标签：tpg1 ntp iscsi dev server client root

iscsi ntp

1、在iscsi服务端将大小为4G逻辑卷共享给客户端，在客户端系统启动期间，该iscsi设备自动加载。该块设备上包含一个大小为2300MB的分区，文件系统类型为ext4，此分区挂载在/share/disk上。

服务端

1.创建一块新的磁盘，创建大小为4G的逻辑卷

[root@server ~]# pvcreate /dev/sdb1 /dev/sdb2
Physical volume “/dev/sdb1” successfully created.
Physical volume “/dev/sdb2” successfully created.
[root@server ~]# vgcreate vg1 /dev/sdb1 /dev/sdb2
Volume group “vg1” successfully created

[root@server ~]# lvcreate -L 4G -n lv1 vg1
WARNING: ext4 signature detected on /dev/vg1/lv1 at offset 1080. Wipe it? [y/n]: y
Wiping ext4 signature on /dev/vg1/lv1.
Logical volume “lv1” created.

2 装包

关闭防火墙关闭selinux

[root@server ~]# systemctl stop firewalld
[root@server ~]# getenforce
Enforcing
[root@server ~]# setenforce 0

[root@server ~]# yum install -y targetcli
Updating Subscription Management repositories.
Unable to read consumer identity
This system is not registered to Red Hat Subscription Management. You can use subscription-manager to register.
BaseOS 2.7 MB/s | 2.8 kB 00:00
AppStream 3.1 MB/s | 3.2 kB 00:00
软件包 targetcli-2.1.51-1.el8.noarch 已安装。
依赖关系解决。
无需任何处理。
完毕！

3.配置过程

[root@server ~]# targetcli

/> cd /backstores//block

/backstores/block> create dev=/dev/vg1/lv1 name=lun0
Created block storage object lun0 using /dev/vg1/lv1.

/backstores/block> ls /backstores/
o- backstores … […]
o- block … [Storage Objects: 1]
| o- lun0 … [/dev/vg1/lv1 (4.0GiB) write-thru deactivated]
| o- alua … [ALUA Groups: 1]
| o- default_tg_pt_gp … [ALUA state: Active/optimized]
o- fileio … [Storage Objects: 0]
o- pscsi … [Storage Objects: 0]
o- ramdisk … [Storage Objects: 0]
/backstores/block>

设置共享的iscsi target名称及配置共享资源

/iscsi> create
Created target iqn.2003-01.org.linux-iscsi.server.x8664:sn.0f9f01468102.
Created TPG 1.
Global pref auto_add_default_portal=true
Created default portal listening on all IPs (0.0.0.0), port 3260.
/iscsi>

/iscsi> ls /iscsi
o- iscsi … [Targets: 1]
o- iqn.2003-01.org.linux-iscsi.server.x8664:sn.0f9f01468102 …… [TPGs: 1]
o- tpg1 … [no-gen-acls, no-auth]
o- acls … [ACLs: 0]
o- luns … [LUNs: 0]
o- portals … [Portals: 1]
o- 0.0.0.0:3260 … [OK]
/iscsi>

/iscsi> cd /iscsi/iqn.2003-01.org.linux-iscsi.server.x8664:sn.0f9f01468102/tpg1/luns

/iscsi/iqn.20…102/tpg1/luns>create/backstores/block/lun0
Created LUN 0.

/iscsi/iqn.20…102/tpg1/luns> ls
o- luns … [LUNs: 1]
o- lun0 … [block/lun0 (/dev/vg1/lv1) (default_tg_pt_gp)]

关闭账号的认证，关闭自动生成结点

/iscsi/iqn.20…102/tpg1/luns> cd …/
/iscsi/iqn.20…01468102/tpg1> pwd
/iscsi/iqn.2003-01.org.linux-iscsi.server.x8664:sn.0f9f01468102/tpg1

/iscsi/iqn.20…01468102/tpg1> get attribute authentication
authentication=0

/iscsi/iqn.20…01468102/tpg1> get attribute generate_node_acls
generate_node_acls=0

ACL 实现访问控制

/iscsi/iqn.20…01468102/tpg1> cd acls
/iscsi/iqn.20…102/tpg1/acls> create iqn.2021-10.com.redhat:client
Created Node ACL for iqn.2021-10.com.redhat:client
Created mapped LUN 0.

