首页 > 其他分享> 文章详细

删除dgbroker

2021-08-23 11:04:37 阅读：167 来源： 互联网

标签：log 删除 dest dg stringlog dgbroker config archive

环境:

OS:Centos 7

DB:11.2.0.4

------------------------------------------------主库上执行---------------------------------------------

1.查看当前那个机器是主库(该命令在主从库上执行都可以)
DGMGRL> show configuration;

Configuration - slnngktest

Protection Mode: MaxPerformance
Databases:
slnngk - Primary database
slavea - Physical standby database

Fast-Start Failover: DISABLED

Configuration Status:
SUCCESS

2.删除配置
[oracle@dbmaster ~]$ dgmgtl
DGMGRL> connect sys/oracle
Connected.
DGMGRL> remove configuration;
Removed configuration

发现删除配置后,系统会自动修改如下参数(alert.log):

ALTER SYSTEM SET log_archive_dest_2='' SCOPE=BOTH;
Using STANDBY_ARCHIVE_DEST parameter default value as USE_DB_RECOVERY_FILE_DEST
ALTER SYSTEM SET log_archive_dest_state_2='ENABLE' SCOPE=BOTH;
ALTER SYSTEM SET log_archive_config='nodg_config' SCOPE=BOTH;
ALTER SYSTEM SWITCH ALL LOGFILE start (slnngk)

这个时候从库已经没有应用日志了
SQL> select process,status from v$managed_standby;

PROCESS STATUS
--------- ------------
ARCH CLOSING
ARCH CONNECTED
ARCH CONNECTED
ARCH CLOSING
RFS IDLE
RFS IDLE
RFS IDLE
MRP0 WAIT_FOR_LOG

8 rows selected.

3.修改dg_broker参数
SQL> connect / as sysdba
Connected.
SQL> alter system set dg_broker_start=false scope=both;

System altered.

4.主库上禁止归档到从库
查询如下,若有输出需要禁止
SQL> select dest_id, destination, status
2 from v$archive_dest
3 where target = 'STANDBY';

no rows selected

alter system set log_archive_dest_state_2=defer scope=both;

------------------------------------------------从库上执行---------------------------------------------

1.禁用dg_broker_start
SQL> alter system set dg_broker_start=false scope=both;

System altered.

-------------------主从上删除元数据文件-----------------
主库:
SQL> show parameter dg_broker

NAME TYPE VALUE
------------------------------------ ----------- ------------------------------
dg_broker_config_file1 string /u01/app/oracle/product/11.2.0.4/db_1/dbs/dr1slnngk.dat
dg_broker_config_file2 string /u01/app/oracle/product/11.2.0.4/db_1/dbs/dr2slnngk.dat
dg_broker_start boolean FALSE

rm /u01/app/oracle/product/11.2.0.4/db_1/dbs/dr1slnngk.dat

rm /u01/app/oracle/product/11.2.0.4/db_1/dbs/dr2slnngk.dat

从库:
SQL> show parameter dg_broker;

NAME TYPE VALUE
------------------------------------ ----------- ------------------------------
dg_broker_config_file1 string /u01/app/oracle/product/11.2.0.4/db_1/dbs/dr1slavea.dat
dg_broker_config_file2 string /u01/app/oracle/product/11.2.0.4/db_1/dbs/dr2slavea.dat
dg_broker_start boolean FALSE

rm /u01/app/oracle/product/11.2.0.4/db_1/dbs/dr1slavea.dat

rm /u01/app/oracle/product/11.2.0.4/db_1/dbs/dr2slavea.dat

---------------检查主从库dg相应的参数-----------------
1.主库
SQL> show parameters log_archive_config;

NAME TYPE VALUE
------------------------------------ ----------- ------------------------------
log_archive_config string nodg_config
SQL>

SQL> show parameters log_archive_dest_2;

NAME TYPE VALUE
------------------------------------ ----------- ------------------------------
log_archive_dest_2 string
log_archive_dest_20 string
log_archive_dest_21 string
log_archive_dest_22 string
log_archive_dest_23 string
log_archive_dest_24 string
log_archive_dest_25 string
log_archive_dest_26 string
log_archive_dest_27 string
log_archive_dest_28 string
log_archive_dest_29 string

