标签：38 -- 4.9 sudo 3.1 Xenomai3.1 xenomai deb Ubuntu18.04
xenomai是linux实时改造的重要方案之一，下面给出其具体的安装以及Ubuntu内核编译过程。
原理图如下
1. 下载ubuntu内核以及xenomai3.1软件包
#开局先换源
wget https://www.kernel.org/pub/linux/kernel/v4.x/linux-4.9.38.tar.gz
wget https://xenomai.org/downloads/xenomai/stable/xenomai-3.1.tar.bz2
2. 压缩包解压，并复制到/usr/src
sudo tar xf linux-4.9.38.tar.gz
sudo tar xf xenomai-3.1.tar.bz2
sudo cp -r linux-4.9.38 /usr/src
sudo cp -r xenomai-3.1 /usr/src
3. 给ubuntu内核打上xenomai补丁，建立一个x86_64位内核
cd linux-4.9.38
sudo wget https://xenomai.org/downloads/ipipe/v4.x/x86/older/ipipe-core-4.9.38-x86-3.patch
../xenomai-3.1/scripts/prepare-kernel.sh --arch=x86_64 --ipipe=ipipe-core-4.9.38-x86-3.patch
#File arch/x86/Kconfig is read-only；trying to patch anyway
#checking file arch/x86/Kconfig
#...
#如出现上述报错，记得加sudo
4. 配置内核
sudo apt install gcc libc6-dev libncurses5-dev libssl-dev build-essential bison flex
#/bin/sh: 1: gcc: not found
#scripts/Makefile.host:107: recipe for target'scripts/basic/fixed' failed
#make[1]: *** [scripts/basic/fixed] Error 127
#Makefile:588: recipe for target 'menuconfig' failed
#make: *** [scripts_basic] Error 2
#如出现上述报错，在安装下面的关键库
#sudo apt install lib32stdc++6
#sudo apt install lib32z1
yes "" | make oldconfig
make menuconfig
#如还提示安装ncurses报错，加sudo
#进入menuconfig界面，会看影响xenomai实时性的警告信息：
#*** WARNING! Page migration (CONFIG_MIGRATION) may increase ***
#*** latency. ***
#*** WARNING! At least one of APM, CPU frequency scaling, ACPI ‘processor‘ ***
#*** or CPU idle features is enabled. Any of these options may ***
#*** cause troubles with Xenomai. You should disable them. ***
#具体配置如下所示：
* General setup
--> Local version - append to kernel release: -xenomai-3.1
--> Timers subsystem
--> High Resolution Timer Support (Enable)
* Xenomai/cobalt
--> Sizes and static limits
--> Number of registry slots (512 --> 4096)
--> Size of system heap (Kb) (512 --> 4096)
--> Size of private heap (Kb) (64 --> 256)
--> Size of shared heap (Kb) (64 --> 256)
--> Maximum number of POSIX timers per process (128 --> 512)
--> Drivers
--> RTnet
--> RTnet, TCP/IP socket interface (Enable)
--> Drivers
--> New intel(R) PRO/1000 PCIe (Enable)
--> Realtek 8169 (Enable)
--> Loopback (Enable)
--> Add-Ons
--> Real-Time Capturing Support (Enable)
* Power management and ACPI options
--> CPU Frequency scaling
--> CPU Frequency scaling (Disable)
--> ACPI (Advanced Configuration and Power Interface) Support
--> Processor (Disable)
--> CPU Idle
--> CPU idle PM support (Disable)
* Pocessor type and features
--> Enable maximum number of SMP processors and NUMA nodes (Disable)
// Ref : http://xenomai.org/pipermail/xenomai/2017-September/037718.html
--> Processor family
--> Core 2/newer Xeon (if "cat /proc/cpuinfo | grep family" returns 6, set as Generic otherwise)
// Xenomai will issue a warning about CONFIG_MIGRATION, disable those in this orde
--> Transparent Hugepage Support (Disable)
--> Allow for memory compaction (Disable)
--> Contiguous Memory Allocation (Disable)
--> Allow for memory compaction
--> Page Migration (Disable)
* Device Drivers
--> Staging drivers
--> Unisys SPAR driver support
--> Unisys visorbus driver (Disable)
配置完成后界面如下
5. 进一步构建实时内核
sudo apt install kernel-package
6.编译内核
CONCURRENCY_LEVEL=$(nproc) make-kpkg --rootcmd fakeroot --initrd kernel_image kernel_headers
7.安装生成的系统文件
cd ..