/iscsi/iqn.20…102/tpg1/acls> cd /
/> ls
o- / … […]
o- backstores … […]
| o- block … [Storage Objects: 1]
| | o- lun0 … [/dev/vg1/lv1 (4.0GiB) write-thru activated]
| | o- alua … [ALUA Groups: 1]
| | o- default_tg_pt_gp … [ALUA state: Active/optimized]
| o- fileio … [Storage Objects: 0]
| o- pscsi … [Storage Objects: 0]
| o- ramdisk … [Storage Objects: 0]
o- iscsi … [Targets: 1]
| o- iqn.2003-01.org.linux-iscsi.server.x8664:sn.0f9f01468102 … [TPGs: 1]
| o- tpg1 … [no-gen-acls, no-auth]
| o- acls … [ACLs: 1]
| | o- iqn.2021-10.com.redhat:client … [Mapped LUNs: 1]
| | o- mapped_lun0 … [lun0 block/lun0 (rw)]
| o- luns … [LUNs: 1]
| | o- lun0 … [block/lun0 (/dev/vg1/lv1) (default_tg_pt_gp)]
| o- portals … [Portals: 1]
| o- 0.0.0.0:3260 … [OK]
o- loopback … [Targets: 0]
/>

配置完成退出

/> exit
Global pref auto_save_on_exit=true
Configuration saved to /etc/target/saveconfig.json
[root@server ~]#

重启服务

[root@server ~]# systemctl restart iscsi iscsid
[root@server ~]#

客户端

1.装包

[root@client ~]# yum install -y iscsi-initiator-utils
Updating Subscription Management repositories.
Unable to read consumer identity
This system is not registered to Red Hat Subscription Management. You can use subscription-manager to register.
BaseOS 2.7 MB/s | 2.8 kB 00:00
AppStream 3.1 MB/s | 3.2 kB 00:00
软件包 iscsi-initiator-utils-6.2.0.878-4.gitd791ce0.el8.x86_64 已安装。
依赖关系解决。
无需任何处理。
完毕！

2.编辑配置 关闭防火墙 selinux 启动服务

[root@client ~]# vim /etc/iscsi/initatorname.iscsi
[root@client ~]# cat /etc/iscsi/initatorname.iscsi
initatorName=iqn.2021-10.com.redhat:client
关闭防火墙 selinux

[root@client ~]# systemctl stop firewalld
[root@client ~]# setenforce 0
[root@client ~]# systemctl restart iscsi iscsid

3.客户端发现服务端的共享

[root@client ~]# iscsiadm -m discovery -t st -p 192.168.183.128
192.168.183.128:3260,1 iqn.2003-01.org.linux-iscsi.server.x8664:sn.0f9f01468102
[root@client ~]#

4.客户端登录

[root@client ~]# iscsiadm -m node -l
Logging in to [iface: default, target: iqn.2003-01.org.linux-iscsi.server.x8664:sn.0f9f01468102, portal: 192.168.183.128,3260]
iscsiadm: Could not login to [iface: default, target: iqn.2003-01.org.linux-iscsi.server.x8664:sn.0f9f01468102, portal: 192.168.183.128,3260].
iscsiadm: initiator reported error (24 - iSCSI login failed due to authorization failure)
iscsiadm: Could not log into all portals
[root@client ~]#

然后登不进去然后我不知道呜。。。。

5.对服务器的磁盘进行分区，格式化，挂载

mkfs.ext4 /dev/sdb1 /dev/sdb2

mkdir -p /share/disk

blkid

编辑 配置文件 vim /etc/fstab

挂载 mount -a

df -h

2、搭建时间服务器，客户端可在每天早晨的9:00整从ntp服务器更新自己的时间。

标签：tpg1,ntp,iscsi,dev,server,client,root
来源： https://blog.csdn.net/m0_53102443/article/details/120741628

本站声明： 1. iCode9 技术分享网（下文简称本站）提供的所有内容，仅供技术学习、探讨和分享；
2. 关于本站的所有留言、评论、转载及引用，纯属内容发起人的个人观点，与本站观点和立场无关；
3. 关于本站的所有言论和文字，纯属内容发起人的个人观点，与本站观点和立场无关；
4. 本站文章均是网友提供，不完全保证技术分享内容的完整性、准确性、时效性、风险性和版权归属；如您发现该文章侵犯了您的权益，可联系我们第一时间进行删除；
5. 本站为非盈利性的个人网站，所有内容不会用来进行牟利，也不会利用任何形式的广告来间接获益，纯粹是为了广大技术爱好者提供技术内容和技术思想的分享性交流网站。