress=1.96.16.172, Neig
hborEvent=AdjOk?, NeighborPreviousState=2Way, NeighborCurrentState=ExStart)
[r3-ospf-100]
Jan 21 2022 17:20:06-08:00 r3 %%01OSPF/4/NBR_CHANGE_E(l)[3]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=25600, NeighborAddress=1.96.16.172, Neig
hborEvent=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=E
xchange)
[r3-ospf-100]
Jan 21 2022 17:20:06-08:00 r3 %%01OSPF/4/NBR_CHANGE_E(l)[4]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=25600, NeighborAddress=1.96.16.172, Neig
hborEvent=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Loa
ding)
[r3-ospf-100]
Jan 21 2022 17:20:06-08:00 r3 %%01OSPF/4/NBR_CHANGE_E(l)[5]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=25600, NeighborAddress=1.96.16.172, Neig
hborEvent=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full)
[r3-ospf-100]ar
[r3-ospf-100]area 0
[r3-ospf-100-area-0.0.0.0]ne
[r3-ospf-100-area-0.0.0.0]network 172.16.0.3 0.0.0.0
[r3-ospf-100-area-0.0.0.0]ne
[r3-ospf-100-area-0.0.0.0]network 172.16.32.1 0.0.0.0
[r3-ospf-100-area-0.0.0.0]
Jan 21 2022 17:21:43-08:00 r3 %%01OSPF/4/NBR_CHANGE_E(l)[6]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=25600, NeighborAddress=4.0.16.172, Neigh
borEvent=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init)
[r3-ospf-100-area-0.0.0.0]
Jan 21 2022 17:21:49-08:00 r3 %%01OSPF/4/NBR_CHANGE_E(l)[7]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=25600, NeighborAddress=4.0.16.172, Neigh
borEvent=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=ExStart)
[r3-ospf-100-area-0.0.0.0]
Jan 21 2022 17:21:49-08:00 r3 %%01OSPF/4/NBR_CHANGE_E(l)[8]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=25600, NeighborAddress=4.0.16.172, Neigh
borEvent=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=Ex
change)
[r3-ospf-100-area-0.0.0.0]
Jan 21 2022 17:21:49-08:00 r3 %%01OSPF/4/NBR_CHANGE_E(l)[9]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=25600, NeighborAddress=4.0.16.172, Neigh
borEvent=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Load
ing)
[r3-ospf-100-area-0.0.0.0]
Jan 21 2022 17:21:49-08:00 r3 %%01OSPF/4/NBR_CHANGE_E(l)[10]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=4.0.16.172, Neig
hborEvent=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full)
[r3-ospf-100-area-0.0.0.0]
Jan 21 2022 17:23:11-08:00 r3 %%01OSPF/4/NBR_CHANGE_E(l)[11]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=5.0.16.172, Neig
hborEvent=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init)
[r3-ospf-100-area-0.0.0.0]
Jan 21 2022 17:23:15-08:00 r3 %%01OSPF/4/NBR_CHANGE_E(l)[12]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=5.0.16.172, Neig
hborEvent=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=ExStart
)
[r3-ospf-100-area-0.0.0.0]
Jan 21 2022 17:23:15-08:00 r3 %%01OSPF/4/NBR_CHANGE_E(l)[13]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=5.0.16.172, Neig
hborEvent=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=E
xchange)
[r3-ospf-100-area-0.0.0.0]
Jan 21 2022 17:23:15-08:00 r3 %%01OSPF/4/NBR_CHANGE_E(l)[14]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=5.0.16.172, Neig
hborEvent=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Loa
ding)
[r3-ospf-100-area-0.0.0.0]
Jan 21 2022 17:23:15-08:00 r3 %%01OSPF/4/NBR_CHANGE_E(l)[15]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=5.0.16.172, Neig
hborEvent=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full)
[r3-ospf-100-area-0.0.0.0]
Please check whether system data has been changed, and save data in time
Configuration console time out, please press any key to log on
<r3>sy
<r3>system-view
Enter system view, return user view with Ctrl+Z.
[r3]\int
[r3]int
[r3]interface g0/0/0
[r3-GigabitEthernet0/0/0]os
[r3-GigabitEthernet0/0/0]ospf a
[r3-GigabitEthernet0/0/0]ospf authentication-mode s
[r3-GigabitEthernet0/0/0]ospf authentication-mode simple c
[r3-GigabitEthernet0/0/0]ospf authentication-mode simple cipher 123
[r3-GigabitEthernet0/0/0]
Jan 21 2022 17:37:45-08:00 r3 %%01OSPF/3/NBR_CHG_DOWN(l)[0]:Neighbor event:neigh
bor state changed to Down. (ProcessId=25600, NeighborAddress=2.2.2.2, NeighborEv
ent=InactivityTimer, NeighborPreviousState=Full, NeighborCurrentState=Down)
[r3-GigabitEthernet0/0/0]
Jan 21 2022 17:37:45-08:00 r3 %%01OSPF/3/NBR_DOWN_REASON(l)[1]:Neighbor state le
aves full or changed to Down. (ProcessId=25600, NeighborRouterId=2.2.2.2, Neighb
orAreaId=16777216, NeighborInterface=GigabitEthernet0/0/0,NeighborDownImmediate
reason=Neighbor Down Due to Inactivity, NeighborDownPrimeReason=Hello Not Seen,
NeighborChangeTime=2022-01-21 17:37:45-08:00)
[r3-GigabitEthernet0/0/0]os
[r3-GigabitEthernet0/0/0]ospf a
[r3-GigabitEthernet0/0/0]ospf authentication-mode m
[r3-GigabitEthernet0/0/0]ospf authentication-mode md5
[r3-GigabitEthernet0/0/0]
Jan 21 2022 17:37:57-08:00 r3 %%01OSPF/4/NBR_CHANGE_E(l)[2]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=25600, NeighborAddress=1.96.16.172, Neig
hborEvent=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init)
[r3-GigabitEthernet0/0/0]
Jan 21 2022 17:38:00-08:00 r3 %%01OSPF/4/NBR_CHANGE_E(l)[3]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=25600, NeighborAddress=1.96.16.172, Neig
hborEvent=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=ExStart
)
[r3-GigabitEthernet0/0/0]
Jan 21 2022 17:38:00-08:00 r3 %%01OSPF/4/NBR_CHANGE_E(l)[4]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=25600, NeighborAddress=1.96.16.172, Neig
hborEvent=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=E
xchange)
[r3-GigabitEthernet0/0/0]
Jan 21 2022 17:38:00-08:00 r3 %%01OSPF/4/NBR_CHANGE_E(l)[5]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=25600, NeighborAddress=1.96.16.172, Neig
hborEvent=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Loa
