首页 > 数据库> 文章详细

Linux两节点+keepalive搭建MySQL双主集群

2021-02-03 17:02:36 阅读：231 来源： 互联网

标签：Linux MySQL keepalived 192.168 replication master mysql root 双主

----Linux 6配置方法
环境描述：
OS：RHEL6.6_X64
MySQL-VIP：192.168.142.150
MySQL-master1：192.168.142.141
MySQL-master2：192.168.142.142
1、配置两台Mysql主主同步
[root@m1 ~]# yum install mysql-server mysql -y
[root@m1 ~]# service mysqld start
[root@m1 ~]# mysqladmin -u root Ins_9988
[root@m1 ~]# vi /etc/my.cnf #开启二进制日志，设置id
[mysqld]
server-id = 141 #backup这台设置142
log-bin = mysql-bin
binlog-ignore-db = mysql,information_schema #忽略写入binlog日志的库
auto-increment-increment = 2 #字段变化增量值
auto-increment-offset = 1 #初始字段ID为1
slave-skip-errors = all #忽略所有复制产生的错误

[root@master ~]# service mysqld restart

[root@m1 mysql]# mysql -uroot -pIns_9988
mysql: [Warning] Using a password on the command line interface can be insecure.
Welcome to the MySQL monitor. Commands end with ; or \g.
Your MySQL connection id is 3
Server version: 5.7.30-enterprise-commercial-advanced-log MySQL Enterprise Server - Advanced Edition (Commercial)

Oracle is a registered trademark of Oracle Corporation and/or its
affiliates. Other names may be trademarks of their respective
owners.

Type 'help;' or '\h' for help. Type '\c' to clear the current input statement.

mysql>

MySQL主从配置如下：

[root@ m1 ~]# mysql -u root -pIns_9988
mysql> GRANT REPLICATION SLAVE ON *.* TO 'replication'@'192.168.142.142' IDENTIFIED BY 'replication';
mysql> flush privileges;
mysql> change master to
master_host='192.168.142.142',
master_user='replication',
master_password='replication',
master_log_file='mysql-bin.000004',
master_log_pos=154; #对端状态显示的值
mysql> start slave; #启动同步

[root@m2 ~]# mysql -u root -pIns_9988
mysql> GRANT REPLICATION SLAVE ON *.* TO 'replication'@'192.168.142.141' IDENTIFIED BY 'replication';
mysql> flush privileges;
mysql> change master to
master_host='192.168.142.141',
master_user='replication',
master_password='replication',
master_log_file='mysql-bin.000004',
master_log_pos=154;
mysql> start slave;

----keepalived安装
configure: error:
!!! OpenSSL is not properly installed on your system. !!!
!!! Can not include OpenSSL headers files. !!!

yum -y install openssl-devel

tar -xzvf keepalived-2.1.3.tar.gz
cd keepalived-2.1.3
./configure --prefix=/usr/local/keepalived

make
make install

---将keepalived配置成系统服务
cp /root/keepalived-2.1.3/keepalived/etc/init.d/keepalived /etc/init.d/
chmod +x /etc/init.d/keepalived

cp /usr/local/keepalived/etc/sysconfig/keepalived /etc/sysconfig/
chkconfig --add keepalived
chkconfig keepalived on

cp /usr/local/keepalived/etc/keepalived/keepalived.conf /etc/keepalived/
cp /usr/local/keepalived/sbin/keepalived /usr/sbin/

---配置keepalived
192.168.142.141上面：
vi /etc/keepalived/keepalived.conf

global_defs {
router_id MYSQL_HA #标识，双主相同
}

vrrp_instance VI_1 {
state BACKUP #两台配置此处均是BACKUP
interface eth0
virtual_router_id 51 #主备相同
priority 100 #优先级，另一台backup改为90
advert_int 1
nopreempt #不抢占，只在优先级高master的机器上设置即可，优先级低backup的机器不设置
authentication {
auth_type PASS
auth_pass 1111
}
virtual_ipaddress {
192.168.142.150
}
}

virtual_server 192.168.142.150 3306 {
delay_loop 2 #每个2秒检查一次real_server状态
#lb_algo wrr #LVS算法，用不到，我们就关闭了
#lb_kind DR #LVS模式,如果不关闭，备用服务器不能通过VIP连接主MySQL
persistence_timeout 60 #会话保持时间，同一IP的连接60秒内被分配到同一台真实服务器
protocol TCP
real_server 192.168.142.141 3306 { #检测本地mysql，backup也要写检测本地mysql
weight 3
notify_down /usr/local/keepalived/mysql.sh #当mysq服down时，执行此脚本，杀死keepalived实现切换
TCP_CHECK {
connect_timeout 10 #连接超时时间
nb_get_retry 3 #重连次数
delay_before_retry 3 #重连间隔时间
connect_port 3306 #健康检查端口
}
}
}

