windows配置skywalking集群

2022-07-14 17:06:33 阅读：169 来源： 互联网

标签：node 127.0 cluster windows zookeeper SW 0.1 集群 skywalking

一、zookeeper

准备配置三个zookeeper，因为我是单台模拟，所以需要使用不同的端口，使用版本是apache-zookeeper-3.6.3-bin （必须是3.5+）

1、第1个zookeeper

vi conf/zoo.cfg

修改 dataDir 带指定目录下的

# The number of milliseconds of each tick
tickTime=2000
# The number of ticks that the initial 
# synchronization phase can take
initLimit=10
# The number of ticks that can pass between 
# sending a request and getting an acknowledgement
syncLimit=5
# the directory where the snapshot is stored.
# do not use /tmp for storage, /tmp here is just 
# example sakes.
dataDir=H:\\ruanjian\\apache-zookeeper-3.6.3-bin\\apache-zookeeper-3.6.3-bin\\tmp\\zookeeper
# the port at which the clients will connect
clientPort=2181
# the maximum number of client connections.
# increase this if you need to handle more clients
#maxClientCnxns=60
#
# Be sure to read the maintenance section of the 
# administrator guide before turning on autopurge.
#
# http://zookeeper.apache.org/doc/current/zookeeperAdmin.html#sc_maintenance
#
# The number of snapshots to retain in dataDir
#autopurge.snapRetainCount=3
# Purge task interval in hours
# Set to "0" to disable auto purge feature
#autopurge.purgeInterval=1

## Metrics Providers
#
# https://prometheus.io Metrics Exporter
#metricsProvider.className=org.apache.zookeeper.metrics.prometheus.PrometheusMetricsProvider
#metricsProvider.httpPort=7000
#metricsProvider.exportJvmInfo=true
server.1=127.0.0.1:3888:2888
server.2=127.0.0.1:3788:2788
server.3=127.0.0.1:3688:2688

在这个对应的tmp\zookeeper 生成一个myid 里面的值是 1

可以用命令生成

echo 1 >目录/myid

2、第2个zookeeper

vi conf/zoo.cfg

修改 dataDir 带指定目录下的

修改 clientPort 、dataDir ，新增

server.1=127.0.0.1:3888:2888
server.2=127.0.0.1:3788:2788
server.3=127.0.0.1:3688:2688

# The number of milliseconds of each tick
tickTime=2000
# The number of ticks that the initial 
# synchronization phase can take
initLimit=10
# The number of ticks that can pass between 
# sending a request and getting an acknowledgement
syncLimit=5
# the directory where the snapshot is stored.
# do not use /tmp for storage, /tmp here is just 
# example sakes.
dataDir=H:\\ruanjian\\apache-zookeeper-3.6.3-bin-2\\apache-zookeeper-3.6.3-bin\\tmp\\zookeeper
# the port at which the clients will connect
clientPort=2182
# the maximum number of client connections.
# increase this if you need to handle more clients
#maxClientCnxns=60
#
# Be sure to read the maintenance section of the 
# administrator guide before turning on autopurge.
#
# http://zookeeper.apache.org/doc/current/zookeeperAdmin.html#sc_maintenance
#
# The number of snapshots to retain in dataDir
#autopurge.snapRetainCount=3
# Purge task interval in hours
# Set to "0" to disable auto purge feature
#autopurge.purgeInterval=1

## Metrics Providers
#
# https://prometheus.io Metrics Exporter
#metricsProvider.className=org.apache.zookeeper.metrics.prometheus.PrometheusMetricsProvider
#metricsProvider.httpPort=7000
#metricsProvider.exportJvmInfo=true
server.1=127.0.0.1:3888:2888
server.2=127.0.0.1:3788:2788
server.3=127.0.0.1:3688:2688