ding)
[r3-GigabitEthernet0/0/0]
Jan 21 2022 17:38:00-08:00 r3 %%01OSPF/4/NBR_CHANGE_E(l)[6]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=25600, NeighborAddress=1.96.16.172, Neig
hborEvent=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full)
[r3-GigabitEthernet0/0/0]qu
[r3-GigabitEthernet0/0/0]quit
[r3]os
[r3]ospf 100
[r3-ospf-100]are
[r3-ospf-100]area 1
[r3-ospf-100-area-0.0.0.1]a
[r3-ospf-100-area-0.0.0.1]abr-summary
[r3-ospf-100-area-0.0.0.1]arp-ping
[r3-ospf-100-area-0.0.0.1]authentication-mode
[r3-ospf-100-area-0.0.0.1]abr-summary
[r3-ospf-100-area-0.0.0.1]arp-ping
[r3-ospf-100-area-0.0.0.1]authentication-mode s
[r3-ospf-100-area-0.0.0.1]authentication-mode simple
[r3-ospf-100-area-0.0.0.1]authentication-mode simple c
[r3-ospf-100-area-0.0.0.1]authentication-mode simple cipher 123
[r3-ospf-100-area-0.0.0.1]ab
[r3-ospf-100-area-0.0.0.1]abr-summary 172.16.64.0 255.255.192.0
[r3-ospf-100-area-0.0.0.1]
R4
change)
[r4-ospf-100]
Jan 21 2022 17:23:15-08:00 r4 %%01OSPF/4/NBR_CHANGE_E(l)[9]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=25600, NeighborAddress=5.0.16.172, Neigh
borEvent=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Load
ing)
[r4-ospf-100]
Jan 21 2022 17:23:15-08:00 r4 %%01OSPF/4/NBR_CHANGE_E(l)[10]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=5.0.16.172, Neig
hborEvent=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full)
[r4-ospf-100]
Jan 21 2022 17:26:33-08:00 r4 %%01OSPF/4/NBR_CHANGE_E(l)[11]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=2.136.16.172, Ne
ighborEvent=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init
)
[r4-ospf-100]
Jan 21 2022 17:26:42-08:00 r4 %%01OSPF/4/NBR_CHANGE_E(l)[12]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=2.136.16.172, Ne
ighborEvent=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=ExSta
rt)
[r4-ospf-100]
Jan 21 2022 17:26:42-08:00 r4 %%01OSPF/4/NBR_CHANGE_E(l)[13]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=2.136.16.172, Ne
ighborEvent=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState
=Exchange)
[r4-ospf-100]
Jan 21 2022 17:26:42-08:00 r4 %%01OSPF/4/NBR_CHANGE_E(l)[14]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=2.136.16.172, Ne
ighborEvent=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=L
oading)
[r4-ospf-100]
Jan 21 2022 17:26:42-08:00 r4 %%01OSPF/4/NBR_CHANGE_E(l)[15]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=2.136.16.172, Ne
ighborEvent=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Ful
l)
[r4-ospf-100]
Please check whether system data has been changed, and save data in time
Configuration console time out, please press any key to log on
<r4>sy
<r4>system-view
Enter system view, return user view with Ctrl+Z.
[r4]os
[r4]ospf 100
[r4-ospf-100]ar
[r4-ospf-100]are
[r4-ospf-100]area 2
[r4-ospf-100-area-0.0.0.2]undo ne
[r4-ospf-100-area-0.0.0.2]undo network 172.16.128.1 0.0.0.0
[r4-ospf-100-area-0.0.0.2]qu
[r4-ospf-100-area-0.0.0.2]quit
[r4-ospf-100]de
[r4-ospf-100]default
[r4-ospf-100]default-route-advertise a
[r4-ospf-100]default-route-advertise always
[r4-ospf-100]qu
[r4-ospf-100]quit
[r4]int
[r4]interface g0/0/0
[r4-GigabitEthernet0/0/0]os
[r4-GigabitEthernet0/0/0]ospf dr
[r4-GigabitEthernet0/0/0]ospf dr-priority 0
Jan 21 2022 17:33:52-08:00 r4 %%01OSPF/3/NBR_CHG_DOWN(l)[0]:Neighbor event:neigh
bor state changed to Down. (ProcessId=25600, NeighborAddress=3.3.3.3, NeighborEv
ent=KillNbr, NeighborPreviousState=Full, NeighborCurrentState=Down)
[r4-GigabitEthernet0/0/0]
[r4-GigabitEthernet0/0/0]
Jan 21 2022 17:33:52-08:00 r4 %%01OSPF/3/NBR_DOWN_REASON(l)[1]:Neighbor state le
aves full or changed to Down. (ProcessId=25600, NeighborRouterId=3.3.3.3, Neighb
orAreaId=0, NeighborInterface=GigabitEthernet0/0/0,NeighborDownImmediate reason=
Neighbor Down Due to Kill Neighbor, NeighborDownPrimeReason=Interface Parameter
Mismatch, NeighborChangeTime=2022-01-21 17:33:52-08:00)
[r4-GigabitEthernet0/0/0]
Jan 21 2022 17:33:52-08:00 r4 %%01OSPF/3/NBR_CHG_DOWN(l)[2]:Neighbor event:neigh
bor state changed to Down. (ProcessId=25600, NeighborAddress=5.5.5.5, NeighborEv
ent=KillNbr, NeighborPreviousState=Full, NeighborCurrentState=Down)
[r4-GigabitEthernet0/0/0]
Jan 21 2022 17:33:52-08:00 r4 %%01OSPF/3/NBR_DOWN_REASON(l)[3]:Neighbor state le
aves full or changed to Down. (ProcessId=25600, NeighborRouterId=5.5.5.5, Neighb
orAreaId=0, NeighborInterface=GigabitEthernet0/0/0,NeighborDownImmediate reason=
Neighbor Down Due to Kill Neighbor, NeighborDownPrimeReason=Interface Parameter
Mismatch, NeighborChangeTime=2022-01-21 17:33:52-08:00)
[r4-GigabitEthernet0/0/0]
Jan 21 2022 17:33:52-08:00 r4 %%01OSPF/3/NBR_CHG_DOWN(l)[4]:Neighbor event:neigh
bor state changed to Down. (ProcessId=25600, NeighborAddress=6.6.6.6, NeighborEv
ent=KillNbr, NeighborPreviousState=Full, NeighborCurrentState=Down)
[r4-GigabitEthernet0/0/0]
Jan 21 2022 17:33:52-08:00 r4 %%01OSPF/3/NBR_DOWN_REASON(l)[5]:Neighbor state le
aves full or changed to Down. (ProcessId=25600, NeighborRouterId=6.6.6.6, Neighb
orAreaId=0, NeighborInterface=GigabitEthernet0/0/0,NeighborDownImmediate reason=
Neighbor Down Due to Kill Neighbor, NeighborDownPrimeReason=Interface Parameter
Mismatch, NeighborChangeTime=2022-01-21 17:33:52-08:00)
[r4-GigabitEthernet0/0/0]
Jan 21 2022 17:33:53-08:00 r4 %%01OSPF/4/NBR_CHANGE_E(l)[6]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=25600, NeighborAddress=5.0.16.172, Neigh
borEvent=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init)
[r4-GigabitEthernet0/0/0]
Jan 21 2022 17:33:53-08:00 r4 %%01OSPF/4/NBR_CHANGE_E(l)[7]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=25600, NeighborAddress=5.0.16.172, Neigh
borEvent=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=2Way)
