标签：do configureh zynqmp fsbl 2020.1 hankf build PetaLinux zcu106

更换PetaLinux工程的HDF/XSA文件后，PetaLinux工程编译出现FSBL do_configureh错误。使用命令“petalinux-build -x mrproper -f ”，彻底清除工程，再编译工程，不再有问题。

错误记录如下：

DEBUG: Executing shell function do_configure
MISC_ARG is  -yamlconf /proj/hankf/zcu106/v201/vcu-trd-xv20-plddr/build/tmp/work/zcu106_zynqmp-xilinx-linux/fsbl/2020.1+gitAUTOINC+6cbb920f4d-r0/fsbl.yaml
APP_ARG is  -app "Zynq MP FSBL"
Using xsct from: /opt/Xilinx/peta/2020.1/tools/xsct//bin/xsct
cmd is: xsct -sdx -nodisp /proj/hankf/zcu106/v201/vcu-trd-xv20-plddr/build/tmp/work/zcu106_zynqmp-xilinx-linux/fsbl/2020.1+gitAUTOINC+6cbb920f4d-r0/app.tcl -ws /proj/hankf/zcu106/v201/vcu-trd-xv20-plddr/build/tmp/work/zcu106_zynqmp-xilinx-linux/fsbl/2020.1+gitAUTOINC+6cbb920f4d-r0/build -pname fsbl -rp /proj/hankf/zcu106/v201/vcu-trd-xv20-plddr/build/tmp/work/zcu106_zynqmp-xilinx-linux/fsbl/2020.1+gitAUTOINC+6cbb920f4d-r0/git -processor psu_cortexa53_0 -hdf /proj/hankf/zcu106/v201/vcu-trd-xv20-plddr/build/tmp/deploy/images/zcu106-zynqmp/Xilinx-zcu106-zynqmp.xsa -arch 64  -app "Zynq MP FSBL"  -yamlconf /proj/hankf/zcu106/v201/vcu-trd-xv20-plddr/build/tmp/work/zcu106_zynqmp-xilinx-linux/fsbl/2020.1+gitAUTOINC+6cbb920f4d-r0/fsbl.yaml
INFO: [Hsi 55-2053] elapsed time for repository (/opt/Xilinx/peta/2020.1/tools/xsct/data/embeddedsw) loading 0 seconds
INFO: Update hw fsbl_plat project
Loading the sw platform from /proj/hankf/zcu106/v201/vcu-trd-xv20-plddr/build/tmp/work/zcu106_zynqmp-xilinx-linux/fsbl/2020.1+gitAUTOINC+6cbb920f4d-r0/build/fsbl_plat/platform.spr
Reading the platform  : "fsbl_plat"
Opening the hardware design, this may take few seconds.
Failed to generate bsp for application zynqmp_fsbl
    while executing
"builtin_platform -addbootdomains"
    (procedure "platform" line 353)
    invoked from within
"platform create -name $params(hwpname) -hw $params(hdf) -out $params(ws)"
    invoked from within
"if { $params(ws) ne "" } {
       #Local Work Space available
       if { $params(pname) ne "" } {
              # hwpname/bspname is empty then default it to pname+_hwproj/b..."
    (file "/proj/hankf/zcu106/v201/vcu-trd-xv20-plddr/build/tmp/work/zcu106_zynqmp-xilinx-linux/fsbl/2020.1+gitAUTOIN..." line 139)
WARNING: exit code 1 from a shell command.
ERROR: Execution of '/proj/hankf/zcu106/v201/vcu-trd-xv20-plddr/build/tmp/work/zcu106_zynqmp-xilinx-linux/fsbl/2020.1+gitAUTOINC+6cbb920f4d-r0/temp/run.do_configure.39888' failed with exit code 1:
