标签：dbms logs default Linux neo4j connector 服务器 policy Neo4j
注意:
Neo4j是基于Java的图形数据库，运行Neo4j需要启动JVM进程，因此必须安装JAVA SE的JDK。
下载安装包:
iunx环境Neo4j下载地址：https://neo4j.com/download/other-releases/#releases(社区版免费)
解压安装:
tar -zxvf neo4j-community-3.4.5-unix.tar.gz
修改配置:
在安装目录下找到conf目录下的neo4j.conf文件,修改相关的配置:
# 修改第22行load csv时l路径，在前面加个#，可从任意路径读取文件
#dbms.directories.import=import
# 修改35行和36行，设置JVM初始堆内存和JVM最大堆内存
# 生产环境给的JVM最大堆内存越大越好，但是要小于机器的物理内存
dbms.memory.heap.initial_size=5g
dbms.memory.heap.max_size=10g
# 修改46行，可以认为这个是缓存，如果机器配置高，这个越大越好
dbms.memory.pagecache.size=10g
# 修改54行，去掉改行的#，可以远程通过ip访问neo4j数据库
dbms.connectors.default_listen_address=0.0.0.0
# 默认 bolt端口是7687，http端口是7474，https关口是7473，不修改下面3项也可以
# 修改71行，去掉#，设置http端口为7687，端口可以自定义，只要不和其他端口冲突就行
#dbms.connector.bolt.listen_address=:7687
# 修改75行，去掉#，设置http端口为7474，端口可以自定义，只要不和其他端口冲突就行
dbms.connector.http.listen_address=:7474
# 修改79行，去掉#，设置http端口为7473，端口可以自定义，只要不和其他端口冲突就行
dbms.connector.https.listen_address=:7473
# 修改227行，去掉#，允许从远程url来load csv
dbms.security.allow_csv_import_from_file_urls=true
# 修改246行，允许使用neo4j-shell，类似于mysql 命令行之类的
dbms.shell.enabled=true
# 修改235行，去掉#，设置连接neo4j-shell的端口，一般都是localhost或者127.0.0.1，这样安全，其他地址的话，一般使用https就行
dbms.shell.host=127.0.0.1
# 修改250行，去掉#，设置neo4j-shell端口，端口可以自定义，只要不和其他端口冲突就行
dbms.shell.port=1337
# 修改254行，设置neo4j可读可写
dbms.read_only=false
可参考以下配置:
#*****************************************************************
# Neo4j configuration
#
# For more details and a complete list of settings, please see
# https://neo4j.com/docs/operations-manual/current/reference/configuration-settings/
#*****************************************************************
# The name of the database to mount
#dbms.active_database=graph.db
# Paths of directories in the installation.
#dbms.directories.data=data
#dbms.directories.plugins=plugins
#dbms.directories.certificates=certificates
#dbms.directories.logs=logs
#dbms.directories.lib=lib
#dbms.directories.run=run
# This setting constrains all `LOAD CSV` import files to be under the `import` directory. Remove or comment it out to
# allow files to be loaded from anywhere in the filesystem; this introduces possible security problems. See the
# `LOAD CSV` section of the manual for details.
#dbms.directories.import=import
# Whether requests to Neo4j are authenticated.
# To disable authentication, uncomment this line
#dbms.security.auth_enabled=false
# Enable this to be able to upgrade a store from an older version.
#dbms.allow_upgrade=true
# Java Heap Size: by default the Java heap size is dynamically
# calculated based on available system resources.
# Uncomment these lines to set specific initial and maximum
# heap size.
dbms.memory.heap.initial_size=2G
dbms.memory.heap.max_size=4G
# The amount of memory to use for mapping the store files, in bytes (or
# kilobytes with the 'k' suffix, megabytes with 'm' and gigabytes with 'g').
# If Neo4j is running on a dedicated server, then it is generally recommended
# to leave about 2-4 gigabytes for the operating system, give the JVM enough
# heap to hold all your transaction state and query context, and then leave the
# rest for the page cache.
# The default page cache memory assumes the machine is dedicated to running
# Neo4j, and is heuristically set to 50% of RAM minus the max Java heap size.
dbms.memory.pagecache.size=4g
#*****************************************************************
# Network connector configuration
#*****************************************************************
# With default configuration Neo4j only accepts local connections.
# To accept non-local connections, uncomment this line:
dbms.connectors.default_listen_address=0.0.0.0
# You can also choose a specific network interface, and configure a non-default
# port for each connector, by setting their individual listen_address.
# The address at which this server can be reached by its clients. This may be the server's IP address or DNS name, or
# it may be the address of a reverse proxy which sits in front of the server. This setting may be overridden for
# individual connectors below.
#dbms.connectors.default_advertised_address=localhost
# You can also choose a specific advertised hostname or IP address, and
# configure an advertised port for each connector, by setting their
# individual advertised_address.
# Bolt connector
dbms.connector.bolt.enabled=true
#dbms.connector.bolt.tls_level=OPTIONAL
dbms.connector.bolt.listen_address=:7687
# HTTP Connector. There can be zero or one HTTP connectors.
dbms.connector.http.enabled=true
dbms.connector.http.listen_address=:7474
# HTTPS Connector. There can be zero or one HTTPS connectors.
dbms.connector.https.enabled=true
dbms.connector.https.listen_address=:7473
# Number of Neo4j worker threads.
#dbms.threads.worker_count=
#*****************************************************************
# SSL system configuration
#*****************************************************************
# Names of the SSL policies to be used for the respective components.
# The legacy policy is a special policy which is not defined in
# the policy configuration section, but rather derives from
# dbms.directories.certificates and associated files
# (by default: neo4j.key and neo4j.cert). Its use will be deprecated.
# The policies to be used for connectors.
#
# N.B: Note that a connector must be configured to support/require
# SSL/TLS for the policy to actually be utilized.
#
# see: dbms.connector.*.tls_level
#bolt.ssl_policy=legacy
#https.ssl_policy=legacy
#*****************************************************************
# SSL policy configuration
#*****************************************************************
# Each policy is configured under a separate namespace, e.g.
# dbms.ssl.policy.<policyname>.*
#
# The example settings below are for a new policy named 'default'.
# The base directory for cryptographic objects. Each policy will by
# default look for its associated objects (keys, certificates, ...)
# under the base directory.
#
# Every such setting can be overridden using a full path to
# the respective object, but every policy will by default look
# for cryptographic objects in its base location.
#
# Mandatory setting
#dbms.ssl.policy.default.base_directory=certificates/default
# Allows the generation of a fresh private key and a self-signed
# certificate if none are found in the expected locations. It is
# recommended to turn this off again after keys have been generated.
#
# Keys should in general be generated and distributed offline
# by a trusted certificate authority (CA) and not by utilizing
# this mode.
#dbms.ssl.policy.default.allow_key_generation=false
# Enabling this makes it so that this policy ignores the contents
# of the trusted_dir and simply resorts to trusting everything.
#
# Use of this mode is discouraged. It would offer encryption but no security.
#dbms.ssl.policy.default.trust_all=false