[r4-GigabitEthernet0/0/0]
Jan 21 2022 17:33:53-08:00 r4 %%01OSPF/4/NBR_CHANGE_E(l)[8]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=25600, NeighborAddress=5.0.16.172, Neigh
borEvent=AdjOk?, NeighborPreviousState=2Way, NeighborCurrentState=ExStart)
[r4-GigabitEthernet0/0/0]
Jan 21 2022 17:33:54-08:00 r4 %%01OSPF/4/NBR_CHANGE_E(l)[9]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=25600, NeighborAddress=3.0.16.172, Neigh
borEvent=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init)
[r4-GigabitEthernet0/0/0]
Jan 21 2022 17:33:54-08:00 r4 %%01OSPF/4/NBR_CHANGE_E(l)[10]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=3.0.16.172, Neig
hborEvent=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=2Way)
[r4-GigabitEthernet0/0/0]
Jan 21 2022 17:33:54-08:00 r4 %%01OSPF/4/NBR_CHANGE_E(l)[11]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=3.0.16.172, Neig
hborEvent=AdjOk?, NeighborPreviousState=2Way, NeighborCurrentState=ExStart)
[r4-GigabitEthernet0/0/0]
Jan 21 2022 17:33:54-08:00 r4 %%01OSPF/4/NBR_CHANGE_E(l)[12]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=3.0.16.172, Neig
hborEvent=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=E
xchange)
[r4-GigabitEthernet0/0/0]
Jan 21 2022 17:33:54-08:00 r4 %%01OSPF/4/NBR_CHANGE_E(l)[13]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=3.0.16.172, Neig
hborEvent=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Loa
ding)
[r4-GigabitEthernet0/0/0]
Jan 21 2022 17:33:54-08:00 r4 %%01OSPF/4/NBR_CHANGE_E(l)[14]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=3.0.16.172, Neig
hborEvent=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full)
[r4-GigabitEthernet0/0/0]
Jan 21 2022 17:33:56-08:00 r4 %%01OSPF/4/NBR_CHANGE_E(l)[15]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=6.0.16.172, Neig
hborEvent=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init)
[r4-GigabitEthernet0/0/0]
Jan 21 2022 17:33:56-08:00 r4 %%01OSPF/4/NBR_CHANGE_E(l)[16]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=6.0.16.172, Neig
hborEvent=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=2Way)
[r4-GigabitEthernet0/0/0]
Jan 21 2022 17:33:56-08:00 r4 %%01OSPF/4/NBR_CHANGE_E(l)[17]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=5.0.16.172, Neig
hborEvent=AdjOk?, NeighborPreviousState=ExStart, NeighborCurrentState=2Way)
[r4-GigabitEthernet0/0/0]
Jan 21 2022 17:33:56-08:00 r4 %%01OSPF/4/NBR_CHANGE_E(l)[18]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=6.0.16.172, Neig
hborEvent=AdjOk?, NeighborPreviousState=2Way, NeighborCurrentState=ExStart)
[r4-GigabitEthernet0/0/0]
Jan 21 2022 17:33:56-08:00 r4 %%01OSPF/4/NBR_CHANGE_E(l)[19]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=6.0.16.172, Neig
hborEvent=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=E
xchange)
[r4-GigabitEthernet0/0/0]
Jan 21 2022 17:33:56-08:00 r4 %%01OSPF/4/NBR_CHANGE_E(l)[20]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=6.0.16.172, Neig
hborEvent=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Loa
ding)
[r4-GigabitEthernet0/0/0]
Jan 21 2022 17:33:56-08:00 r4 %%01OSPF/4/NBR_CHANGE_E(l)[21]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=6.0.16.172, Neig
hborEvent=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full)
[r4-GigabitEthernet0/0/0]
Jan 21 2022 17:34:30-08:00 r4 %%01OSPF/4/NBR_CHANGE_E(l)[22]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=5.0.16.172, Neig
hborEvent=1-Way, NeighborPreviousState=2Way, NeighborCurrentState=Init)
[r4-GigabitEthernet0/0/0]
Jan 21 2022 17:34:41-08:00 r4 %%01OSPF/4/NBR_CHANGE_E(l)[23]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=5.0.16.172, Neig
hborEvent=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=2Way)
[r4-GigabitEthernet0/0/0]
Jan 21 2022 17:34:41-08:00 r4 %%01OSPF/4/NBR_CHANGE_E(l)[24]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=5.0.16.172, Neig
hborEvent=AdjOk?, NeighborPreviousState=2Way, NeighborCurrentState=2Way)
[r4-GigabitEthernet0/0/0]
Jan 21 2022 17:34:44-08:00 r4 %%01OSPF/3/NBR_DOWN_REASON(l)[25]:Neighbor state l
eaves full or changed to Down. (ProcessId=25600, NeighborRouterId=6.6.6.6, Neigh
borAreaId=0, NeighborInterface=GigabitEthernet0/0/0,NeighborDownImmediate reason
=Neighbor Down Due to 1-Wayhello Received, NeighborDownPrimeReason=1-Wayhello Re
ceived, NeighborChangeTime=2022-01-21 17:34:44-08:00)
[r4-GigabitEthernet0/0/0]
Jan 21 2022 17:34:44-08:00 r4 %%01OSPF/4/NBR_CHANGE_E(l)[26]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=6.0.16.172, Neig
hborEvent=1-Way, NeighborPreviousState=Full, NeighborCurrentState=Init)
[r4-GigabitEthernet0/0/0]
Jan 21 2022 17:34:44-08:00 r4 %%01OSPF/4/NBR_CHANGE_E(l)[27]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=5.0.16.172, Neig
hborEvent=AdjOk?, NeighborPreviousState=2Way, NeighborCurrentState=2Way)
[r4-GigabitEthernet0/0/0]
Jan 21 2022 17:34:54-08:00 r4 %%01OSPF/4/NBR_CHANGE_E(l)[28]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=6.0.16.172, Neig
hborEvent=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=2Way)
[r4-GigabitEthernet0/0/0]
Jan 21 2022 17:34:54-08:00 r4 %%01OSPF/4/NBR_CHANGE_E(l)[29]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=5.0.16.172, Neig
hborEvent=AdjOk?, NeighborPreviousState=2Way, NeighborCurrentState=2Way)
[r4-GigabitEthernet0/0/0]
Jan 21 2022 17:34:54-08:00 r4 %%01OSPF/4/NBR_CHANGE_E(l)[30]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=6.0.16.172, Neig
hborEvent=AdjOk?, NeighborPreviousState=2Way, NeighborCurrentState=2Way)
[r4-GigabitEthernet0/0/0]
Please check whether system data has been changed, and save data in time
Configuration console time out, please press any key to log on
<r4>sy
<r4>system-view
<r4>system-view
Enter system view, return user view with Ctrl+Z.
