标签：map Shuffle val partition 源码 key Spark 排序 def
shuffle很重要，调优的重点、性能的杀手
未优化的shuffle：
(图片来源：北风网）
未优化的shuffle有两个特点：
- spark早期版本中，shuffleMapTask将所有数据写入bucket缓存后，才会刷新到磁盘，但是缓存就容易OOM，所以后来的版本，这个缓存设置了阈值，默认100kb，写入数据达到缓存的阈值后，就会将数据刷新到磁盘。这种就不容易OOM，但是频繁刷新涉及过多IO操作，所以这个阈值也是性能优化的一个点
- 和MapReduce不同，MapReduce需要将所有数据写入本地磁盘文件后才能启动reduce操作来拉取数据，因为MapReduce涉及排序，排序就需要对所有数据排序，所以要等全部数据写后才reduce；但是spark不用排序，shuffleMapTask每写入一点数据，ResultTask就可以拉取，然后在本地执行定义的函数和算子进行计算；这种机制好处就在于速度快，但是也有个问题，MapReduce提供的reduce是可以处理每个key对应的value的，很方便；但是spark这种机制导致不能提供直接处理key对应的value的算子，只能通过groupbykey，先shuffle，得到MapPartitionRDD，然后再用map算子处理每个key对应的values，不是很方便。
优化的shuffle
复用缓存，减少文件
（图片来源：北风网）
源码分析：
从上篇文章中，只写了task执行中的rdd如何实现算子和函数，没有写shufflemanager如何进行写操作的，所以从那里进来，找到shuffleMapTask的write方法
/**
* Obtained inside a map task to write out records to the shuffle system.
*/
private[spark] abstract class ShuffleWriter[K, V] {
/** Write a sequence of records to this task's output */
@throws[IOException]
def write(records: Iterator[Product2[K, V]]): Unit
/** Close this writer, passing along whether the map completed */
def stop(success: Boolean): Option[MapStatus]
}
shuffleWriter只是个抽象类，看来是有具体的实现子类
在我分析的spark2.1.1版本中，使用的是SortShuffleWriter
进到里面，看到write方法
/** Write a bunch of records to this task's output */
override def write(records: Iterator[Product2[K, V]]): Unit = {
// 判断是否需要使用Map端的合并
// 上下两种情况，就是下面的不使用聚合也不使用排序
sorter = if (dep.mapSideCombine) {
// 需要进行map端聚合
new ExternalSorter[K, V, C](
context, dep.aggregator, Some(dep.partitioner), dep.keyOrdering, dep.serializer)
} else {
// 不需要进行map端聚合
/*
* 不会向sorter传入聚合或者排序，因为我们不关心在每个partition中key是否是有序
* 如果正在执行的是sortByKey,那么排序操作会在reduce端实现
* */
new ExternalSorter[K, V, V](
context, aggregator = None, Some(dep.partitioner), ordering = None, dep.serializer)
}
// sorter中保存了所有产生的溢写文件
sorter.insertAll(records)
// Don't bother including the time to open the merged output file in the shuffle write time,
// because it just opens a single file, so is typically too fast to measure accurately
// (see SPARK-3570).
val output = shuffleBlockResolver.getDataFile(dep.shuffleId, mapId)
val tmp = Utils.tempFileWith(output)
try {
val blockId = ShuffleBlockId(dep.shuffleId, mapId, IndexShuffleBlockResolver.NOOP_REDUCE_ID)
val partitionLengths = sorter.writePartitionedFile(blockId, tmp)
shuffleBlockResolver.writeIndexFileAndCommit(dep.shuffleId, mapId, partitionLengths, tmp)
mapStatus = MapStatus(blockManager.shuffleServerId, partitionLengths)
} finally {
if (tmp.exists() && !tmp.delete()) {
logError(s"Error while deleting temp file ${tmp.getAbsolutePath}")
}
}
}
首先我们看看sorter是个啥,从new ExternalSorter进去ExternalSorter看看
进来有这么一大段描述
/**
* Sorts and potentially merges a number of key-value pairs of type (K, V) to produce key-combiner
* pairs of type (K, C). Uses a Partitioner to first group the keys into partitions, and then
* optionally sorts keys within each partition using a custom Comparator. Can output a single
* partitioned file with a different byte range for each partition, suitable for shuffle fetches.
