标签:线束 NO being NA there MedAccred YES AC8121 procedure
26.11 Audit Note: NA applies when there is no customer requirement to calculate circular mil area.YES/NO/NA
Audit Note: NA applies when there is no customer requirement to calculate circular mil area.
26.12 P- If required, is there a procedure to control multiple wire insertion into a single terminal?YES/NO/NA
26.13 P- If required, is there a procedure for use of fillers in crimp terminals?YES/NO/NA
26.14 P- Unless otherwise specified by the customer, is there a procedure to prevent the crimping of tinned wires?YES/NO/NA
Audit Note: Tinned wire per the IPC-T-50, Tinning – The application of molten solder to a basis metal or surface finish in order to increase its solderability.
26.15 P- Is there a procedure to prevent conductor strands from being cut or modified in any manner to reduce CMA to fit a termination?YES/NO
26.16 C- Is there evidence that procedure for crimping is being followed?YES/NO
26.17 C- Is there evidence that procedure for positioning and placement of wires into terminals to be crimped is being followed?YES/NO
26.18 C- Is the crimping equipment being controlled in accordance with the procedures, including maintenance and calibration?YES/NO
26.19 C- If required, is there evidence that crimping tools other than manufacturer’s approved tooling have been certified prior to use in production?YES/NO/NA
26.20 C- Is documented and approved tooling being used?YES/NO
标签:线束,NO,being,NA,there,MedAccred,YES,AC8121,procedure 来源: https://blog.csdn.net/weixin_47885104/article/details/119384168
本站声明: 1. iCode9 技术分享网(下文简称本站)提供的所有内容,仅供技术学习、探讨和分享; 2. 关于本站的所有留言、评论、转载及引用,纯属内容发起人的个人观点,与本站观点和立场无关; 3. 关于本站的所有言论和文字,纯属内容发起人的个人观点,与本站观点和立场无关; 4. 本站文章均是网友提供,不完全保证技术分享内容的完整性、准确性、时效性、风险性和版权归属;如您发现该文章侵犯了您的权益,可联系我们第一时间进行删除; 5. 本站为非盈利性的个人网站,所有内容不会用来进行牟利,也不会利用任何形式的广告来间接获益,纯粹是为了广大技术爱好者提供技术内容和技术思想的分享性交流网站。