[r4]os
[r4]ospf 100
[r4-ospf-100]are
[r4-ospf-100]area 2
[r4-ospf-100-area-0.0.0.2]a
[r4-ospf-100-area-0.0.0.2]abr-summary
[r4-ospf-100-area-0.0.0.2]arp-ping
[r4-ospf-100-area-0.0.0.2]authentication-mode s
[r4-ospf-100-area-0.0.0.2]authentication-mode simple c
[r4-ospf-100-area-0.0.0.2]authentication-mode simple cipher 123
[r4-ospf-100-area-0.0.0.2]a
[r4-ospf-100-area-0.0.0.2]abr-summary
[r4-ospf-100-area-0.0.0.2]arp-ping
[r4-ospf-100-area-0.0.0.2]authentication-mode m
[r4-ospf-100-area-0.0.0.2]authentication-mode md5
[r4-ospf-100-area-0.0.0.2]
R5
[r5-ospf-100]
Jan 21 2022 17:28:06-08:00 r5 %%01OSPF/4/NBR_CHANGE_E(l)[23]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=2.152.16.172, Ne
ighborEvent=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState
=Exchange)
[r5-ospf-100]
Jan 21 2022 17:28:06-08:00 r5 %%01OSPF/4/NBR_CHANGE_E(l)[24]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=2.152.16.172, Ne
ighborEvent=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=L
oading)
[r5-ospf-100]
Jan 21 2022 17:28:06-08:00 r5 %%01OSPF/4/NBR_CHANGE_E(l)[25]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=2.152.16.172, Ne
ighborEvent=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Ful
l)
[r5-ospf-100]
Please check whether system data has been changed, and save data in time
Configuration console time out, please press any key to log on
<r5>y
<r5>sy
<r5>system-view
Enter system view, return user view with Ctrl+Z.
[r5]int
[r5]interface g0/0/0
[r5-GigabitEthernet0/0/0]os
[r5-GigabitEthernet0/0/0]ospf dr
[r5-GigabitEthernet0/0/0]ospf dr-priority 0
Jan 21 2022 17:34:30-08:00 r5 %%01OSPF/3/NBR_CHG_DOWN(l)[0]:Neighbor event:neigh
bor state changed to Down. (ProcessId=25600, NeighborAddress=3.3.3.3, NeighborEv
ent=KillNbr, NeighborPreviousState=Full, NeighborCurrentState=Down)
[r5-GigabitEthernet0/0/0]
[r5-GigabitEthernet0/0/0]
Jan 21 2022 17:34:30-08:00 r5 %%01OSPF/3/NBR_DOWN_REASON(l)[1]:Neighbor state le
aves full or changed to Down. (ProcessId=25600, NeighborRouterId=3.3.3.3, Neighb
orAreaId=0, NeighborInterface=GigabitEthernet0/0/0,NeighborDownImmediate reason=
Neighbor Down Due to Kill Neighbor, NeighborDownPrimeReason=Interface Parameter
Mismatch, NeighborChangeTime=2022-01-21 17:34:30-08:00)
[r5-GigabitEthernet0/0/0]
Jan 21 2022 17:34:30-08:00 r5 %%01OSPF/3/NBR_CHG_DOWN(l)[2]:Neighbor event:neigh
bor state changed to Down. (ProcessId=25600, NeighborAddress=4.4.4.4, NeighborEv
ent=KillNbr, NeighborPreviousState=2Way, NeighborCurrentState=Down)
[r5-GigabitEthernet0/0/0]
Jan 21 2022 17:34:30-08:00 r5 %%01OSPF/3/NBR_DOWN_REASON(l)[3]:Neighbor state le
aves full or changed to Down. (ProcessId=25600, NeighborRouterId=4.4.4.4, Neighb
orAreaId=0, NeighborInterface=GigabitEthernet0/0/0,NeighborDownImmediate reason=
Neighbor Down Due to Kill Neighbor, NeighborDownPrimeReason=Interface Parameter
Mismatch, NeighborChangeTime=2022-01-21 17:34:30-08:00)
[r5-GigabitEthernet0/0/0]
Jan 21 2022 17:34:30-08:00 r5 %%01OSPF/3/NBR_CHG_DOWN(l)[4]:Neighbor event:neigh
bor state changed to Down. (ProcessId=25600, NeighborAddress=6.6.6.6, NeighborEv
ent=KillNbr, NeighborPreviousState=Full, NeighborCurrentState=Down)
[r5-GigabitEthernet0/0/0]
Jan 21 2022 17:34:30-08:00 r5 %%01OSPF/3/NBR_DOWN_REASON(l)[5]:Neighbor state le
aves full or changed to Down. (ProcessId=25600, NeighborRouterId=6.6.6.6, Neighb
orAreaId=0, NeighborInterface=GigabitEthernet0/0/0,NeighborDownImmediate reason=
Neighbor Down Due to Kill Neighbor, NeighborDownPrimeReason=Interface Parameter
Mismatch, NeighborChangeTime=2022-01-21 17:34:30-08:00)
[r5-GigabitEthernet0/0/0]
Jan 21 2022 17:34:31-08:00 r5 %%01OSPF/4/NBR_CHANGE_E(l)[6]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=25600, NeighborAddress=4.0.16.172, Neigh
borEvent=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init)
[r5-GigabitEthernet0/0/0]
Jan 21 2022 17:34:31-08:00 r5 %%01OSPF/4/NBR_CHANGE_E(l)[7]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=25600, NeighborAddress=4.0.16.172, Neigh
borEvent=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=2Way)
[r5-GigabitEthernet0/0/0]
Jan 21 2022 17:34:31-08:00 r5 %%01OSPF/4/NBR_CHANGE_E(l)[8]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=25600, NeighborAddress=4.0.16.172, Neigh
borEvent=AdjOk?, NeighborPreviousState=2Way, NeighborCurrentState=2Way)
[r5-GigabitEthernet0/0/0]
Jan 21 2022 17:34:32-08:00 r5 %%01OSPF/4/NBR_CHANGE_E(l)[9]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=25600, NeighborAddress=6.0.16.172, Neigh
borEvent=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init)
[r5-GigabitEthernet0/0/0]
Jan 21 2022 17:34:32-08:00 r5 %%01OSPF/4/NBR_CHANGE_E(l)[10]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=6.0.16.172, Neig