*
* If combining is disabled, the type C must equal V -- we'll cast the objects at the end.
*
* Note: Although ExternalSorter is a fairly generic sorter, some of its configuration is tied
* to its use in sort-based shuffle (for example, its block compression is controlled by
* `spark.shuffle.compress`). We may need to revisit this if ExternalSorter is used in other
* non-shuffle contexts where we might want to use different configuration settings.
*
* @param aggregator optional Aggregator with combine functions to use for merging data
* @param partitioner optional Partitioner; if given, sort by partition ID and then key
* @param ordering optional Ordering to sort keys within each partition; should be a total ordering
* @param serializer serializer to use when spilling to disk
*
* Note that if an Ordering is given, we'll always sort using it, so only provide it if you really
* want the output keys to be sorted. In a map task without map-side combine for example, you
* probably want to pass None as the ordering to avoid extra sorting. On the other hand, if you do
* want to do combining, having an Ordering is more efficient than not having it.
*
* Users interact with this class in the following way:
*
* 1. Instantiate an ExternalSorter.
*
* 2. Call insertAll() with a set of records.
*
* 3. Request an iterator() back to traverse sorted/aggregated records.
* - or -
* Invoke writePartitionedFile() to create a file containing sorted/aggregated outputs
* that can be used in Spark's sort shuffle.
*
* At a high level, this class works internally as follows:
*
* - We repeatedly fill up buffers of in-memory data, using either a PartitionedAppendOnlyMap if
* we want to combine by key, or a PartitionedPairBuffer if we don't.
* Inside these buffers, we sort elements by partition ID and then possibly also by key.
* To avoid calling the partitioner multiple times with each key, we store the partition ID
* alongside each record.
*
* - When each buffer reaches our memory limit, we spill it to a file. This file is sorted first
* by partition ID and possibly second by key or by hash code of the key, if we want to do
* aggregation. For each file, we track how many objects were in each partition in memory, so we
* don't have to write out the partition ID for every element.
*
* - When the user requests an iterator or file output, the spilled files are merged, along with
* any remaining in-memory data, using the same sort order defined above (unless both sorting
* and aggregation are disabled). If we need to aggregate by key, we either use a total ordering
* from the ordering parameter, or read the keys with the same hash code and compare them with
* each other for equality to merge values.
*
* - Users are expected to call stop() at the end to delete all the intermediate files.