192.168.142.142上面：
vi /etc/keepalived/keepalived.conf

global_defs {
router_id MYSQL_HA #标识，双主相同
}

vrrp_instance VI_1 {
state BACKUP #两台配置此处均是BACKUP
interface eth0
virtual_router_id 51 #主备相同
priority 90 #优先级，另一台backup改为90
advert_int 1
nopreempt #不抢占，只在优先级高master的机器上设置即可，优先级低backup的机器不设置
authentication {
auth_type PASS
auth_pass 1111
}
virtual_ipaddress {
192.168.142.150
}
}

virtual_server 192.168.142.150 3306 {
delay_loop 2 #每个2秒检查一次real_server状态
#lb_algo wrr #LVS算法，用不到，我们就关闭了
#lb_kind DR #LVS模式,如果不关闭，备用服务器不能通过VIP连接主MySQL
persistence_timeout 60 #会话保持时间，同一IP的连接60秒内被分配到同一台真实服务器
protocol TCP
real_server 192.168.142.142 3306 { #检测本地mysql，backup也要写检测本地mysql
weight 3
notify_down /usr/local/keepalived/mysql.sh #当mysq服down时，执行此脚本，杀死keepalived实现切换
TCP_CHECK {
connect_timeout 10 #连接超时时间
nb_get_retry 3 #重连次数
delay_before_retry 3 #重连间隔时间
connect_port 3306 #健康检查端口
}
}
}

vi /usr/local/keepalived/mysql.sh
#!/bin/bash
pkill keepalived

-----查看server_id uuid等参数
SHOW VARIABLES LIKE '%server_%';

----Linux 7版本配置方法

MySQL配置文件需添加如下配置：

vi /etc/my.cnf
###################Add for Master-Slave MySQL######################
[mysqld]
server-id = 1 #backup这台设置2
log-bin = mysql-bin
binlog-ignore-db = mysql,information_schema,sys #忽略写入binlog日志的库
auto-increment-increment = 2 #字段变化增量值
auto-increment-offset = 1 #初始字段ID为1
slave-skip-errors = all #忽略所有复制产生的错误

###################Add for Master-Slave MySQL######################

service mysqld restart

MySQL主从配置：

[root@ hostname1~]# mysql -u root -pIns_9988
mysql> CREATE USER 'replication'@'192.168.100.129' IDENTIFIED WITH mysql_native_password BY 'Rep_9988';
mysql> GRANT REPLICATION SLAVE ON *.* TO 'replication'@'192.168.100.129';
mysql> flush privileges;
mysql> change master to
master_host='192.168.100.129',
master_user='replication',
master_password='Rep_9988',
master_log_file='mysql-bin.000001',
master_log_pos=155; #对端状态显示的值
mysql> start slave; #启动同步

[root@hostname2 ~]# mysql -u root -pIns_9988
mysql> CREATE USER 'replication'@'192.168.100.128' IDENTIFIED WITH mysql_native_password BY 'Rep_9988';
mysql> GRANT REPLICATION SLAVE ON *.* TO 'replication'@'192.168.100.128';
mysql> flush privileges;
mysql> change master to
master_host='192.168.100.128',
master_user='replication',
master_password='Rep_9988',
master_log_file='mysql-bin.000001',
master_log_pos=155;
mysql> start slave;

标签：Linux,MySQL,keepalived,192.168,replication,master,mysql,root,双主
来源： https://www.cnblogs.com/guaika/p/14367918.html

本站声明： 1. iCode9 技术分享网（下文简称本站）提供的所有内容，仅供技术学习、探讨和分享；
2. 关于本站的所有留言、评论、转载及引用，纯属内容发起人的个人观点，与本站观点和立场无关；
3. 关于本站的所有言论和文字，纯属内容发起人的个人观点，与本站观点和立场无关；
4. 本站文章均是网友提供，不完全保证技术分享内容的完整性、准确性、时效性、风险性和版权归属；如您发现该文章侵犯了您的权益，可联系我们第一时间进行删除；
5. 本站为非盈利性的个人网站，所有内容不会用来进行牟利，也不会利用任何形式的广告来间接获益，纯粹是为了广大技术爱好者提供技术内容和技术思想的分享性交流网站。

ICode9

Linux两节点+keepalive搭建MySQL双主集群