hborEvent=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=2Way)
[r5-GigabitEthernet0/0/0]
Jan 21 2022 17:34:32-08:00 r5 %%01OSPF/4/NBR_CHANGE_E(l)[11]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=4.0.16.172, Neig
hborEvent=AdjOk?, NeighborPreviousState=2Way, NeighborCurrentState=2Way)
[r5-GigabitEthernet0/0/0]
Jan 21 2022 17:34:32-08:00 r5 %%01OSPF/4/NBR_CHANGE_E(l)[12]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=6.0.16.172, Neig
hborEvent=AdjOk?, NeighborPreviousState=2Way, NeighborCurrentState=ExStart)
[r5-GigabitEthernet0/0/0]
Jan 21 2022 17:34:32-08:00 r5 %%01OSPF/4/NBR_CHANGE_E(l)[13]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=6.0.16.172, Neig
hborEvent=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=E
xchange)
[r5-GigabitEthernet0/0/0]
Jan 21 2022 17:34:32-08:00 r5 %%01OSPF/4/NBR_CHANGE_E(l)[14]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=6.0.16.172, Neig
hborEvent=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Loa
ding)
[r5-GigabitEthernet0/0/0]
Jan 21 2022 17:34:32-08:00 r5 %%01OSPF/4/NBR_CHANGE_E(l)[15]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=6.0.16.172, Neig
hborEvent=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full)
[r5-GigabitEthernet0/0/0]
Jan 21 2022 17:34:37-08:00 r5 %%01OSPF/4/NBR_CHANGE_E(l)[16]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=3.0.16.172, Neig
hborEvent=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init)
[r5-GigabitEthernet0/0/0]
Jan 21 2022 17:34:37-08:00 r5 %%01OSPF/4/NBR_CHANGE_E(l)[17]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=3.0.16.172, Neig
hborEvent=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=2Way)
[r5-GigabitEthernet0/0/0]
Jan 21 2022 17:34:37-08:00 r5 %%01OSPF/4/NBR_CHANGE_E(l)[18]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=3.0.16.172, Neig
hborEvent=AdjOk?, NeighborPreviousState=2Way, NeighborCurrentState=ExStart)
[r5-GigabitEthernet0/0/0]
Jan 21 2022 17:34:37-08:00 r5 %%01OSPF/4/NBR_CHANGE_E(l)[19]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=4.0.16.172, Neig
hborEvent=AdjOk?, NeighborPreviousState=2Way, NeighborCurrentState=2Way)
[r5-GigabitEthernet0/0/0]
Jan 21 2022 17:34:37-08:00 r5 %%01OSPF/4/NBR_CHANGE_E(l)[20]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=3.0.16.172, Neig
hborEvent=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=E
xchange)
[r5-GigabitEthernet0/0/0]
Jan 21 2022 17:34:37-08:00 r5 %%01OSPF/4/NBR_CHANGE_E(l)[21]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=3.0.16.172, Neig
hborEvent=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Loa
ding)
[r5-GigabitEthernet0/0/0]
Jan 21 2022 17:34:37-08:00 r5 %%01OSPF/4/NBR_CHANGE_E(l)[22]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=3.0.16.172, Neig
hborEvent=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full)
[r5-GigabitEthernet0/0/0]
Jan 21 2022 17:34:44-08:00 r5 %%01OSPF/3/NBR_DOWN_REASON(l)[23]:Neighbor state l
eaves full or changed to Down. (ProcessId=25600, NeighborRouterId=6.6.6.6, Neigh
borAreaId=0, NeighborInterface=GigabitEthernet0/0/0,NeighborDownImmediate reason
=Neighbor Down Due to 1-Wayhello Received, NeighborDownPrimeReason=1-Wayhello Re
ceived, NeighborChangeTime=2022-01-21 17:34:44-08:00)
[r5-GigabitEthernet0/0/0]
Jan 21 2022 17:34:44-08:00 r5 %%01OSPF/4/NBR_CHANGE_E(l)[24]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=6.0.16.172, Neig
hborEvent=1-Way, NeighborPreviousState=Full, NeighborCurrentState=Init)
[r5-GigabitEthernet0/0/0]
Jan 21 2022 17:34:44-08:00 r5 %%01OSPF/4/NBR_CHANGE_E(l)[25]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=4.0.16.172, Neig
hborEvent=AdjOk?, NeighborPreviousState=2Way, NeighborCurrentState=2Way)
[r5-GigabitEthernet0/0/0]
Jan 21 2022 17:34:54-08:00 r5 %%01OSPF/4/NBR_CHANGE_E(l)[26]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=6.0.16.172, Neig
hborEvent=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=2Way)
[r5-GigabitEthernet0/0/0]
Jan 21 2022 17:34:54-08:00 r5 %%01OSPF/4/NBR_CHANGE_E(l)[27]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=4.0.16.172, Neig
hborEvent=AdjOk?, NeighborPreviousState=2Way, NeighborCurrentState=2Way)
[r5-GigabitEthernet0/0/0]
Jan 21 2022 17:34:54-08:00 r5 %%01OSPF/4/NBR_CHANGE_E(l)[28]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=6.0.16.172, Neig
hborEvent=AdjOk?, NeighborPreviousState=2Way, NeighborCurrentState=2Way)
[r5-GigabitEthernet0/0/0]
Please check whether system data has been changed, and save data in time
Configuration console time out, please press any key to log on
<r5>sy
<r5>system-view
Enter system view, return user view with Ctrl+Z.