*/
是个啥意思呢
这个sorter可以排序并可能合并多个类型为 (K, V) 的键值对以生成类型为 (K, C) 的键组合器对（啥是K,V类型转为K,C，比如combineByKey就是将K,V类型转为K,C类型的算子）。使用 Partitioner 首先将键分组到分区中，然后有选择地使用自定义比较器对每个分区内的键进行排序。可以为每个分区输出具有不同字节范围的单个分区文件，适用于 shuffle fetch
参数说明：
- aggregator：可选聚合器，带有用于合并数据的组合函数
- partitioner：可选的分区器；如果给定，按分区 ID 排序，然后按key二次排序
- ordering：可选排序以对每个分区内的键进行排序；应该是一个总排序
- serializer：溢出到磁盘时使用的序列化程序
如何跟ExternalSorter交互呢？
- 实例化一个ExternalSorter
- 对一个record集合调用insertAll()方法
- 请求一个 iterator() 返回来遍历 sorted/aggregated 记录。或者说，调用 writePartitionedFile() 以创建一个包含 sorted/aggregated 输出的文件，该输出可用于 Spark 的排序 shuffle
ExternalSorter内部的工作：
反复填充内存数据的缓冲区，如果我们想按键组合，则使用 PartitionedAppendOnlyMap，否则使用 PartitionedPairBuffer。在这些缓冲区内，我们按分区 ID 对元素进行排序，然后也可能按键排序。为了避免使用每个键多次调用分区器，我们将分区 ID 存储在每条记录旁边。
当每个缓冲区达到我们的内存限制时，我们将其溢出到一个文件中。如果我们想进行聚合，这个文件首先按分区 ID 排序，然后可能按键或键的哈希码排序。对于每个文件，我们跟踪内存中每个分区中有多少对象，因此我们不必为每个元素写出分区 ID。
当用户请求迭代器或文件输出时，溢出的文件将与任何剩余的内存数据一起使用上面定义的相同排序顺序进行合并（除非排序和聚合都被禁用）。如果我们需要按键聚合，我们要么使用排序参数的总排序，要么使用相同的哈希码读取键并将它们相互比较以合并值。
看看sorter的insertAll方法
def insertAll(records: Iterator[Product2[K, V]]): Unit = {
// TODO: stop combining if we find that the reduction factor isn't high
val shouldCombine = aggregator.isDefined
// 判断是否需要进行map端的合并操作
//这个就是ExternalSorter里的处理逻辑，反复填充内存数据的缓冲区，如果我们想按键组合，则使用 PartitionedAppendOnlyMap，否则使用 PartitionedPairBuffer
if (shouldCombine) {
// Combine values in-memory first using our AppendOnlyMap
// 来一条数据我们首先使用Map在内存中进行更新
// 下面两个是两个方法
// 对应rdd.aggregatorByKey的 seqOp 参数
// 如果map中有对应的key，那么使用mergeValue来更新对应的value
//mergeValue函数将新值合并到聚合结果中。
val mergeValue = aggregator.get.mergeValue
// 对应rdd.aggregatorByKey的zeroValue参数，利用zeroValue来创建Combiner
// 如果map中没有对应的key，那么使用createCombiner来创建一个comniber
val createCombiner = aggregator.get.createCombiner
var kv: Product2[K, V] = null
// 判断当前key是否之前出现过，从而决定是更新还是创建一个新的combiner
val update = (hadValue: Boolean, oldValue: C) => {
if (hadValue) mergeValue(oldValue, kv._2) else createCombiner(kv._2)
}
while (records.hasNext) {
// 检查spill的频率
addElementsRead()
// 获取下一条记录
kv = records.next()
// ((partition,key),update方法)
//进来看看
map.changeValue((getPartition(kv._1), kv._1), update)
// 判断是否需要将内存中的数据溢写到磁盘
maybeSpillCollection(usingMap = true)
}
} else {
// Stick values into our buffer
while (records.hasNext) {
addElementsRead()
val kv = records.next()
buffer.insert(getPartition(kv._1), kv._1, kv._2.asInstanceOf[C])
maybeSpillCollection(usingMap = false)
}
}
}
可以看到，两个逻辑，填充内存数据的缓冲区，如果我们想按键组合，则使用 PartitionedAppendOnlyMap，否则使用 PartitionedPairBuffer
分别进入map和buffer看看
// Data structures to store in-memory objects before we spill. Depending on whether we have an
// Aggregator set, we either put objects into an AppendOnlyMap where we combine them, or we
// store them in an array buffer.
