标签：BACKUP 备份 echo ORACLE oracle RMAN backup asm ORA

oracle备份脚本：

#!/bin/sh
# $Header$
#
#bcpyrght
#***************************************************************************
#* $Copyright: Copyright (c) 2016 Veritas Technologies LLC. All rights reserved VT25-0977-2658-84-51-3 $ *
#***************************************************************************
#ecpyrght
#
# Note:  Only make modifications to a copy of this file. Changes to this file 
#        are lost when this example is overwritten during NetBackup upgrade.
#        Delete this comment from the copy.
#
# -----------------------------------------------------------------------------
#              hot_database_backup.sh
# -----------------------------------------------------------------------------
#  This script uses Recovery Manager to take a hot (inconsistent) database
#  backup. A hot backup is inconsistent because portions of the database are
#  being modified and written to the disk while the backup is progressing.
#  You must run your database in ARCHIVELOG mode to make hot backups. It is
#  assumed that this script will be executed by user root. In order for RMAN
#  to work properly we switch user (su -) to the oracle dba account before
#  execution. If this script runs under a user account that has Oracle dba
#  privilege, it will be executed using this user's account.
# -----------------------------------------------------------------------------

# -----------------------------------------------------------------------------
# Log the start of this script to both the stdout/obk_stdout 
# and stderr/obk_stderr.
# -----------------------------------------------------------------------------
echo "==== $0 started on `date` ==== stdout" 
echo "==== $0 started on `date` ==== stderr" 1>&2

DEBUG=0

if [ "$DEBUG" -gt 0 ]; then
    set -x
fi
 
# ---------------------------------------------------------------------------
# Put output in <this file name>.out. Change as desired.
# Note: output directory requires write permission.
# ---------------------------------------------------------------------------
RMAN_LOG_FILE=${0}.out

# -----------------------------------------------------------------------------
# Delete the log file before each execution so that it does not grow unbounded.  
# Remove or comment these lines if all historical output must be retained or if 
# the log file size is managed externally.
# -----------------------------------------------------------------------------

if [ -f "$RMAN_LOG_FILE" ]; then
    rm -f "$RMAN_LOG_FILE"
fi

# -----------------------------------------------------------------------------
# Initialize the log file. By default it is readable by the DBA and other
# users. Restrict the permissions as needed.
# -----------------------------------------------------------------------------
 
echo >> $RMAN_LOG_FILE
chmod 644 $RMAN_LOG_FILE

# -----------------------------------------------------------------------------
# Redirect all stderr and stdout into the specified log file and also to 
# stdout. No output will appear on stderr (or in the obk_stderr).
# -----------------------------------------------------------------------------

out=/tmp/`basename $0`.stdout.$$
trap "rm -f $out" EXIT SIGHUP SIGINT SIGQUIT SIGTRAP SIGKILL SIGUSR1 SIGUSR2 SIGPIPE SIGTERM SIGSTOP 
mkfifo "$out" 
tee -a $RMAN_LOG_FILE < "$out" &
exec 1>&- 2>&-
exec 1>"$out" 2>&1

# -----------------------------------------------------------------------------
# Log the start of this script to the log file and stdout.
# Log any additional arguments to the script.
# -----------------------------------------------------------------------------
echo "==== $0 started on `date` ====" 
echo "==== $0 $*" 
echo 

# *-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*
# *-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*
#
# NOTE: User modifications should be made only below this point.
#
# USER CUSTOMIZABLE VARIABLE SECTION
#
# ORACLE_HOME               - Oracle Home path                  
# ORACLE_SID                - Oracle Sid of the target database
# ORACLE_USER               - Oracle user with permissions to execute RMAN
# ORACLE_TARGET_CONNECT_STR - Connect string for the target database 
#                             [user]/[password][@TNSalias]
# RMAN_EXECUTABLE           - Path to the rman executable 
# RMAN_SBT_LIBRARY          - SBT library path;
#                             on AIX see technote TECH194511.
# RMAN_CATALOG              - Recovery catalog option and connect string
# BACKUP_SCHEDULE           - If overriding Default-Application-Backup schedule
# BACKUP_TAG                - User specified backup tag