[r5]os
[r5]ospf 100
[r5-ospf-100]are
[r5-ospf-100]area 2
[r5-ospf-100-area-0.0.0.2]a
[r5-ospf-100-area-0.0.0.2]abr-summary
[r5-ospf-100-area-0.0.0.2]arp-ping
[r5-ospf-100-area-0.0.0.2]authentication-mode s
[r5-ospf-100-area-0.0.0.2]authentication-mode simple c
[r5-ospf-100-area-0.0.0.2]authentication-mode simple cipher
[r5-ospf-100-area-0.0.0.2]authentication-mode simple cipher 123
[r5-ospf-100-area-0.0.0.2]au
[r5-ospf-100-area-0.0.0.2]authentication-mode m
[r5-ospf-100-area-0.0.0.2]authentication-mode md5
[r5-ospf-100-area-0.0.0.2]
Jan 21 2022 17:41:25-08:00 r5 %%01OSPF/3/NBR_DOWN_REASON(l)[0]:Neighbor state le
aves full or changed to Down. (ProcessId=25600, NeighborRouterId=6.6.6.6, Neighb
orAreaId=33554432, NeighborInterface=GigabitEthernet0/0/1,NeighborDownImmediate
reason=Neighbor Down Due to SequenceNum Mismatch, NeighborDownPrimeReason=M,I,MS
bit or SequenceNum Incorrect, NeighborChangeTime=2022-01-21 17:41:25-08:00)
[r5-ospf-100-area-0.0.0.2]
Jan 21 2022 17:41:25-08:00 r5 %%01OSPF/4/NBR_CHANGE_E(l)[1]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=25600, NeighborAddress=2.152.16.172, Nei
ghborEvent=SeqNumberMismatch, NeighborPreviousState=Full, NeighborCurrentState=E
xStart)
[r5-ospf-100-area-0.0.0.2]
Jan 21 2022 17:41:29-08:00 r5 %%01OSPF/4/NBR_CHANGE_E(l)[2]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=25600, NeighborAddress=2.152.16.172, Nei
ghborEvent=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=
Exchange)
[r5-ospf-100-area-0.0.0.2]
Jan 21 2022 17:41:29-08:00 r5 %%01OSPF/4/NBR_CHANGE_E(l)[3]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=25600, NeighborAddress=2.152.16.172, Nei
ghborEvent=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Lo
ading)
[r5-ospf-100-area-0.0.0.2]
Jan 21 2022 17:41:29-08:00 r5 %%01OSPF/4/NBR_CHANGE_E(l)[4]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=25600, NeighborAddress=2.152.16.172, Nei
ghborEvent=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full
)
[r5-ospf-100-area-0.0.0.2]
Please check whether system data has been changed, and save data in time
Configuration console time out, please press any key to log on
<r5>sy
<r5>system-view
Enter system view, return user view with Ctrl+Z.
[r5]os
[r5]ospf 100
[r5-ospf-100]are
[r5-ospf-100]area 2
[r5-ospf-100-area-0.0.0.2]ab
[r5-ospf-100-area-0.0.0.2]abr-summary 172.16.144.0 255.255.240.0
[r5-ospf-100-area-0.0.0.2]
R6
borEvent=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=Ex
change)
[r6-ospf-100-area-0.0.0.0]
Jan 21 2022 17:27:42-08:00 r6 %%01OSPF/4/NBR_CHANGE_E(l)[10]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=3.0.16.172, Neig
hborEvent=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Loa
ding)
[r6-ospf-100-area-0.0.0.0]
Jan 21 2022 17:27:42-08:00 r6 %%01OSPF/4/NBR_CHANGE_E(l)[11]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=3.0.16.172, Neig
hborEvent=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full)
[r6-ospf-100-area-0.0.0.0]qu
[r6-ospf-100-area-0.0.0.0]quit
[r6-ospf-100]ar
[r6-ospf-100]area 2
[r6-ospf-100-area-0.0.0.2]
Jan 21 2022 17:27:47-08:00 r6 %%01OSPF/4/NBR_CHANGE_E(l)[12]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=5.0.16.172, Neig
hborEvent=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init)
[r6-ospf-100-area-0.0.0.2]
Jan 21 2022 17:27:47-08:00 r6 %%01OSPF/4/NBR_CHANGE_E(l)[13]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=5.0.16.172, Neig
hborEvent=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=2Way)
[r6-ospf-100-area-0.0.0.2]
Jan 21 2022 17:27:47-08:00 r6 %%01OSPF/4/NBR_CHANGE_E(l)[14]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=5.0.16.172, Neig
hborEvent=AdjOk?, NeighborPreviousState=2Way, NeighborCurrentState=2Way)
[r6-ospf-100-area-0.0.0.2]ne
[r6-ospf-100-area-0.0.0.2]network 172.16.152.2 0.0.0.0
[r6-ospf-100-area-0.0.0.2]ne
[r6-ospf-100-area-0.0.0.2]network
Jan 21 2022 17:28:07-08:00 r6 %%01OSPF/4/NBR_CHANGE_E(l)[15]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=1.152.16.172, Ne
ighborEvent=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init
)
[r6-ospf-100-area-0.0.0.2]network
Jan 21 2022 17:28:07-08:00 r6 %%01OSPF/4/NBR_CHANGE_E(l)[16]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=1.152.16.172, Ne
ighborEvent=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=2Way)
[r6-ospf-100-area-0.0.0.2]network
Jan 21 2022 17:28:07-08:00 r6 %%01OSPF/4/NBR_CHANGE_E(l)[17]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=1.152.16.172, Ne
ighborEvent=AdjOk?, NeighborPreviousState=2Way, NeighborCurrentState=ExStart)
[r6-ospf-100-area-0.0.0.2]network
Jan 21 2022 17:28:07-08:00 r6 %%01OSPF/4/NBR_CHANGE_E(l)[18]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=1.152.16.172, Ne
ighborEvent=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState
=Exchange)
[r6-ospf-100-area-0.0.0.2]network
Jan 21 2022 17:28:07-08:00 r6 %%01OSPF/4/NBR_CHANGE_E(l)[19]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=1.152.16.172, Ne
ighborEvent=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=L
oading)
[r6-ospf-100-area-0.0.0.2]network
Jan 21 2022 17:28:07-08:00 r6 %%01OSPF/4/NBR_CHANGE_E(l)[20]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=1.152.16.172, Ne
ighborEvent=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Ful
l)
[r6-ospf-100-area-0.0.0.2]network 172.16.160.1 0.0.0.0
[r6-ospf-100-area-0.0.0.2]
Please check whether system data has been changed, and save data in time
Configuration console time out, please press any key to log on
<r6>
Jan 21 2022 17:34:33-08:00 r6 %%01OSPF/4/NBR_CHANGE_E(l)[0]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=25600, NeighborAddress=5.0.16.172, Neigh
borEvent=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=Ex
change)
<r6>
Jan 21 2022 17:34:33-08:00 r6 %%01OSPF/4/NBR_CHANGE_E(l)[1]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=25600, NeighborAddress=5.0.16.172, Neigh
borEvent=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Load
ing)
<r6>
Jan 21 2022 17:34:33-08:00 r6 %%01OSPF/4/NBR_CHANGE_E(l)[2]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=25600, NeighborAddress=5.0.16.172, Neigh
borEvent=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full)
<r6>sy
<r6>system-view
Enter system view, return user view with Ctrl+Z.