2.2

在这个对应的tmp\zookeeper 生成一个myid 里面的值是 2

可以用命令生成

echo 2 >目录/myid

3、第3台zookeeper

vi conf/zoo.cfg

修改 dataDir 带指定目录下的

修改 clientPort 、dataDir ，新增

server.1=127.0.0.1:3888:2888
server.2=127.0.0.1:3788:2788
server.3=127.0.0.1:3688:2688

# The number of milliseconds of each tick
tickTime=2000
# The number of ticks that the initial 
# synchronization phase can take
initLimit=10
# The number of ticks that can pass between 
# sending a request and getting an acknowledgement
syncLimit=5
# the directory where the snapshot is stored.
# do not use /tmp for storage, /tmp here is just 
# example sakes.
dataDir=H:\\ruanjian\\apache-zookeeper-3.6.3-bin-3\\apache-zookeeper-3.6.3-bin\\tmp\\zookeeper
# the port at which the clients will connect
clientPort=2183
# the maximum number of client connections.
# increase this if you need to handle more clients
#maxClientCnxns=60
#
# Be sure to read the maintenance section of the 
# administrator guide before turning on autopurge.
#
# http://zookeeper.apache.org/doc/current/zookeeperAdmin.html#sc_maintenance
#
# The number of snapshots to retain in dataDir
#autopurge.snapRetainCount=3
# Purge task interval in hours
# Set to "0" to disable auto purge feature
#autopurge.purgeInterval=1

## Metrics Providers
#
# https://prometheus.io Metrics Exporter
#metricsProvider.className=org.apache.zookeeper.metrics.prometheus.PrometheusMetricsProvider
#metricsProvider.httpPort=7000
#metricsProvider.exportJvmInfo=true
server.1=127.0.0.1:3888:2888
server.2=127.0.0.1:3788:2788
server.3=127.0.0.1:3688:2688

3.2

在这个对应的tmp\zookeeper 生成一个myid 里面的值是 3

可以用命令生成

echo 3 >目录/myid

二、elasticsearch 集群

准备单台电脑部署三个集群，使用的 elasticsearch-7.6.1-windows-x86_64 版本

1、第1个，修改 config/elasticsearch.yml

设置node-1为主节点，另外设置可以跨域访问

# ======================== Elasticsearch Configuration =========================
#
# NOTE: Elasticsearch comes with reasonable defaults for most settings.
#       Before you set out to tweak and tune the configuration, make sure you
#       understand what are you trying to accomplish and the consequences.
#
# The primary way of configuring a node is via this file. This template lists
# the most important settings you may want to configure for a production cluster.
#
# Please consult the documentation for further information on configuration options:
# https://www.elastic.co/guide/en/elasticsearch/reference/index.html
#
# ---------------------------------- Cluster -----------------------------------
#
# Use a descriptive name for your cluster:
#
cluster.name: esapp
#
# ------------------------------------ Node ------------------------------------
#
# Use a descriptive name for the node:
#
node.name: node-1
node.master: true
node.data: true
#
# Add custom attributes to the node:
#
#node.attr.rack: r1
#
# ----------------------------------- Paths ------------------------------------
#
# Path to directory where to store the data (separate multiple locations by comma):
#
#path.data: /path/to/data
#
# Path to log files:
#
#path.logs: /path/to/logs
#
# ----------------------------------- Memory -----------------------------------
#
# Lock the memory on startup:
#
#bootstrap.memory_lock: true
#
# Make sure that the heap size is set to about half the memory available
# on the system and that the owner of the process is allowed to use this
# limit.
#
# Elasticsearch performs poorly when the system is swapping the memory.
#
# ---------------------------------- Network -----------------------------------
#
# Set the bind address to a specific IP (IPv4 or IPv6):
#
network.host: 0.0.0.0
#
# Set a custom port for HTTP:
#
http.port: 9200
transport.port: 9300
#
# For more information, consult the network module documentation.
#
# --------------------------------- Discovery ----------------------------------
#
# Pass an initial list of hosts to perform discovery when this node is started:
# The default list of hosts is ["127.0.0.1", "[::1]"]
#
discovery.seed_hosts: ["127.0.0.1:9300","127.0.0.1:9302","127.0.0.1:9303"]
#
# Bootstrap the cluster using an initial set of master-eligible nodes:
#
cluster.initial_master_nodes: ["node-1"]
#
# For more information, consult the discovery and cluster formation module documentation.
#
# ---------------------------------- Gateway -----------------------------------
#
# Block initial recovery after a full cluster restart until N nodes are started:
#
#gateway.recover_after_nodes: 3
#
# For more information, consult the gateway module documentation.
#
# ---------------------------------- Various -----------------------------------
#
# Require explicit names when deleting indices:
#
#action.destructive_requires_name: true
http.cors.enabled: true
http.cors.allow-origin: "*"