ORACLE_HOME=/home/oracle/app/oracle/product/12.1.0/dbhome_1

ORACLE_SID=noncdb12c

ORACLE_USER=oracle

ORACLE_TARGET_CONNECT_STR=sys/manager
 
RMAN_EXECUTABLE=$ORACLE_HOME/bin/rman

RMAN_SBT_LIBRARY="/usr/openv/netbackup/bin/libobk.so64"

# Set the Recovery catalog to use. In This example we do not use a
# Recovery Catalog. If you choose to use one, replace the option 'nocatalog'
# with a "'catalog <userid>/<passwd>@<net service name>'" statement.

RMAN_CATALOG="nocatalog"

BACKUP_SCHEDULE=""

# Note: This tag will be appended with the dected schedule type, see schedule
# section.
BACKUP_TAG="hot_db_bk"

export ORACLE_HOME ORACLE_SID 

# Note: Additional tuning may be desired to RMAN_SEND and CMD_INPUT below.

# *-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*
# *-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*

# -----------------------------------------------------------------------------
# Determine the user which is executing this script.
# -----------------------------------------------------------------------------

BACKUP_CUSER=`id |cut -d"(" -f2 | cut -d ")" -f1`

# -----------------------------------------------------------------------------
# This script assumes that the database is properly opened. If desired,
# this would be the place to verify that.
# -----------------------------------------------------------------------------


# -----------------------------------------------------------------------------
# If this script is executed from a NetBackup schedule, NetBackup
# sets NB_ORA environment variables based on the schedule type.
# These variables can then used to dynamically select the appropriate 
# RMAN backup type.
# For example, when:
#     schedule type is                BACKUP_TYPE is
#     ----------------                --------------
# Automatic Full                     INCREMENTAL LEVEL=0
# Automatic Differential Incremental INCREMENTAL LEVEL=1
# Automatic Cumulative Incremental   INCREMENTAL LEVEL=1 CUMULATIVE
# 
# For client initiated backups, BACKUP_TYPE defaults to incremental
# level 0 (full).  To change the default for a user initiated
# backup to incremental or incremental cumulative, uncomment
# one of the following two lines.
# BACKUP_TYPE="INCREMENTAL LEVEL=1"
# BACKUP_TYPE="INCREMENTAL LEVEL=1 CUMULATIVE"
# 
# Note that we use incremental level 0 to specify full backups.
# That is because, although they are identical in content, only
# the incremental level 0 backup can have incremental backups of
# level > 0 applied to it.
# -----------------------------------------------------------------------------
 
if [ "$NB_ORA_FULL" = "1" ]; then
    echo "Full backup requested from Schedule" 
    BACKUP_TYPE="INCREMENTAL LEVEL=0"
    BACKUP_TAG="${BACKUP_TAG}_inc_lvl0"
 
elif [ "$NB_ORA_INCR" = "1" ]; then
    echo "Differential incremental backup requested from Schedule" 
    BACKUP_TYPE="INCREMENTAL LEVEL=1"
    BACKUP_TAG="${BACKUP_TAG}_inc_lvl1"
 
elif [ "$NB_ORA_CINC" = "1" ]; then
    echo "Cumulative incremental backup requested from Schedule" 
    BACKUP_TYPE="INCREMENTAL LEVEL=1 CUMULATIVE"
    BACKUP_TAG="${BACKUP_TAG}_inc_lvl1_cinc"
 
elif [ "$BACKUP_TYPE" = "" ]; then
    echo "Manual execution - defaulting to Full backup" 
    BACKUP_TYPE="INCREMENTAL LEVEL=0"
    BACKUP_TAG="${BACKUP_TAG}_inc_lvl0"
fi