[r6]int
[r6]interface g0/0/0
[r6-GigabitEthernet0/0/0]os
[r6-GigabitEthernet0/0/0]ospf dr
[r6-GigabitEthernet0/0/0]ospf dr-priority 0
Jan 21 2022 17:34:45-08:00 r6 %%01OSPF/3/NBR_CHG_DOWN(l)[3]:Neighbor event:neigh
bor state changed to Down. (ProcessId=25600, NeighborAddress=3.3.3.3, NeighborEv
ent=KillNbr, NeighborPreviousState=Full, NeighborCurrentState=Down)
[r6-GigabitEthernet0/0/0]
[r6-GigabitEthernet0/0/0]
Jan 21 2022 17:34:45-08:00 r6 %%01OSPF/3/NBR_DOWN_REASON(l)[4]:Neighbor state le
aves full or changed to Down. (ProcessId=25600, NeighborRouterId=3.3.3.3, Neighb
orAreaId=0, NeighborInterface=GigabitEthernet0/0/0,NeighborDownImmediate reason=
Neighbor Down Due to Kill Neighbor, NeighborDownPrimeReason=Interface Parameter
Mismatch, NeighborChangeTime=2022-01-21 17:34:45-08:00)
[r6-GigabitEthernet0/0/0]
Jan 21 2022 17:34:45-08:00 r6 %%01OSPF/3/NBR_CHG_DOWN(l)[5]:Neighbor event:neigh
bor state changed to Down. (ProcessId=25600, NeighborAddress=4.4.4.4, NeighborEv
ent=KillNbr, NeighborPreviousState=Full, NeighborCurrentState=Down)
[r6-GigabitEthernet0/0/0]
Jan 21 2022 17:34:45-08:00 r6 %%01OSPF/3/NBR_DOWN_REASON(l)[6]:Neighbor state le
aves full or changed to Down. (ProcessId=25600, NeighborRouterId=4.4.4.4, Neighb
orAreaId=0, NeighborInterface=GigabitEthernet0/0/0,NeighborDownImmediate reason=
Neighbor Down Due to Kill Neighbor, NeighborDownPrimeReason=Interface Parameter
Mismatch, NeighborChangeTime=2022-01-21 17:34:45-08:00)
[r6-GigabitEthernet0/0/0]
Jan 21 2022 17:34:45-08:00 r6 %%01OSPF/3/NBR_CHG_DOWN(l)[7]:Neighbor event:neigh
bor state changed to Down. (ProcessId=25600, NeighborAddress=5.5.5.5, NeighborEv
ent=KillNbr, NeighborPreviousState=Full, NeighborCurrentState=Down)
[r6-GigabitEthernet0/0/0]
Jan 21 2022 17:34:45-08:00 r6 %%01OSPF/3/NBR_DOWN_REASON(l)[8]:Neighbor state le
aves full or changed to Down. (ProcessId=25600, NeighborRouterId=5.5.5.5, Neighb
orAreaId=0, NeighborInterface=GigabitEthernet0/0/0,NeighborDownImmediate reason=
Neighbor Down Due to Kill Neighbor, NeighborDownPrimeReason=Interface Parameter
Mismatch, NeighborChangeTime=2022-01-21 17:34:45-08:00)
[r6-GigabitEthernet0/0/0]
Jan 21 2022 17:34:48-08:00 r6 %%01OSPF/4/NBR_CHANGE_E(l)[9]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=25600, NeighborAddress=3.0.16.172, Neigh
borEvent=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init)
[r6-GigabitEthernet0/0/0]
Jan 21 2022 17:34:48-08:00 r6 %%01OSPF/4/NBR_CHANGE_E(l)[10]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=3.0.16.172, Neig
hborEvent=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=2Way)
[r6-GigabitEthernet0/0/0]
Jan 21 2022 17:34:48-08:00 r6 %%01OSPF/4/NBR_CHANGE_E(l)[11]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=3.0.16.172, Neig
hborEvent=AdjOk?, NeighborPreviousState=2Way, NeighborCurrentState=ExStart)
[r6-GigabitEthernet0/0/0]
Jan 21 2022 17:34:48-08:00 r6 %%01OSPF/4/NBR_CHANGE_E(l)[12]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=3.0.16.172, Neig
hborEvent=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=E
xchange)
[r6-GigabitEthernet0/0/0]
Jan 21 2022 17:34:48-08:00 r6 %%01OSPF/4/NBR_CHANGE_E(l)[13]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=3.0.16.172, Neig
hborEvent=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Loa
ding)
[r6-GigabitEthernet0/0/0]
Jan 21 2022 17:34:48-08:00 r6 %%01OSPF/4/NBR_CHANGE_E(l)[14]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=3.0.16.172, Neig
hborEvent=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full)
[r6-GigabitEthernet0/0/0]
Jan 21 2022 17:34:51-08:00 r6 %%01OSPF/4/NBR_CHANGE_E(l)[15]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=4.0.16.172, Neig
hborEvent=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init)
[r6-GigabitEthernet0/0/0]
Jan 21 2022 17:34:51-08:00 r6 %%01OSPF/4/NBR_CHANGE_E(l)[16]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=4.0.16.172, Neig
hborEvent=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=2Way)
[r6-GigabitEthernet0/0/0]
Jan 21 2022 17:34:51-08:00 r6 %%01OSPF/4/NBR_CHANGE_E(l)[17]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=4.0.16.172, Neig