//在溢出之前存储内存中对象的数据结构。
//根据我们是否有聚合器集，我们要么将对象放入 AppendOnlyMap 中，然后将它们组合起来，要么将它们存储在数组缓冲区中。
@volatile private var map = new PartitionedAppendOnlyMap[K, C]
@volatile private var buffer = new PartitionedPairBuffer[K, C]
map是 PartitionedAppendOnlyMap的实例，buffer是PartitionedPairBuffer的实例
分别进去看看
PartitionedAppendOnlyMap
/**
* Implementation of WritablePartitionedPairCollection that wraps a map in which the keys are tuples
* of (partition ID, K)
* WritablePartitionedPairCollection 的实现，它包装了一个映射，其中的键是 (partition ID, K) 的元组
*/
private[spark] class PartitionedAppendOnlyMap[K, V]
extends SizeTrackingAppendOnlyMap[(Int, K), V] with WritablePartitionedPairCollection[K, V] {
def partitionedDestructiveSortedIterator(keyComparator: Option[Comparator[K]])
: Iterator[((Int, K), V)] = {
val comparator = keyComparator.map(partitionKeyComparator).getOrElse(partitionComparator)
destructiveSortedIterator(comparator)
}
def insert(partition: Int, key: K, value: V): Unit = {
update((partition, key), value)
}
}
可以看到它继承至SizeTrackingAppendOnlyMap
/**
* An append-only map that keeps track of its estimated size in bytes.
* 只允许添加的map，会跟踪估计它的大小
*/
private[spark] class SizeTrackingAppendOnlyMap[K, V]
extends AppendOnlyMap[K, V] with SizeTracker
{
override def update(key: K, value: V): Unit = {
super.update(key, value)
super.afterUpdate()
}
/*
在这就可以看到map的changeValue方法了
*/
override def changeValue(key: K, updateFunc: (Boolean, V) => V): V = {
val newValue = super.changeValue(key, updateFunc)
super.afterUpdate()
newValue
}
override protected def growTable(): Unit = {
super.growTable()
resetSamples()
}
}
进入其父类的changeValue看看
/**
* Set the value for key to updateFunc(hadValue, oldValue), where oldValue will be the old value
* for key, if any, or null otherwise. Returns the newly updated value.
*/
def changeValue(key: K, updateFunc: (Boolean, V) => V): V = {
assert(!destroyed, destructionMessage)
val k = key.asInstanceOf[AnyRef]
if (k.eq(null)) {
if (!haveNullValue) {
incrementSize()
}
nullValue = updateFunc(haveNullValue, nullValue)
haveNullValue = true
return nullValue
}
//就是针对每个key,这里的key的类型是(partitonId,key)
//针对这个key计算一次hash值然后调用rehash再进行与运算
//pos是个索引
var pos = rehash(k.hashCode) & mask
var i = 1
while (true) {
//取到rehash后的索引所在的数据
val curKey = data(2 * pos)
//如果这个位置的数据为null
if (curKey.eq(null)) {
val newValue = updateFunc(false, null.asInstanceOf[V])
//直接把k放入此位置
data(2 * pos) = k
data(2 * pos + 1) = newValue.asInstanceOf[AnyRef]
//size++
incrementSize()
return newValue
} else if (k.eq(curKey) || k.equals(curKey)) {
//如果这个位置有人了，且key相同
//则更新value
val newValue = updateFunc(true, data(2 * pos + 1).asInstanceOf[V])
data(2 * pos + 1) = newValue.asInstanceOf[AnyRef]
return newValue
} else {
//如果位置有人了，但是key不相同
//则位置++，解决冲突
val delta = i
pos = (pos + delta) & mask
i += 1
}
}
null.asInstanceOf[V] // Never reached but needed to keep compiler happy
}
更新完value后，有个 super.afterUpdate()
/**
* Callback to be invoked after every update.
*/
protected def afterUpdate(): Unit = {
//更新次数+1
numUpdates += 1
//如果更新次数到达采样的更新次数
if (nextSampleNum == numUpdates) {
takeSample()
}
}
/**
* Take a new sample of the current collection's size.