发现删除dgbroker配置后,主库的这两个参数都已经设置为空

2.从库
SQL> show parameters log_archive_config;

NAME TYPE VALUE
------------------------------------ ----------- ------------------------------
log_archive_config string dg_config=(slaveb)

SQL> show parameters log_archive_dest_2;

NAME TYPE VALUE
------------------------------------ ----------- ------------------------------
log_archive_dest_2 string service=tnsslnngk async valid_
for=(online_logfiles,primary_r
ole) db_unique_name=slnngk
log_archive_dest_20 string
log_archive_dest_21 string
log_archive_dest_22 string
log_archive_dest_23 string
log_archive_dest_24 string
log_archive_dest_25 string
log_archive_dest_26 string
log_archive_dest_27 string

NAME TYPE VALUE
------------------------------------ ----------- ------------------------------
log_archive_dest_28 string
log_archive_dest_29 string
SQL>

发现从库修改了参数log_archive_config,原来从库该参数是dg_config=(slnngk,slaveb)
这种情况下,我们重新再启用dgbroker,看下dg是否能正常启动

dgmgrl添加了从库之后
DGMGRL> add database 'slavea' as connect identifier is 'tnsslavea';
DGMGRL> enable database 'slavea';

发现重新配置后,主数据库会自动修改log_archive_config和log_archive_dest_2这两个参数
Data Guard Broker executes SQL [alter system set log_archive_config='dg_config=(slnngk,slavea)']
ALTER SYSTEM SET log_archive_config='dg_config=(slnngk,slavea)' SCOPE=BOTH;
Sun Aug 22 22:36:28 2021
NSA2 started with pid=36, OS id=6301
Sun Aug 22 22:36:28 2021
Thread 1 advanced to log sequence 137 (LGWR switch)
Current log# 1 seq# 137 mem# 0: /u01/app/oracle/oradata/slnngk/redo01.log
Sun Aug 22 22:36:28 2021
Archived Log entry 332 added for thread 1 sequence 136 ID 0xd09347ca dest 1:
Sun Aug 22 22:36:29 2021
ARC0: Standby redo logfile selected for thread 1 sequence 136 for destination LOG_ARCHIVE_DEST_2
Sun Aug 22 22:36:31 2021
ALTER SYSTEM SET log_archive_dest_2='service="tnsslavea"','LGWR ASYNC NOAFFIRM delay=0 optional compression=disable max_failure=0 max_connections=1 reopen=300 db_unique_name="slavea" net_timeout=30','valid_for=(all_logfiles,primary_role)' SCOPE=BOTH;
ALTER SYSTEM ARCHIVE LOG

从库的应用日志自动也启动了
SQL> select process,status from v$managed_standby;

PROCESS STATUS
--------- ------------
ARCH CLOSING
ARCH CLOSING
ARCH CONNECTED
ARCH CLOSING
RFS IDLE
RFS IDLE
RFS IDLE
RFS IDLE
MRP0 APPLYING_LOG

9 rows selected.

标签：log,删除,dest,dg,stringlog,dgbroker,config,archive
来源： https://www.cnblogs.com/hxlasky/p/15174981.html

本站声明： 1. iCode9 技术分享网（下文简称本站）提供的所有内容，仅供技术学习、探讨和分享；
2. 关于本站的所有留言、评论、转载及引用，纯属内容发起人的个人观点，与本站观点和立场无关；
3. 关于本站的所有言论和文字，纯属内容发起人的个人观点，与本站观点和立场无关；
4. 本站文章均是网友提供，不完全保证技术分享内容的完整性、准确性、时效性、风险性和版权归属；如您发现该文章侵犯了您的权益，可联系我们第一时间进行删除；
5. 本站为非盈利性的个人网站，所有内容不会用来进行牟利，也不会利用任何形式的广告来间接获益，纯粹是为了广大技术爱好者提供技术内容和技术思想的分享性交流网站。

ICode9

删除dgbroker