hborEvent=AdjOk?, NeighborPreviousState=2Way, NeighborCurrentState=2Way)
[r6-GigabitEthernet0/0/0]
Jan 21 2022 17:34:52-08:00 r6 %%01OSPF/4/NBR_CHANGE_E(l)[18]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=5.0.16.172, Neig
hborEvent=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init)
[r6-GigabitEthernet0/0/0]
Jan 21 2022 17:34:52-08:00 r6 %%01OSPF/4/NBR_CHANGE_E(l)[19]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=5.0.16.172, Neig
hborEvent=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=2Way)
[r6-GigabitEthernet0/0/0]
Jan 21 2022 17:34:52-08:00 r6 %%01OSPF/4/NBR_CHANGE_E(l)[20]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=4.0.16.172, Neig
hborEvent=AdjOk?, NeighborPreviousState=2Way, NeighborCurrentState=2Way)
[r6-GigabitEthernet0/0/0]
Jan 21 2022 17:34:52-08:00 r6 %%01OSPF/4/NBR_CHANGE_E(l)[21]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=25600, NeighborAddress=5.0.16.172, Neig
hborEvent=AdjOk?, NeighborPreviousState=2Way, NeighborCurrentState=2Way)
[r6-GigabitEthernet0/0/0]
Please check whether system data has been changed, and save data in time
Configuration console time out, please press any key to log on
<r6>sy
<r6>system-view
Enter system view, return user view with Ctrl+Z.
[r6]os
[r6]ospf 100
[r6-ospf-100]ar
[r6-ospf-100]arp-ping
[r6-ospf-100]area 2
[r6-ospf-100-area-0.0.0.2]au
[r6-ospf-100-area-0.0.0.2]authentication-mode s
[r6-ospf-100-area-0.0.0.2]authentication-mode simple c
[r6-ospf-100-area-0.0.0.2]authentication-mode simple cipher 123
[r6-ospf-100-area-0.0.0.2]au
[r6-ospf-100-area-0.0.0.2]authentication-mode m
[r6-ospf-100-area-0.0.0.2]authentication-mode md5
[r6-ospf-100-area-0.0.0.2]
Jan 21 2022 17:41:24-08:00 r6 %%01OSPF/3/NBR_CHG_DOWN(l)[0]:Neighbor event:neigh
bor state changed to Down. (ProcessId=25600, NeighborAddress=5.5.5.5, NeighborEv
ent=InactivityTimer, NeighborPreviousState=Full, NeighborCurrentState=Down)
[r6-ospf-100-area-0.0.0.2]
Jan 21 2022 17:41:24-08:00 r6 %%01OSPF/3/NBR_DOWN_REASON(l)[1]:Neighbor state le
aves full or changed to Down. (ProcessId=25600, NeighborRouterId=5.5.5.5, Neighb
orAreaId=33554432, NeighborInterface=GigabitEthernet0/0/1,NeighborDownImmediate
reason=Neighbor Down Due to Inactivity, NeighborDownPrimeReason=Hello Not Seen,
NeighborChangeTime=2022-01-21 17:41:24-08:00)
[r6-ospf-100-area-0.0.0.2]
Jan 21 2022 17:41:26-08:00 r6 %%01OSPF/4/NBR_CHANGE_E(l)[2]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=25600, NeighborAddress=1.152.16.172, Nei
ghborEvent=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init)
[r6-ospf-100-area-0.0.0.2]
Jan 21 2022 17:41:26-08:00 r6 %%01OSPF/4/NBR_CHANGE_E(l)[3]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=25600, NeighborAddress=1.152.16.172, Nei
ghborEvent=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=ExStar
t)
[r6-ospf-100-area-0.0.0.2]
Jan 21 2022 17:41:30-08:00 r6 %%01OSPF/4/NBR_CHANGE_E(l)[4]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=25600, NeighborAddress=1.152.16.172, Nei
ghborEvent=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=
Exchange)
[r6-ospf-100-area-0.0.0.2]
Jan 21 2022 17:41:30-08:00 r6 %%01OSPF/4/NBR_CHANGE_E(l)[5]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=25600, NeighborAddress=1.152.16.172, Nei
ghborEvent=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Lo
ading)
[r6-ospf-100-area-0.0.0.2]
Jan 21 2022 17:41:30-08:00 r6 %%01OSPF/4/NBR_CHANGE_E(l)[6]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=25600, NeighborAddress=1.152.16.172, Nei
ghborEvent=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full
)
[r6-ospf-100-area-0.0.0.2]ab
[r6-ospf-100-area-0.0.0.2]abr-summary 172.16.128.0 255.255.240.0
[r6-ospf-100-area-0.0.0.2]
标签：00,21,OSPF,08,GigabitEthernet0,应用,100,ospf 来源： https://blog.csdn.net/ENVILPRIME/article/details/122626578
本站声明： 1. iCode9 技术分享网（下文简称本站）提供的所有内容，仅供技术学习、探讨和分享； 2. 关于本站的所有留言、评论、转载及引用，纯属内容发起人的个人观点，与本站观点和立场无关； 3. 关于本站的所有言论和文字，纯属内容发起人的个人观点，与本站观点和立场无关； 4. 本站文章均是网友提供，不完全保证技术分享内容的完整性、准确性、时效性、风险性和版权归属；如您发现该文章侵犯了您的权益，可联系我们第一时间进行删除； 5. 本站为非盈利性的个人网站，所有内容不会用来进行牟利，也不会利用任何形式的广告来间接获益，纯粹是为了广大技术爱好者提供技术内容和技术思想的分享性交流网站。