标签：oracle11.2 ip6tables 0.4 11.2 PRCF grid ipv6 net root
redhat6.9安装oracle11.2.0.4 执行root.sh脚本，发现scp文件至节点2无法传输报错
INFO: /tmp/OraInstall2020-05-04_11-56-08PM/mvstubs.sh INFO: Copying Oracle home '/u01/app/11.2.0/grid' to remote nodes 'wsgw2'. INFO: Copying Oracle home '/u01/app/11.2.0/grid' to remote nodes 'wsgw2'. WARNING: Error while copying directory /u01/app/11.2.0/grid with exclude file list '/tmp/OraInstall2020-05-04_11-56-08PM/installExcludeFile.lst'
to nodes 'wsgw2'. [PRCF-2010 : All connections to the remote nodes got refused. Cannot proceed with the file transfer.
There has to be at least one remote node to send the installer files! PRCF-2010 : All connections to the remote nodes got refused. Cannot proceed with the file transfer. There has to be at least one
remote node to send the installer files!] Refer to '/u01/app/oraInventory/logs/installActions2020-05-04_11-56-08PM.log' for details. You may fix the errors on the
required remote nodes. Refer to the install guide for error recovery. Click 'Yes' if you want to proceed. Click 'No'
to exit the install. Do you want to continue?
查询MOS
Linux: GI installation fails as bindv6only is set to 1: "PRCF-2010 :
All connections to the remote nodes got refused. Cannot proceed with the file transfer" (Doc ID 1999296.1) The firewall is disabled and hence not the cause of the connections being refused 虽然版本不太匹配，MOS是12.1 但是其中有关于ip6tables!!! root@node1:~$ /etc/init.d/iptables status iptables: Firewall is not running. root@node1:~$ /etc/init.d/ip6tables status ip6tables: Firewall is not running. root@node2:~$ /etc/init.d/iptables status iptables: Firewall is not running. root@node2:~$ /etc/init.d/ip6tables status ip6tables: Firewall is not running. SOLUTION The issue is caused by the kernel parameter net.ipv6.bindv6only being set to 1 as seen below grid@node1:~> sysctl net.ipv6.bindv6only net.ipv6.bindv6only = 1 grid@node1:~> The solution is to set net.ipv6.bindv6only to 0 and install the Grid Infrastructure software node1:~ # sysctl net.ipv6.bindv6only=0 net.ipv6.bindv6only = 0 node1:~ #
实际环境检测
系统安装redhat6.9 防火墙已关闭，但是对于ipv6的服务并未关闭！！！ 因此是这个问题导致的，关闭ipv6服务后，ok 两个节点都要操作
[root@wsgw1 CVU_11.2.0.4.0_grid]# /etc/init.d/iptables status iptables: Firewall is not running. [root@wsgw1 CVU_11.2.0.4.0_grid]# sysctl net.ipv6.bindv6only net.ipv6.bindv6only = 0 [root@wsgw1 CVU_11.2.0.4.0_grid]# [root@wsgw1 CVU_11.2.0.4.0_grid]# [root@wsgw1 CVU_11.2.0.4.0_grid]# sysctl -a|grep -i 'ipv6'|grep 'disable' net.ipv6.conf.all.disable_ipv6 = 0 net.ipv6.conf.default.disable_ipv6 = 0 net.ipv6.conf.eth0.disable_ipv6 = 0 net.ipv6.conf.eth1.disable_ipv6 = 0 net.ipv6.conf.lo.disable_ipv6 = 0 [root@wsgw1 CVU_11.2.0.4.0_grid]# /etc/init.d/ip6tables status Table: filter Chain INPUT (policy ACCEPT) num target prot opt source destination 1 ACCEPT all ::/0 ::/0 state RELATED,ESTABLISHED 2 ACCEPT icmpv6 ::/0 ::/0 3 ACCEPT all ::/0 ::/0 4 ACCEPT udp ::/0 fe80::/64 state NEW udp dpt:546 5 ACCEPT tcp ::/0 ::/0 state NEW tcp dpt:22 6 REJECT all ::/0 ::/0 reject-with icmp6-adm-prohibited Chain FORWARD (policy ACCEPT) num target prot opt source destination 1 REJECT all ::/0 ::/0 reject-with icmp6-adm-prohibited Chain OUTPUT (policy ACCEPT) num target prot opt source destination [root@wsgw1 CVU_11.2.0.4.0_grid]# /etc/init.d/ip6tables stop ip6tables: Setting chains to policy ACCEPT: filter [ OK ] ip6tables: Flushing firewall rules: [ OK ] ip6tables: Unloading modules: [ OK ] [root@wsgw1 CVU_11.2.0.4.0_grid]# chkconfig --level 35 iptables off [root@wsgw2 CVU_11.2.0.4.0_grid]# /etc/init.d/ip6tables status ip6tables: Firewall is not running.
标签：oracle11.2,ip6tables,0.4,11.2,PRCF,grid,ipv6,net,root 来源： https://www.cnblogs.com/lvcha001/p/12829424.html
本站声明： 1. iCode9 技术分享网（下文简称本站）提供的所有内容，仅供技术学习、探讨和分享； 2. 关于本站的所有留言、评论、转载及引用，纯属内容发起人的个人观点，与本站观点和立场无关； 3. 关于本站的所有言论和文字，纯属内容发起人的个人观点，与本站观点和立场无关； 4. 本站文章均是网友提供，不完全保证技术分享内容的完整性、准确性、时效性、风险性和版权归属；如您发现该文章侵犯了您的权益，可联系我们第一时间进行删除； 5. 本站为非盈利性的个人网站，所有内容不会用来进行牟利，也不会利用任何形式的广告来间接获益，纯粹是为了广大技术爱好者提供技术内容和技术思想的分享性交流网站。