sudo dpkg -i linux-headers-4.9.38-xenomai-3.1_4.9.38-xenomai-3.1-10.00.Custom_amd64.deb linux-image-4.9.38-xenomai-3.1_4.9.38-xenomai-3.1-10.00.Custom_amd64.deb
#我编译的放在文章最后
8. 允许非root用户
sudo addgroup xenomai --gid 1234
sudo addgroup root xenomai
sudo usermod -a -G xenomai $USER
9. 配置GRUB
sudo gedit /etc/default/grub
#具体修改如下
GRUB_DEFAULT="Advanced options for Ubuntu>Ubuntu, with Linux 4.9.38-xenomai-3.1"
#GRUB_DEFAULT=saved
#GRUB_SAVEDEFAULT=true
# Comment the following lines
#GRUB_HIDDEN_TIMEOUT=0
#GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=5
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash xenomai.allowed_group=1234"
GRUB_CMDLINE_LINUX=""
#更新GRUB并重新启动
sudo update-grub
#重启电脑
sudo reboot
#重新开机后选择Ubuntu高级内核
10. 安装xenomai用户空间库
uname -r
# 4.9.38-xenomai-3.1
dmesg | grep Xenomai
虚拟机的话就是上面样子
电脑或者工控机是话就是下面样子
cd xenomai-3.1
./configure --with-pic --with-core=cobalt --enable-smp --disable-tls --enable-dlopen-libs --disable-clock-monotonic-raw
make -j`nproc`
sudo make install
11. 更新环境变量
echo '
### Xenomai
export XENOMAI_ROOT_DIR=/usr/xenomai
export XENOMAI_PATH=/usr/xenomai
export PATH=$PATH:$XENOMAI_PATH/bin:$XENOMAI_PATH/sbin
export PKG_CONFIG_PATH=$PKG_CONFIG_PATH:$XENOMAI_PATH/lib/pkgconfig
export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:$XENOMAI_PATH/lib
export OROCOS_TARGET=xenomai
' >> ~/.xenomai_rc
echo 'source ~/.xenomai_rc' >> ~/.bashrc
source ~/.bashrc
12. 测试
#增加权限
sudo chmod -R 777 /dev/rtdm/memdev-private
sudo chmod -R 777 /dev/rtdm/memdev-shared
xeno latency
#或者
cd /usr/xenomai/bin
sudo ./latency
上图为虚拟机，下图为工控机
#延迟为负数，修复方法
sudo -s
echo 0 > /proc/xenomai/latency
# Now run the latency test
# If the minimum latency value is positive,
# then get the lowest value from the latency test (ex: 0.088 us)
# and write it to the calibration file ( here you have to write 88 ns) :
echo my_super_value_in_ns > /proc/xenomai/latency
13. 最后附上我编译的内核包
链接：https://pan.baidu.com/s/1qVAoUttiPyqt9byUv58MQg
提取码：kntf
复制这段内容后打开百度网盘手机App，操作更方便哦
标签：38,--,4.9,sudo,3.1,Xenomai3.1,xenomai,deb,Ubuntu18.04 来源： https://blog.csdn.net/weixin_48395629/article/details/115443166
本站声明： 1. iCode9 技术分享网（下文简称本站）提供的所有内容，仅供技术学习、探讨和分享； 2. 关于本站的所有留言、评论、转载及引用，纯属内容发起人的个人观点，与本站观点和立场无关； 3. 关于本站的所有言论和文字，纯属内容发起人的个人观点，与本站观点和立场无关； 4. 本站文章均是网友提供，不完全保证技术分享内容的完整性、准确性、时效性、风险性和版权归属；如您发现该文章侵犯了您的权益，可联系我们第一时间进行删除； 5. 本站为非盈利性的个人网站，所有内容不会用来进行牟利，也不会利用任何形式的广告来间接获益，纯粹是为了广大技术爱好者提供技术内容和技术思想的分享性交流网站。