MISC_ARG is  -yamlconf /proj/hankf/zcu106/v201/vcu-trd-xv20-plddr/build/tmp/work/zcu106_zynqmp-xilinx-linux/fsbl/2020.1+gitAUTOINC+6cbb920f4d-r0/fsbl.yaml
APP_ARG is  -app "Zynq MP FSBL"
Using xsct from: /opt/Xilinx/peta/2020.1/tools/xsct//bin/xsct
cmd is: xsct -sdx -nodisp /proj/hankf/zcu106/v201/vcu-trd-xv20-plddr/build/tmp/work/zcu106_zynqmp-xilinx-linux/fsbl/2020.1+gitAUTOINC+6cbb920f4d-r0/app.tcl -ws /proj/hankf/zcu106/v201/vcu-trd-xv20-plddr/build/tmp/work/zcu106_zynqmp-xilinx-linux/fsbl/2020.1+gitAUTOINC+6cbb920f4d-r0/build -pname fsbl -rp /proj/hankf/zcu106/v201/vcu-trd-xv20-plddr/build/tmp/work/zcu106_zynqmp-xilinx-linux/fsbl/2020.1+gitAUTOINC+6cbb920f4d-r0/git -processor psu_cortexa53_0 -hdf /proj/hankf/zcu106/v201/vcu-trd-xv20-plddr/build/tmp/deploy/images/zcu106-zynqmp/Xilinx-zcu106-zynqmp.xsa -arch 64  -app "Zynq MP FSBL"  -yamlconf /proj/hankf/zcu106/v201/vcu-trd-xv20-plddr/build/tmp/work/zcu106_zynqmp-xilinx-linux/fsbl/2020.1+gitAUTOINC+6cbb920f4d-r0/fsbl.yaml
INFO: [Hsi 55-2053] elapsed time for repository (/opt/Xilinx/peta/2020.1/tools/xsct/data/embeddedsw) loading 0 seconds
INFO: Update hw fsbl_plat project
Loading the sw platform from /proj/hankf/zcu106/v201/vcu-trd-xv20-plddr/build/tmp/work/zcu106_zynqmp-xilinx-linux/fsbl/2020.1+gitAUTOINC+6cbb920f4d-r0/build/fsbl_plat/platform.spr
Reading the platform  : "fsbl_plat"
Opening the hardware design, this may take few seconds.
Failed to generate bsp for application zynqmp_fsbl
    while executing
"builtin_platform -addbootdomains"
    (procedure "platform" line 353)
    invoked from within
"platform create -name $params(hwpname) -hw $params(hdf) -out $params(ws)"
    invoked from within
"if { $params(ws) ne "" } {
       #Local Work Space available
       if { $params(pname) ne "" } {
              # hwpname/bspname is empty then default it to pname+_hwproj/b..."
    (file "/proj/hankf/zcu106/v201/vcu-trd-xv20-plddr/build/tmp/work/zcu106_zynqmp-xilinx-linux/fsbl/2020.1+gitAUTOIN..." line 139)
WARNING: exit code 1 from a shell command.

测试版本 petalinux 2020.1

标签：do,configureh,zynqmp,fsbl,2020.1,hankf,build,PetaLinux,zcu106
来源： https://www.cnblogs.com/hankfu/p/13959336.html

本站声明： 1. iCode9 技术分享网（下文简称本站）提供的所有内容，仅供技术学习、探讨和分享；
2. 关于本站的所有留言、评论、转载及引用，纯属内容发起人的个人观点，与本站观点和立场无关；
3. 关于本站的所有言论和文字，纯属内容发起人的个人观点，与本站观点和立场无关；
4. 本站文章均是网友提供，不完全保证技术分享内容的完整性、准确性、时效性、风险性和版权归属；如您发现该文章侵犯了您的权益，可联系我们第一时间进行删除；
5. 本站为非盈利性的个人网站，所有内容不会用来进行牟利，也不会利用任何形式的广告来间接获益，纯粹是为了广大技术爱好者提供技术内容和技术思想的分享性交流网站。