# The private key for the default SSL policy. By default a file
# named private.key is expected under the base directory of the policy.
# It is mandatory that a key can be found or generated.
#dbms.ssl.policy.default.private_key=
# The private key for the default SSL policy. By default a file
# named public.crt is expected under the base directory of the policy.
# It is mandatory that a certificate can be found or generated.
#dbms.ssl.policy.default.public_certificate=
# The certificates of trusted parties. By default a directory named
# 'trusted' is expected under the base directory of the policy. It is
# mandatory to create the directory so that it exists, because it cannot
# be auto-created (for security purposes).
#
# To enforce client authentication client_auth must be set to 'require'!
#dbms.ssl.policy.default.trusted_dir=
# Client authentication setting. Values: none, optional, require
# The default is to require client authentication.
#
# Servers are always authenticated unless explicitly overridden
# using the trust_all setting. In a mutual authentication setup this
# should be kept at the default of require and trusted certificates
# must be installed in the trusted_dir.
#dbms.ssl.policy.default.client_auth=require
# It is possible to verify the hostname that the client uses
# to connect to the remote server. In order for this to work, the server public
# certificate must have a valid CN and/or matching Subject Alternative Names.
# Note that this is irrelevant on host side connections (sockets receiving
# connections).
# To enable hostname verification client side on nodes, set this to true.
#dbms.ssl.policy.default.verify_hostname=false
# A comma-separated list of allowed TLS versions.
# By default only TLSv1.2 is allowed.
#dbms.ssl.policy.default.tls_versions=
# A comma-separated list of allowed ciphers.
# The default ciphers are the defaults of the JVM platform.
#dbms.ssl.policy.default.ciphers=
#*****************************************************************
# Logging configuration
#*****************************************************************
# To enable HTTP logging, uncomment this line
#dbms.logs.http.enabled=true
# Number of HTTP logs to keep.
#dbms.logs.http.rotation.keep_number=5
# Size of each HTTP log that is kept.
#dbms.logs.http.rotation.size=20m
# To enable GC Logging, uncomment this line
#dbms.logs.gc.enabled=true
# GC Logging Options
# see http://docs.oracle.com/cd/E19957-01/819-0084-10/pt_tuningjava.html#wp57013 for more information.
#dbms.logs.gc.options=-XX:+PrintGCDetails -XX:+PrintGCDateStamps -XX:+PrintGCApplicationStoppedTime -XX:+PrintPromotionFailure -XX:+PrintTenuringDistribution
# For Java 9 and newer GC Logging Options
# see https://docs.oracle.com/javase/10/tools/java.htm#JSWOR-GUID-BE93ABDC-999C-4CB5-A88B-1994AAAC74D5
#dbms.logs.gc.options=-Xlog:gc*,safepoint,age*=trace
# Number of GC logs to keep.
#dbms.logs.gc.rotation.keep_number=5
# Size of each GC log that is kept.
#dbms.logs.gc.rotation.size=20m
# Log level for the debug log. One of DEBUG, INFO, WARN and ERROR. Be aware that logging at DEBUG level can be very verbose.
#dbms.logs.debug.level=INFO
# Size threshold for rotation of the debug log. If set to zero then no rotation will occur. Accepts a binary suffix "k",
# "m" or "g".
#dbms.logs.debug.rotation.size=20m
# Maximum number of history files for the internal log.
#dbms.logs.debug.rotation.keep_number=7
#*****************************************************************
# Miscellaneous configuration
#*****************************************************************
# Enable this to specify a parser other than the default one.
#cypher.default_language_version=2.3
# Determines if Cypher will allow using file URLs when loading data using
# `LOAD CSV`. Setting this value to `false` will cause Neo4j to fail `LOAD CSV`
# clauses that load data from the file system.
dbms.security.allow_csv_import_from_file_urls=true
# Value of the Access-Control-Allow-Origin header sent over any HTTP or HTTPS
# connector. This defaults to '*', which allows broadest compatibility. Note
# that any URI provided here limits HTTP/HTTPS access to that URI only.
#dbms.security.http_access_control_allow_origin=*
# Value of the HTTP Strict-Transport-Security (HSTS) response header. This header
# tells browsers that a webpage should only be accessed using HTTPS instead of HTTP.
# It is attached to every HTTPS response. Setting is not set by default so
# 'Strict-Transport-Security' header is not sent. Value is expected to contain
# directives like 'max-age', 'includeSubDomains' and 'preload'.
#dbms.security.http_strict_transport_security=
# Retention policy for transaction logs needed to perform recovery and backups.
dbms.tx_log.rotation.retention_policy=1 days
# Only allow read operations from this Neo4j instance. This mode still requires
# write access to the directory for lock purposes.
dbms.read_only=false
# Comma separated list of JAX-RS packages containing JAX-RS resources, one
# package name for each mountpoint. The listed package names will be loaded
# under the mountpoints specified. Uncomment this line to mount the
# org.neo4j.examples.server.unmanaged.HelloWorldResource.java from
# neo4j-server-examples under /examples/unmanaged, resulting in a final URL of
# http://localhost:7474/examples/unmanaged/helloworld/{nodeId}
#dbms.unmanaged_extension_classes=org.neo4j.examples.server.unmanaged=/examples/unmanaged
