kubeadm部署的测试环境k8s集群更改matser节点的名字

2021-08-25 02:01:15 阅读：237 来源： 互联网

标签：node kube matser master01 localdomain kubeadm k8s root localhost

忘记改hostname了，导致master节点name显示不正常

日常踩坑
而且flannel也没起来

[root@master01 ~]# kubectl get node
NAME                    STATUS     ROLES    AGE   VERSION
localhost.localdomain   NotReady   master   44h   v1.19.3
node01                  Ready      <none>   44h   v1.19.3
node02                  Ready      <none>   44h   v1.19.3

一、查看flannel状态

的确是分配到localhost.localdomain节点了，可是起不来

[root@master01 ~]# kubectl get po -n kube-system   kube-flannel-ds-w4mwc -owide
NAME                    READY   STATUS    RESTARTS   AGE    IP       NODE                    NOMINATED NODE   READINESS GATES
kube-flannel-ds-w4mwc   0/1     Pending   0          102s   <none>   localhost.localdomain   <none>           <none>

describe查看，以下是Events的日志
没了，重启也没用，于是决定先吧k8s的master节点name改一下

Events:
  Type    Reason     Age   From               Message
  ----    ------     ----  ----               -------
  Normal  Scheduled  3m7s  default-scheduler  Successfully assigned kube-system/kube-flannel-ds-w4mwc to localhost.localdomain

二、修改步骤(测试环境，生产慎用)

参考了一些文章，因为我这是测试环境，有是单matser所以我就干脆直接重新来了

2.1、删除节点

[root@master01 ~]# kubectl delete node node01 node02 localhost.localdomain 
node "node01" deleted
node "node02" deleted
node "localhost.localdomain" deleted

2.2、查看是否删除完毕

[root@master01 ~]# kubectl get nodes
No resources found

# 已经变成Pending状态
[root@master01 ~]# kubectl get csr  
NAME        AGE    SIGNERNAME                                    REQUESTOR                           CONDITION
csr-6pqpf   43m    kubernetes.io/kube-apiserver-client-kubelet   system:node:localhost.localdomain   Pending
csr-8vj2f   90m    kubernetes.io/kube-apiserver-client-kubelet   system:node:localhost.localdomain   Pending
csr-9cs9r   59m    kubernetes.io/kube-apiserver-client-kubelet   system:node:localhost.localdomain   Pending
csr-9gh45   105m   kubernetes.io/kube-apiserver-client-kubelet   system:node:localhost.localdomain   Pending
csr-9ln7v   151m   kubernetes.io/kube-apiserver-client-kubelet   system:node:localhost.localdomain   Pending
csr-9zbnw   74m    kubernetes.io/kube-apiserver-client-kubelet   system:node:localhost.localdomain   Pending
csr-d7jdl   162m   kubernetes.io/kube-apiserver-client-kubelet   system:node:localhost.localdomain   Pending
csr-dh8hs   136m   kubernetes.io/kube-apiserver-client-kubelet   system:node:localhost.localdomain   Pending
csr-ktbl6   12m    kubernetes.io/kube-apiserver-client-kubelet   system:node:localhost.localdomain   Pending
csr-m7d22   121m   kubernetes.io/kube-apiserver-client-kubelet   system:node:localhost.localdomain   Pending
csr-zsfgr   28m    kubernetes.io/kube-apiserver-client-kubelet   system:node:localhost.localdomain   Pending

2.3、清除集群所有的配置（三节点）

[root@master01 ~]# kubeadm reset
[root@master01 ~]# rm -rf $HOME/.kube/config  (这个在配置了kubectl的节点执行即可)  ## yum install -y net-tools 
[root@master01 ~]# ifconfig cni0 down && ip link delete cni0  (如果cni0没干掉就手动干掉)
[root@master01 ~]# ifconfig flannel.1 down && ip link delete flannel.1
[root@master01 ~]# ifconfig kube-ipvs0 down && ip link delete kube-ipvs0
[root@master01 ~]# ifconfig dummy0 down && ip link delete dummy0

2.4、修改kubeadm.yaml文件（重点）

这配置文件中有个参数，kind.nodeRegistration.name, 检查这个name是否为主机名，如果不是则改为主机名
kubeadm config print init-defaults > kubeadm.yaml (这文件是这样弄下来的，给新接触的同学提个醒，最好找到原先的。防止修改过。)

[root@master01 ~]# grep -C2 nodeRegistration kubeadm.yaml | grep name
  name: master01

2.5、重新初始化集群

[root@master01 ~]# kubeadm init --config kubeadm.yaml

2.5.1、成功后添加node节点即可

Your Kubernetes control-plane has initialized successfully!