echo

# -----------------------------------------------------------------------------
# Construct an RMAN SEND command when initiated from the master server.  
# This ensures that the resulting application backup jobs utilize the same 
# master server, client name, and policy name.  
#
# If desired, initialize RMAN_SEND with additional NB_ORA_* variable=value 
# pairs.
#
# NOTE WHEN USING NET SERVICE NAME: When connecting to a database
# using a net service name, you must use a send command or a parms operand to 
# specify environment variables.  In other words, when accessing a database
# through a listener, any environment variable set in this script are not 
# inherited by the Oracle channel processes because it is a child of the 
# listener process and not of this script.  For more information on the 
# environment variables, please refer to the NetBackup for Oracle Admin. Guide.
# -----------------------------------------------------------------------------

RMAN_SEND=""

if [ "$NB_ORA_SERV" != "" ]; then
    RMAN_SEND="NB_ORA_SERV=${NB_ORA_SERV}"
fi

if [ "$NB_ORA_CLIENT" != "" ]; then
    if [ "$RMAN_SEND" != "" ]; then
        RMAN_SEND="${RMAN_SEND},NB_ORA_CLIENT=${NB_ORA_CLIENT}"
    else
        RMAN_SEND="NB_ORA_CLIENT=${NB_ORA_CLIENT}"
    fi
fi

if [ "$NB_ORA_POLICY" != "" ]; then
    if [ "$RMAN_SEND" != "" ]; then
        RMAN_SEND="${RMAN_SEND},NB_ORA_POLICY=${NB_ORA_POLICY}"
    else
        RMAN_SEND="NB_ORA_POLICY=${NB_ORA_POLICY}"
    fi
fi

if [ "$BACKUP_SCHEDULE" != "" ]; then
    if [ "$RMAN_SEND" != "" ]; then
        RMAN_SEND="${RMAN_SEND},NB_ORA_SCHED=${BACKUP_SCHEDULE}"
    else
        RMAN_SEND="NB_ORA_SCHED=${BACKUP_SCHEDULE}"
    fi
fi

if [ "$RMAN_SEND" != "" ]; then
    RMAN_SEND="SEND '${RMAN_SEND}';"
fi

# ---------------------------------------------------------------------------
# Call Recovery Manager to initiate the backup.
#
# Note: Any environment variables needed at run time by RMAN 
#       must be set and exported within the CMDS variable.
# ---------------------------------------------------------------------------
#  Backs up the whole database.  This backup is part of the incremental
#  strategy (this means it can have incremental backups of levels > 0
#  applied to it).
#
#  We do not need to explicitly request the control file to be included
#  in this backup, as it is automatically included each time file 1 of
#  the system tablespace is backed up (the inference: as it is a whole
#  database backup, file 1 of the system tablespace will be backed up,
#  hence the controlfile will also be included automatically).
#
#  Typically, a level 0 backup would be done at least once a week.
#
#  The scenario assumes:
#     o you are backing your database up to two tape drives
#     o you want each backup set to include a maximum of 5 files
#     o you wish to include offline datafiles, and read-only tablespaces,
#       in the backup
#     o you want the backup to continue if any files are inaccessible.
#     o This script explicitly backs up the control file.  If you specify or 
#       default to nocatalog, the controlfile backup that occurs
#       automatically as the result of backing up the system file is
#       not sufficient; it will not contain records for the backup that
#       is currently in progress.
#     o you want to archive the current log, back up all the
#       archive logs using two channels, putting a maximum of 20 logs
#       in a backup set, and deleting them once the backup is complete.
#
#  Note that the format string is constructed to guarantee uniqueness and
#  to enhance NetBackup for Oracle backup and restore performance.
#
# -----------------------------------------------------------------------------

# When needed, commands to debug the environment present in the subshell where 
# RMAN will be started. 

if [ "$DEBUG" -gt 0 ]; then
    ENV_COMMANDS="
    echo ----- LIST OF DECLARED VARIABLES IN SUBSHELL ----- 
    echo 
    set | sort
    echo 
    echo ----- LANGUAGE AND LOCALE ----- 
    echo 
    locale 
    echo 
    echo ----- PROCESS LIST ----- 
    echo 
    ps -ef
    echo"
else
    ENV_COMMANDS=""
fi