2、第2个，修改 config/elasticsearch.yml

# ======================== Elasticsearch Configuration =========================
#
# NOTE: Elasticsearch comes with reasonable defaults for most settings.
#       Before you set out to tweak and tune the configuration, make sure you
#       understand what are you trying to accomplish and the consequences.
#
# The primary way of configuring a node is via this file. This template lists
# the most important settings you may want to configure for a production cluster.
#
# Please consult the documentation for further information on configuration options:
# https://www.elastic.co/guide/en/elasticsearch/reference/index.html
#
# ---------------------------------- Cluster -----------------------------------
#
# Use a descriptive name for your cluster:
#
cluster.name: esapp
#
# ------------------------------------ Node ------------------------------------
#
# Use a descriptive name for the node:
#
node.name: node-2
node.master: false
node.data: true
#
# Add custom attributes to the node:
#
#node.attr.rack: r1
#
# ----------------------------------- Paths ------------------------------------
#
# Path to directory where to store the data (separate multiple locations by comma):
#
#path.data: /path/to/data
#
# Path to log files:
#
#path.logs: /path/to/logs
#
# ----------------------------------- Memory -----------------------------------
#
# Lock the memory on startup:
#
#bootstrap.memory_lock: true
#
# Make sure that the heap size is set to about half the memory available
# on the system and that the owner of the process is allowed to use this
# limit.
#
# Elasticsearch performs poorly when the system is swapping the memory.
#
# ---------------------------------- Network -----------------------------------
#
# Set the bind address to a specific IP (IPv4 or IPv6):
#
network.host: 0.0.0.0
#
# Set a custom port for HTTP:
#
http.port: 9202
transport.port: 9302
#
# For more information, consult the network module documentation.
#
# --------------------------------- Discovery ----------------------------------
#
# Pass an initial list of hosts to perform discovery when this node is started:
# The default list of hosts is ["127.0.0.1", "[::1]"]
#
discovery.seed_hosts: ["127.0.0.1:9300","127.0.0.1:9302","127.0.0.1:9303"]
#
# Bootstrap the cluster using an initial set of master-eligible nodes:
#
cluster.initial_master_nodes: ["node-1"]
#
# For more information, consult the discovery and cluster formation module documentation.
#
# ---------------------------------- Gateway -----------------------------------
#
# Block initial recovery after a full cluster restart until N nodes are started:
#
#gateway.recover_after_nodes: 3
#
# For more information, consult the gateway module documentation.
#
# ---------------------------------- Various -----------------------------------
#
# Require explicit names when deleting indices:
#
#action.destructive_requires_name: true
http.cors.enabled: true
http.cors.allow-origin: "*"