To start using your cluster, you need to run the following as a regular user:

  mkdir -p $HOME/.kube
  sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
  sudo chown $(id -u):$(id -g) $HOME/.kube/config

You should now deploy a pod network to the cluster.
Run "kubectl apply -f [podnetwork].yaml" with one of the options listed at:
  https://kubernetes.io/docs/concepts/cluster-administration/addons/

Then you can join any number of worker nodes by running the following on each as root:

kubeadm join 192.168.1.70:6443 --token abcdef.0123456789abcdef \
    --discovery-token-ca-cert-hash sha256:f4d24e1b28d4dcb1ebaa9c4847221fda503bb08627175dbdacb589cc4ebfaa8a

2.7、验证

可以看到，已经改过来了
记录下，以防参坑。一时大意了，给自己留了个坑
"cni0" already has an IP address different from 10.244.1.1/24 (-owide后，到对应节点systemctl restart network)
"cni0" already has an IP address different from 10.244.1.1/24 （或者ifconfig cni0 down && ip link delete cni0）
然后重启coredns，还行就重新初始那节点吧。。。。。
发现cni0的这个网卡地址是10.244.2.1，明显与报错中的10.244.1.1不一致，将其改为10.244.1.1，重启网络服务，回到master，发现容器正常运行

kubeadm reset
systemctl stop kubelet && rm -rf /etc/cni/
ifconfig cni0 down && ifconfig flannel.1 down
ip link delete cni0 && ip link delete flannel.1
systemctl start kubelet

# 获取master的join token
kubeadm token create --print-join-command

# 重新加入节点
kubeadm join 192.168.1.70:6443 --token 1ni0cy.frcpumeb2bdmscqu     --discovery-token-ca-cert-hash sha256:f4d24e1b28d4dcb1ebaa9c4847221fda503bb08627175dbdacb589cc4ebfaa8a

[root@master01 ~]# kubectl get node
NAME       STATUS     ROLES    AGE     VERSION
master01   NotReady   master   2m37s   v1.19.3
node01     NotReady   <none>   34s     v1.19.3
node02     NotReady   <none>   38s     v1.19.3

2.8、部署网络插件

[root@master01 ~]# kubectl apply -f kube-flannel.yml

2.9、集群验证

[root@master01 ~]# kubectl get node
NAME       STATUS   ROLES    AGE   VERSION
master01   Ready    master   32m   v1.19.3
node01     Ready    <none>   30m   v1.19.3
node02     Ready    <none>   30m   v1.19.3

kubeadm参考： https://blog.csdn.net/qq_24794401/article/details/106654710

二进制安装可参坑：https://blog.csdn.net/chenshm/article/details/118718644

标签：node,kube,matser,master01,localdomain,kubeadm,k8s,root,localhost
来源： https://www.cnblogs.com/hsyw/p/15183210.html

本站声明： 1. iCode9 技术分享网（下文简称本站）提供的所有内容，仅供技术学习、探讨和分享；
2. 关于本站的所有留言、评论、转载及引用，纯属内容发起人的个人观点，与本站观点和立场无关；
3. 关于本站的所有言论和文字，纯属内容发起人的个人观点，与本站观点和立场无关；
4. 本站文章均是网友提供，不完全保证技术分享内容的完整性、准确性、时效性、风险性和版权归属；如您发现该文章侵犯了您的权益，可联系我们第一时间进行删除；
5. 本站为非盈利性的个人网站，所有内容不会用来进行牟利，也不会利用任何形式的广告来间接获益，纯粹是为了广大技术爱好者提供技术内容和技术思想的分享性交流网站。

ICode9