*/
private def takeSample(): Unit = {
//samples用来存放对集合大小的估计，只能保存最近两次的估计
samples.enqueue(Sample(SizeEstimator.estimate(this), numUpdates))
// Only use the last two samples to extrapolate
if (samples.size > 2) {
samples.dequeue()
}
val bytesDelta = samples.toList.reverse match {
case latest :: previous :: tail =>
(latest.size - previous.size).toDouble / (latest.numUpdates - previous.numUpdates)
// If fewer than 2 samples, assume no change
case _ => 0
}
bytesPerUpdate = math.max(0, bytesDelta)
nextSampleNum = math.ceil(numUpdates * SAMPLE_GROWTH_RATE).toLong
}
至此，changevalue结束。来看看changevalue后的maybeSpillCollection(usingMap = true)，溢写数据到磁盘。
/**
* Spill the current in-memory collection to disk if needed.
*
* @param usingMap whether we're using a map or buffer as our current in-memory collection
*/
private def maybeSpillCollection(usingMap: Boolean): Unit = {
var estimatedSize = 0L
//判断我们使用的是map还是buffer,取决于是否需要进行map端join
if (usingMap) {
//估计大小
estimatedSize = map.estimateSize()
if (maybeSpill(map, estimatedSize)) {
map = new PartitionedAppendOnlyMap[K, C]
}
} else {
estimatedSize = buffer.estimateSize()
if (maybeSpill(buffer, estimatedSize)) {
buffer = new PartitionedPairBuffer[K, C]
}
}
if (estimatedSize > _peakMemoryUsedBytes) {
_peakMemoryUsedBytes = estimatedSize
}
}
看一下磁盘溢写的条件
/**
* Spills the current in-memory collection to disk if needed. Attempts to acquire more
* memory before spilling.
*
* @param collection collection to spill to disk
* @param currentMemory estimated size of the collection in bytes
* @return true if `collection` was spilled to disk; false otherwise
*/
protected def maybeSpill(collection: C, currentMemory: Long): Boolean = {
var shouldSpill = false//返回参数
//已读取数据是32的倍数，当前占用的内存量大于设定的阈值
//首先会请求增大容量，如果无法获得足够多的容量，就会发生溢写
if (elementsRead % 32 == 0 && currentMemory >= myMemoryThreshold) {
// Claim up to double our current memory from the shuffle memory pool
// elementsRead:从上次spill后的大小
//currentMemory：估计的集合大小
//myMemoryThreshold：阈值
val amountToRequest = 2 * currentMemory - myMemoryThreshold
//需要的差值
val granted = acquireMemory(amountToRequest)
//扩容
myMemoryThreshold += granted
// If we were granted too little memory to grow further (either tryToAcquire returned 0,
// or we already had more memory than myMemoryThreshold), spill the current collection
//如果分配的内存量不够，那么我们就需要进行溢写了
shouldSpill = currentMemory >= myMemoryThreshold
}
//或者读取的数据量大于了设置的强制溢写的阈值
shouldSpill = shouldSpill || _elementsRead > numElementsForceSpillThreshold
// Actually spill
if (shouldSpill) {
_spillCount += 1
logSpillage(currentMemory)
spill(collection)
_elementsRead = 0
_memoryBytesSpilled += currentMemory
releaseMemory()
}
shouldSpill
}
完了之后，回到ExternalSorter，找到spill
/**
* Spill our in-memory collection to a sorted file that we can merge later.
* 将内存集合溢出到一个排序的文件，方便后面合并
* We add this file into `spilledFiles` to find it later.
*将这个文件加入到spilledFiles方便后面找到它
* @param collection whichever collection we're using (map or buffer)
*/
override protected[this] def spill(collection: WritablePartitionedPairCollection[K, C]): Unit = {
val inMemoryIterator = collection.destructiveSortedWritablePartitionedIterator(comparator)
//这个destructiveSortedWritablePartitionedIterator，遍历数据并写出元素而不是返回它们。记录按其分区 ID 和给定比较器的顺序返回。这可能会破坏底层集合。
val spillFile = spillMemoryIteratorToDisk(inMemoryIterator)
//将内存迭代器的内容溢出到磁盘上的临时文件。
spills += spillFile
//将溢出文件添加到arraybuffers中
}
进入这个comparator
private def comparator: Option[Comparator[K]] = {
if (ordering.isDefined || aggregator.isDefined) {
Some(keyComparator)
} else {
None
}
}
再进keyComparator
// A comparator for keys K that orders them within a partition to allow aggregation or sorting.