3、第3个，修改 config/elasticsearch.yml

# ======================== Elasticsearch Configuration =========================
#
# NOTE: Elasticsearch comes with reasonable defaults for most settings.
#       Before you set out to tweak and tune the configuration, make sure you
#       understand what are you trying to accomplish and the consequences.
#
# The primary way of configuring a node is via this file. This template lists
# the most important settings you may want to configure for a production cluster.
#
# Please consult the documentation for further information on configuration options:
# https://www.elastic.co/guide/en/elasticsearch/reference/index.html
#
# ---------------------------------- Cluster -----------------------------------
#
# Use a descriptive name for your cluster:
#
cluster.name: esapp
#
# ------------------------------------ Node ------------------------------------
#
# Use a descriptive name for the node:
#
node.name: node-3
node.master: false
node.data: true
#
# Add custom attributes to the node:
#
#node.attr.rack: r1
#
# ----------------------------------- Paths ------------------------------------
#
# Path to directory where to store the data (separate multiple locations by comma):
#
#path.data: /path/to/data
#
# Path to log files:
#
#path.logs: /path/to/logs
#
# ----------------------------------- Memory -----------------------------------
#
# Lock the memory on startup:
#
#bootstrap.memory_lock: true
#
# Make sure that the heap size is set to about half the memory available
# on the system and that the owner of the process is allowed to use this
# limit.
#
# Elasticsearch performs poorly when the system is swapping the memory.
#
# ---------------------------------- Network -----------------------------------
#
# Set the bind address to a specific IP (IPv4 or IPv6):
#
network.host: 0.0.0.0
#
# Set a custom port for HTTP:
#
http.port: 9203
transport.port: 9303
#
# For more information, consult the network module documentation.
#
# --------------------------------- Discovery ----------------------------------
#
# Pass an initial list of hosts to perform discovery when this node is started:
# The default list of hosts is ["127.0.0.1", "[::1]"]
#
discovery.seed_hosts: ["127.0.0.1:9300","127.0.0.1:9302","127.0.0.1:9303"]
#
# Bootstrap the cluster using an initial set of master-eligible nodes:
#
cluster.initial_master_nodes: ["node-1"]
#
# For more information, consult the discovery and cluster formation module documentation.
#
# ---------------------------------- Gateway -----------------------------------
#
# Block initial recovery after a full cluster restart until N nodes are started:
#
#gateway.recover_after_nodes: 3
#
# For more information, consult the gateway module documentation.
#
# ---------------------------------- Various -----------------------------------
#
# Require explicit names when deleting indices:
#
#action.destructive_requires_name: true
http.cors.enabled: true
http.cors.allow-origin: "*"

三、apache-skywalking-apm

1、设置第1台，apache-skywalking-apm

1.1修改 config/application.yml

cluster.selector 设置为zookeeper

修改cluster.zookeeper.namespace 和 cluster.zookeeper.hostPort

cluster:
  selector: ${SW_CLUSTER:zookeeper}
  standalone:
  # Please check your ZooKeeper is 3.5+, However, it is also compatible with ZooKeeper 3.4.x. Replace the ZooKeeper 3.5+
  # library the oap-libs folder with your ZooKeeper 3.4.x library.
  zookeeper:
    namespace: ${SW_NAMESPACE:"skywalking"}
    #hostPort: ${SW_CLUSTER_ZK_HOST_PORT:localhost:2181}
    hostPort: ${SW_CLUSTER_ZK_HOST_PORT:localhost:2181,localhost:2182,localhost:2183}

设置 storage.selector 为 elasticsearch （我这个版本的apm及时使用elasticsearch7也是设置这个）

修改storage.elasticsearch.namespace 和storage.elasticsearch.clusterNodes

storage:
  selector: ${SW_STORAGE:elasticsearch}
  elasticsearch:
    namespace: ${SW_NAMESPACE:"esapp"}
    clusterNodes: ${SW_STORAGE_ES_CLUSTER_NODES:localhost:9200,localhost:9202,localhost:9203}

1.2 修改webapp/webapp.yml

修改 server.port 的端口为8090(因为8080已被其它程序占用)

server:
  port: 8090

2、设置第2台，apache-skywalking-apm

2.1 修改 config/application.yml

cluster.selector 设置为zookeeper

修改cluster.zookeeper.namespace 和 cluster.zookeeper.hostPort

cluster:
  selector: ${SW_CLUSTER:zookeeper}
  standalone:
  # Please check your ZooKeeper is 3.5+, However, it is also compatible with ZooKeeper 3.4.x. Replace the ZooKeeper 3.5+
  # library the oap-libs folder with your ZooKeeper 3.4.x library.
  zookeeper:
    namespace: ${SW_NAMESPACE:"skywalking"}
    #hostPort: ${SW_CLUSTER_ZK_HOST_PORT:localhost:2181}
    hostPort: ${SW_CLUSTER_ZK_HOST_PORT:localhost:2181,localhost:2182,localhost:2183}