# A comma separated list of procedures and user defined functions that are allowed
# full access to the database through unsupported/insecure internal APIs.
#dbms.security.procedures.unrestricted=my.extensions.example,my.procedures.*
# A comma separated list of procedures to be loaded by default.
# Leaving this unconfigured will load all procedures found.
#dbms.security.procedures.whitelist=apoc.coll.*,apoc.load.*
#********************************************************************
# JVM Parameters
#********************************************************************
# G1GC generally strikes a good balance between throughput and tail
# latency, without too much tuning.
dbms.jvm.additional=-XX:+UseG1GC
# Have common exceptions keep producing stack traces, so they can be
# debugged regardless of how often logs are rotated.
dbms.jvm.additional=-XX:-OmitStackTraceInFastThrow
# Make sure that `initmemory` is not only allocated, but committed to
# the process, before starting the database. This reduces memory
# fragmentation, increasing the effectiveness of transparent huge
# pages. It also reduces the possibility of seeing performance drop
# due to heap-growing GC events, where a decrease in available page
# cache leads to an increase in mean IO response time.
# Try reducing the heap memory, if this flag degrades performance.
dbms.jvm.additional=-XX:+AlwaysPreTouch
# Trust that non-static final fields are really final.
# This allows more optimizations and improves overall performance.
# NOTE: Disable this if you use embedded mode, or have extensions or dependencies that may use reflection or
# serialization to change the value of final fields!
dbms.jvm.additional=-XX:+UnlockExperimentalVMOptions
dbms.jvm.additional=-XX:+TrustFinalNonStaticFields
# Disable explicit garbage collection, which is occasionally invoked by the JDK itself.
dbms.jvm.additional=-XX:+DisableExplicitGC
# Remote JMX monitoring, uncomment and adjust the following lines as needed. Absolute paths to jmx.access and
# jmx.password files are required.
# Also make sure to update the jmx.access and jmx.password files with appropriate permission roles and passwords,
# the shipped configuration contains only a read only role called 'monitor' with password 'Neo4j'.
# For more details, see: http://download.oracle.com/javase/8/docs/technotes/guides/management/agent.html
# On Unix based systems the jmx.password file needs to be owned by the user that will run the server,
# and have permissions set to 0600.
# For details on setting these file permissions on Windows see:
# http://docs.oracle.com/javase/8/docs/technotes/guides/management/security-windows.html
#dbms.jvm.additional=-Dcom.sun.management.jmxremote.port=3637
#dbms.jvm.additional=-Dcom.sun.management.jmxremote.authenticate=true
#dbms.jvm.additional=-Dcom.sun.management.jmxremote.ssl=false
#dbms.jvm.additional=-Dcom.sun.management.jmxremote.password.file=/absolute/path/to/conf/jmx.password
#dbms.jvm.additional=-Dcom.sun.management.jmxremote.access.file=/absolute/path/to/conf/jmx.access
# Some systems cannot discover host name automatically, and need this line configured:
#dbms.jvm.additional=-Djava.rmi.server.hostname=$THE_NEO4J_SERVER_HOSTNAME
# Expand Diffie Hellman (DH) key size from default 1024 to 2048 for DH-RSA cipher suites used in server TLS handshakes.
# This is to protect the server from any potential passive eavesdropping.
dbms.jvm.additional=-Djdk.tls.ephemeralDHKeySize=2048
# This mitigates a DDoS vector.
dbms.jvm.additional=-Djdk.tls.rejectClientInitiatedRenegotiation=true
# This filter prevents deserialization of arbitrary objects via java object serialization, addressing potential vulnerabilities.
# By default this filter whitelists all neo4j classes, as well as classes from the hazelcast library and the java standard library.
# These defaults should only be modified by expert users!
# For more details (including filter syntax) see: https://openjdk.java.net/jeps/290
#dbms.jvm.additional=-Djdk.serialFilter=java.**;org.neo4j.**;com.neo4j.**;com.hazelcast.**;net.sf.ehcache.Element;com.sun.proxy.*;org.openjdk.jmh.**;!*
#********************************************************************
# Wrapper Windows NT/2000/XP Service Properties
#********************************************************************
# WARNING - Do not modify any of these properties when an application
# using this configuration file has been installed as a service.
# Please uninstall the service before modifying this section. The
# service can then be reinstalled.
# Name of the service
dbms.windows_service_name=neo4j
#********************************************************************
# Other Neo4j system properties
#********************************************************************
dbms.jvm.additional=-Dunsupported.dbms.udc.source=tarball
启动:
进入bin目录执行./neo4j start
停止:
进入bin目录执行./neo4j stop
客户端访问:
http://服务器ip地址:7474/browser/
在浏览器访问图数据库所在的机器上的7474端口（第一次访问账号neo4j，密码neo4j，会提示修改初始密码)，即可进入操作页面。
我在北国不背锅
发布了62 篇原创文章 · 获赞 3 · 访问量 6464
私信
关注
标签：dbms,logs,default,Linux,neo4j,connector,服务器,policy,Neo4j 来源： https://blog.csdn.net/weixin_44455388/article/details/104534693
本站声明： 1. iCode9 技术分享网（下文简称本站）提供的所有内容，仅供技术学习、探讨和分享； 2. 关于本站的所有留言、评论、转载及引用，纯属内容发起人的个人观点，与本站观点和立场无关； 3. 关于本站的所有言论和文字，纯属内容发起人的个人观点，与本站观点和立场无关； 4. 本站文章均是网友提供，不完全保证技术分享内容的完整性、准确性、时效性、风险性和版权归属；如您发现该文章侵犯了您的权益，可联系我们第一时间进行删除； 5. 本站为非盈利性的个人网站，所有内容不会用来进行牟利，也不会利用任何形式的广告来间接获益，纯粹是为了广大技术爱好者提供技术内容和技术思想的分享性交流网站。