# The RMAN commands to be executed.
# NOTE: If the default shell for the ORACLE_USER is the C shell, then update 
# the export syntax as follows:
# setenv ORACLE_HOME "$ORACLE_HOME"
# setenv ORACLE_SID "$ORACLE_SID"

CMDS="
export ORACLE_HOME=$ORACLE_HOME
export ORACLE_SID=$ORACLE_SID
echo
echo ----- SUBSHELL ENV VARIABLES ----- 
echo 
env | sort | egrep '^ORACLE_|^NB_ORA_|^RMAN_|^BACKUP_|^TNS_' 
echo
$ENV_COMMANDS
echo ----- STARTING RMAN EXECUTION -----
echo
$RMAN_EXECUTABLE target $ORACLE_TARGET_CONNECT_STR $RMAN_CATALOG"

# Building the PARMS option for the RMAN channels

if [ $RMAN_SBT_LIBRARY != "" ]; then
    RMAN_SBT_LIBRARY_PARMS="PARMS 'SBT_LIBRARY=$RMAN_SBT_LIBRARY'"
else
    RMAN_SBT_LIBRARY_PARMS=""
fi

# The RMAN statements that are needed to perform the desired backup.
# Add, delete, or modify the CMD_INPUT per the backup requirements for the 
# instance.

CMD_INPUT="<< EOF
SHOW ALL;
RUN {
ALLOCATE CHANNEL ch00 TYPE 'SBT_TAPE' $RMAN_SBT_LIBRARY_PARMS;
ALLOCATE CHANNEL ch01 TYPE 'SBT_TAPE' $RMAN_SBT_LIBRARY_PARMS;
$RMAN_SEND
BACKUP
    $BACKUP_TYPE
    SKIP INACCESSIBLE
    TAG $BACKUP_TAG
    FILESPERSET 5
    # recommended format, must end with %t
    FORMAT 'bk_%s_%p_%t'
    DATABASE;
    sql 'alter system archive log current';
RELEASE CHANNEL ch00;
RELEASE CHANNEL ch01;
# backup all archive logs
ALLOCATE CHANNEL ch00 TYPE 'SBT_TAPE' $RMAN_SBT_LIBRARY_PARMS;
ALLOCATE CHANNEL ch01 TYPE 'SBT_TAPE' $RMAN_SBT_LIBRARY_PARMS;
$RMAN_SEND
BACKUP
    filesperset 20
    # recommended format, must end with %t
    FORMAT 'al_%s_%p_%t'
    ARCHIVELOG ALL DELETE INPUT;
RELEASE CHANNEL ch00;
RELEASE CHANNEL ch01;
#
# Note: During the process of backing up the database, RMAN also backs up the
# control file.  That backup of the control file does not contain the 
# information about the archive log backup if "nocatalog" has been specified.
# To include the information about the current backup, the control file should
# be backed up as the last step.  This step may not be necessary if using 
# a recovery catalog or AUTOBACKUP CONTROLFILE.
#
ALLOCATE CHANNEL ch00 TYPE 'SBT_TAPE' $RMAN_SBT_LIBRARY_PARMS;
$RMAN_SEND
BACKUP
    # recommended format, must end with %t
    FORMAT 'cntrl_%s_%p_%t'
    CURRENT CONTROLFILE;
RELEASE CHANNEL ch00;
}
EOF
"