设置 storage.selector 为 elasticsearch （我这个版本的apm及时使用elasticsearch7也是设置这个）

修改storage.elasticsearch.namespace 和storage.elasticsearch.clusterNodes

storage:
  selector: ${SW_STORAGE:elasticsearch}
  elasticsearch:
    namespace: ${SW_NAMESPACE:"esapp"}
    clusterNodes: ${SW_STORAGE_ES_CLUSTER_NODES:localhost:9200,localhost:9202,localhost:9203}

设置core.default.restPort 为 22800 和core.default.gRPCPort 为 21800

core:
  selector: ${SW_CORE:default}
  default:
    # Mixed: Receive agent data, Level 1 aggregate, Level 2 aggregate
    # Receiver: Receive agent data, Level 1 aggregate
    # Aggregator: Level 2 aggregate
    role: ${SW_CORE_ROLE:Mixed} # Mixed/Receiver/Aggregator
    restHost: ${SW_CORE_REST_HOST:0.0.0.0}
    restPort: ${SW_CORE_REST_PORT:22800}
    restContextPath: ${SW_CORE_REST_CONTEXT_PATH:/}
    restMinThreads: ${SW_CORE_REST_JETTY_MIN_THREADS:1}
    restMaxThreads: ${SW_CORE_REST_JETTY_MAX_THREADS:200}
    restIdleTimeOut: ${SW_CORE_REST_JETTY_IDLE_TIMEOUT:30000}
    restAcceptorPriorityDelta: ${SW_CORE_REST_JETTY_DELTA:0}
    restAcceptQueueSize: ${SW_CORE_REST_JETTY_QUEUE_SIZE:0}
    httpMaxRequestHeaderSize: ${SW_CORE_HTTP_MAX_REQUEST_HEADER_SIZE:8192}
    gRPCHost: ${SW_CORE_GRPC_HOST:0.0.0.0}
    gRPCPort: ${SW_CORE_GRPC_PORT:21800}

2.2 修改webapp/webapp.yml

修改 server.port 的端口为8090(因为8080已被其它程序占用)

server:
  port: 8091

四、java 设置agent代理（apache-skywalking-java-agent-8.8.0）

-javaagent:H:\ruanjian\apache-skywalking-java-agent-8.8.0\skywalking-agent\skywalking-agent.jar
-Dskywalking.agent.service_name=Your_ApplicationName
-Dskywalking.collector.backend_service=127.0.0.1:11800,127.0.0.1:21800

标签：node,127.0,cluster,windows,zookeeper,SW,0.1,集群,skywalking
来源： https://www.cnblogs.com/zhian/p/16478339.html

本站声明： 1. iCode9 技术分享网（下文简称本站）提供的所有内容，仅供技术学习、探讨和分享；
2. 关于本站的所有留言、评论、转载及引用，纯属内容发起人的个人观点，与本站观点和立场无关；
3. 关于本站的所有言论和文字，纯属内容发起人的个人观点，与本站观点和立场无关；
4. 本站文章均是网友提供，不完全保证技术分享内容的完整性、准确性、时效性、风险性和版权归属；如您发现该文章侵犯了您的权益，可联系我们第一时间进行删除；
5. 本站为非盈利性的个人网站，所有内容不会用来进行牟利，也不会利用任何形式的广告来间接获益，纯粹是为了广大技术爱好者提供技术内容和技术思想的分享性交流网站。

ICode9

windows配置skywalking集群

一、zookeeper

二、elasticsearch 集群