//key K 的比较器,在分区内对它们进行排序以允许聚合或排序。
// Can be a partial ordering by hash code if a total ordering is not provided through by the
//如果用户未提供总排序，则可以通过哈希码进行部分排序
// user. (A partial ordering means that equal keys have comparator.compare(k, k) = 0, but some
// non-equal keys also have this, so we need to do a later pass to find truly equal keys).
// Note that we ignore this if no aggregator and no ordering are given.
private val keyComparator: Comparator[K] = ordering.getOrElse(new Comparator[K] {
override def compare(a: K, b: K): Int = {
val h1 = if (a == null) 0 else a.hashCode()
val h2 = if (b == null) 0 else b.hashCode()
if (h1 < h2) -1 else if (h1 == h2) 0 else 1
}
})
回到PartitionedAppendOnlyMap
/**
* Implementation of WritablePartitionedPairCollection that wraps a map in which the keys are tuples
* of (partition ID, K)
*/
private[spark] class PartitionedAppendOnlyMap[K, V]
extends SizeTrackingAppendOnlyMap[(Int, K), V] with WritablePartitionedPairCollection[K, V] {
def partitionedDestructiveSortedIterator(keyComparator: Option[Comparator[K]])
: Iterator[((Int, K), V)] = {
//对传入的keyComparator调用处理
val comparator = keyComparator.map(partitionKeyComparator).getOrElse(partitionComparator)
destructiveSortedIterator(comparator)
}
def insert(partition: Int, key: K, value: V): Unit = {
update((partition, key), value)
}
}
看看partitionKeyComparator和partitionComparator，其实就是一个会按照分区和key排序，一个只按照分区排序。
**
* A comparator for (Int, K) pairs that orders them both by their partition ID and a key ordering.
* //先按分区ID排序再按key排序
*/
def partitionKeyComparator[K](keyComparator: Comparator[K]): Comparator[(Int, K)] = {
new Comparator[(Int, K)] {
override def compare(a: (Int, K), b: (Int, K)): Int = {
val partitionDiff = a._1 - b._1
if (partitionDiff != 0) {
partitionDiff
} else {
keyComparator.compare(a._2, b._2)
}
}
}
}
}
private[spark] object WritablePartitionedPairCollection {
/**
* A comparator for (Int, K) pairs that orders them by only their partition ID.
* 只按照分区id排序
*/
def partitionComparator[K]: Comparator[(Int, K)] = new Comparator[(Int, K)] {
override def compare(a: (Int, K), b: (Int, K)): Int = {
a._1 - b._1
}
}
再看看destructiveSortedIterator(comparator)
/**
* Return an iterator of the map in sorted order. This provides a way to sort the map without
* using additional memory, at the expense of destroying the validity of the map.