# -----------------------------------------------------------------------------
# Print out the values of various variables matched by the following patterns.
# -----------------------------------------------------------------------------
if [ "$DEBUG" -gt 0 ]; then
    echo ----- LIST OF DECLARED VARIABLES IN SCRIPT ----- 
    echo 
    set | sort
    echo
fi

echo 
echo "----- SCRIPT VARIABLES -----" 
echo 
set | sort | egrep '^ORACLE_|^NB_ORA_|^RMAN_|^BACKUP_|^TNS_' 
echo 
echo "----- RMAN CMD -----" 
echo 
echo "$CMDS" 
echo 
echo "----- RMAN INPUT -----" 
echo 
echo "$CMD_INPUT" 
echo 

# Sanity check the environment.

if [ ! -x $RMAN_EXECUTABLE ]; then
    echo "ERR: $RMAN_EXECUTABLE: required executable not found!" 1>&2
    exit 1
fi

if [ ! -f  `echo $RMAN_SBT_LIBRARY | cut -d'(' -f1`  ]; then
    echo "ERR: $RMAN_SBT_LIBRARY: required library not found!" 1>&2
    exit 1
fi

echo "----- STARTING CMDS EXECUTION -----"
echo

if [ "$BACKUP_CUSER" = "root" ]; then
    su - $ORACLE_USER -c "$CMDS $CMD_INPUT" 
    RSTAT=$?
else
    /bin/sh -c "$CMDS $CMD_INPUT" 
    RSTAT=$?
fi
 
# ---------------------------------------------------------------------------
# Log the completion of this script to both stdout/obk_stdout 
# and stderr/obk_stderr.
# ---------------------------------------------------------------------------
 
if [ "$RSTAT" = "0" ]; then
    LOGMSG="ended successfully"
else
    LOGMSG="ended in error"
fi
 
echo 
echo "==== $0 $LOGMSG on `date` ==== stdout"  
echo "==== $0 $LOGMSG on `date` ==== stderr" 1>&2 
echo 

exit $RSTAT

oracle集群优化 Archive destination ，防止出错：

[oracle@db04 ~]$sqlplus / as sysdba

SQL*Plus: Release 11.2.0.4.0 Production on Sun May 5 14:24:15 2019

Copyright (c) 1982, 2013, Oracle.  All rights reserved.


Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.4.0 - 64bit Production
With the Partitioning, Real Application Clusters, Automatic Storage Management, OLAP,
Data Mining and Real Application Testing options

SQL> archive log list;
Database log mode           Archive Mode
Automatic archival           Enabled
Archive destination           +ORA_DATA
Oldest online log sequence     1
Next log sequence to archive   6
Current log sequence           6



rman target /

Recovery Manager: Release 11.2.0.4.0 - Production on Sun May 5 14:26:23 2019

Copyright (c) 1982, 2011, Oracle and/or its affiliates.  All rights reserved.

connected to target database: NDMCDB (DBID=3222458319)

RMAN> show all;

using target database control file instead of recovery catalog
....
CONFIGURE SNAPSHOT CONTROLFILE NAME TO '/opt/oracle/app/oracle/product/11.2.0/db_1/dbs/snapcf_DB2.f'; # default



RMAN> CONFIGURE SNAPSHOT CONTROLFILE NAME TO '+ORA_DATA/snapcf_DB2.f'; 

标签：BACKUP,备份,echo,ORACLE,oracle,RMAN,backup,asm,ORA
来源： https://www.cnblogs.com/yihr/p/10813344.html

本站声明： 1. iCode9 技术分享网（下文简称本站）提供的所有内容，仅供技术学习、探讨和分享；
2. 关于本站的所有留言、评论、转载及引用，纯属内容发起人的个人观点，与本站观点和立场无关；
3. 关于本站的所有言论和文字，纯属内容发起人的个人观点，与本站观点和立场无关；
4. 本站文章均是网友提供，不完全保证技术分享内容的完整性、准确性、时效性、风险性和版权归属；如您发现该文章侵犯了您的权益，可联系我们第一时间进行删除；
5. 本站为非盈利性的个人网站，所有内容不会用来进行牟利，也不会利用任何形式的广告来间接获益，纯粹是为了广大技术爱好者提供技术内容和技术思想的分享性交流网站。