linuxRHEL8安装screen

2020-10-29 13:31:27 阅读：288 来源： 互联网

标签：linuxprobe 安装 screen dev yum linuxRHEL8 cdrom root

1、问题

[root@linuxprobe linuxprobe]# screen -S test  ## RHEL8自身不带screen
bash: screen: command not found...
Failed to search for file: Cannot update read-only repo
[root@linuxprobe linuxprobe]# screen --version
bash: screen: command not found...
Failed to search for file: Cannot update read-only repo

2、yum安装

[root@linuxprobe linuxprobe]# yum install screen  ## 没有配置yum仓库
Updating Subscription Management repositories.
Unable to read consumer identity
This system is not registered to Red Hat Subscription Management. You can use subscription-manager to register.
Error: There are no enabled repos.

3、配置yum仓库

[root@linuxprobe linuxprobe]# df -h  ## 查看当前挂载情况
Filesystem             Size  Used Avail Use% Mounted on
devtmpfs               969M     0  969M   0% /dev
tmpfs                  984M     0  984M   0% /dev/shm
tmpfs                  984M  9.6M  974M   1% /run
tmpfs                  984M     0  984M   0% /sys/fs/cgroup
/dev/mapper/rhel-root   17G  3.9G   14G  23% /
/dev/sda1             1014M  152M  863M  15% /boot
tmpfs                  197M   20K  197M   1% /run/user/42
tmpfs                  197M  2.3M  195M   2% /run/user/0
/dev/sr0               6.7G  6.7G     0 100% /run/media/root/RHEL-8-0-0-BaseOS-x86_64
[root@linuxprobe linuxprobe]# mkdir -p /media/cdrom  ## 创建光盘挂载点
[root@linuxprobe linuxprobe]# mount /dev/cdrom /media/cdrom/  ## 挂载光盘
mount: /media/cdrom: WARNING: device write-protected, mounted read-only.
[root@linuxprobe linuxprobe]# df -h  ## 查看挂载情况
Filesystem             Size  Used Avail Use% Mounted on
devtmpfs               969M     0  969M   0% /dev
tmpfs                  984M     0  984M   0% /dev/shm
tmpfs                  984M  9.6M  974M   1% /run
tmpfs                  984M     0  984M   0% /sys/fs/cgroup
/dev/mapper/rhel-root   17G  3.9G   14G  23% /
/dev/sda1             1014M  152M  863M  15% /boot
tmpfs                  197M   20K  197M   1% /run/user/42
tmpfs                  197M  2.4M  195M   2% /run/user/0
/dev/sr0               6.7G  6.7G     0 100% /media/cdrom

4、设定光盘挂载为开机自动启动

[root@linuxprobe linuxprobe]# cat /etc/fstab  ## 查看开机自动启动配置文件

#
# /etc/fstab
# Created by anaconda on Thu Oct 29 01:05:13 2020
#
# Accessible filesystems, by reference, are maintained under '/dev/disk/'.
# See man pages fstab(5), findfs(8), mount(8) and/or blkid(8) for more info.
#
# After editing this file, run 'systemctl daemon-reload' to update systemd
# units generated from this file.
#
/dev/mapper/rhel-root   /                       xfs     defaults        0 0
UUID=4d9618c5-4252-4910-8e97-d4d28755ed1a /boot                   xfs     defaults        0 0
/dev/mapper/rhel-swap   swap                    swap    defaults        0 0
[root@linuxprobe linuxprobe]# echo -e "/dev/cdrom\t/media/cdrom\tiso9660\tdefaults\t0\t0" >> /etc/fstab  ## 修改开机自动启动配置文件
[root@linuxprobe linuxprobe]# cat /etc/fstab  ## 查看开机自动启动配置文件

#
# /etc/fstab
# Created by anaconda on Thu Oct 29 01:05:13 2020
#
# Accessible filesystems, by reference, are maintained under '/dev/disk/'.
# See man pages fstab(5), findfs(8), mount(8) and/or blkid(8) for more info.
#
# After editing this file, run 'systemctl daemon-reload' to update systemd
# units generated from this file.
#
/dev/mapper/rhel-root   /                       xfs     defaults        0 0
UUID=4d9618c5-4252-4910-8e97-d4d28755ed1a /boot                   xfs     defaults        0 0
/dev/mapper/rhel-swap   swap                    swap    defaults        0 0
/dev/cdrom      /media/cdrom    iso9660 defaults        0       0

5、创建yum仓库的配置文件

vim rhel8.repo  ##进行编辑，保存退出

[BaseOS]
name=BaseOS
baseurl=file:///media/cdrom/BaseOS
gpgcheck=0
enbaled=1

[AppStream]
name=AppStream
baseurl=file:///media/cdrom/AppStream
gpgcheck=0
enabled=1

6、测试yum仓库

yum install httpd -y

7、安装screen

[root@linuxprobe yum.repos.d]# yum install screen
Updating Subscription Management repositories.
Unable to read consumer identity
This system is not registered to Red Hat Subscription Management. You can use subscription-manager to register.
Last metadata expiration check: 0:01:06 ago on Thu 29 Oct 2020 01:21:54 PM CST.
No match for argument: screen
Error: Unable to find a match

8、执行如下命令

yum install https://dl.fedoraproject.org/pub/epel/epel-release-latest-8.noarch.rpm -y

9、再次安装screen

yum install screen -y

10、测试screen

[root@linuxprobe yum.repos.d]# screen --version
Screen version 4.06.02 (GNU) 23-Oct-17

标签：linuxprobe,安装,screen,dev,yum,linuxRHEL8,cdrom,root
来源： https://www.cnblogs.com/liujiaxin2018/p/13896227.html

本站声明： 1. iCode9 技术分享网（下文简称本站）提供的所有内容，仅供技术学习、探讨和分享；
2. 关于本站的所有留言、评论、转载及引用，纯属内容发起人的个人观点，与本站观点和立场无关；
3. 关于本站的所有言论和文字，纯属内容发起人的个人观点，与本站观点和立场无关；
4. 本站文章均是网友提供，不完全保证技术分享内容的完整性、准确性、时效性、风险性和版权归属；如您发现该文章侵犯了您的权益，可联系我们第一时间进行删除；
5. 本站为非盈利性的个人网站，所有内容不会用来进行牟利，也不会利用任何形式的广告来间接获益，纯粹是为了广大技术爱好者提供技术内容和技术思想的分享性交流网站。

ICode9

linuxRHEL8安装screen