*/
def destructiveSortedIterator(keyComparator: Comparator[K]): Iterator[(K, V)] = {
destroyed = true
// Pack KV pairs into the front of the underlying array
//将 KV 对打包到底层数组的前面
var keyIndex, newIndex = 0
while (keyIndex < capacity) {
if (data(2 * keyIndex) != null) {
data(2 * newIndex) = data(2 * keyIndex)
data(2 * newIndex + 1) = data(2 * keyIndex + 1)
newIndex += 1
}
keyIndex += 1
}
assert(curSize == newIndex + (if (haveNullValue) 1 else 0))
//对数组先按照partition排序，再按照key排序
new Sorter(new KVArraySortDataFormat[K, AnyRef]).sort(data, 0, newIndex, keyComparator)
new Iterator[(K, V)] {
var i = 0
var nullValueReady = haveNullValue
def hasNext: Boolean = (i < newIndex || nullValueReady)
def next(): (K, V) = {
if (nullValueReady) {
nullValueReady = false
(null.asInstanceOf[K], nullValue)
} else {
val item = (data(2 * i).asInstanceOf[K], data(2 * i + 1).asInstanceOf[V])
i += 1
item
}
}
}
}
这是在干啥？？
map在进行存储时是按照hashTable的方式进行存储的，当需要写入到磁盘上时，会使用一个会破坏原有数组结构的迭代器，该迭代器将数据全部移动到hashtable底层数据的最左边，将数据按照先parititon后key的排序排序，然后将数据从内存写入到磁盘
来看看到底怎么溢出的
/**
* Spill the in-memory Iterator to a temporary file on disk.
*/
private[this] def spillMemoryIteratorToDisk(inMemoryIterator: Iterator[(K, C)])
: DiskMapIterator = {
val (blockId, file) = diskBlockManager.createTempLocalBlock()
val writer = blockManager.getDiskWriter(blockId, file, ser, fileBufferSize, writeMetrics)
var objectsWritten = 0
// List of batch sizes (bytes) in the order they are written to disk
//按写入磁盘顺序的批处理大小（字节）列表
val batchSizes = new ArrayBuffer[Long]
// Flush the disk writer's contents to disk, and update relevant variables
//将磁盘写入器的内容刷新到磁盘，并更新相关变量
def flush(): Unit = {
//作为一个原子块提交
val segment = writer.commitAndGet()
//batchsize++
batchSizes += segment.length
_diskBytesSpilled += segment.length
objectsWritten = 0
}
var success = false
try {
while (inMemoryIterator.hasNext) {
val kv = inMemoryIterator.next()
writer.write(kv._1, kv._2)
objectsWritten += 1
if (objectsWritten == serializerBatchSize) {
// private val serializerBatchSize = sparkConf.getLong("spark.shuffle.spill.batchSize", 10000)
//由conf设置的参数，spark.shuffle.spill.batchSize,默认10000
//批量flush
flush()
}
}
//批量完了还有剩余，再flush一次
if (objectsWritten > 0) {
flush()
writer.close()
} else {
//还原尚未提交的写入。当有运行时异常时，调用者应该调用这个函数。该方法不会抛出异常，尽管截断写入的数据可能不成功
writer.revertPartialWritesAndClose()
}
success = true
} finally {
if (!success) {
// This code path only happens if an exception was thrown above before we set success;
// close our stuff and let the exception be thrown further
writer.revertPartialWritesAndClose()
if (file.exists()) {
if (!file.delete()) {
logWarning(s"Error deleting ${file}")
}
}
}
}
//返回一个从磁盘映射中按排序顺序返回 (K, C) 对的迭代器
new DiskMapIterator(file, blockId, batchSizes)
}
到这就完成了数据的分区排序和溢写磁盘。
再看看合并的过程
退退退退到最开始的sortShuffleWriter的write方法中，在sorter.insertall()后
还有这段代码
// Don't bother including the time to open the merged output file in the shuffle write time,
// because it just opens a single file, so is typically too fast to measure accurately
// (see SPARK-3570).
//shuffleBlockResolver 创建和维护 shuffle 块在逻辑块和物理文件位置之间的映射。
val output = shuffleBlockResolver.getDataFile(dep.shuffleId, mapId)
//返回与`path`在同一目录中的临时文件的路径。
val tmp = Utils.tempFileWith(output)
try {
val blockId = ShuffleBlockId(dep.shuffleId, mapId, IndexShuffleBlockResolver.NOOP_REDUCE_ID)
//将添加到此 ExternalSorter 中的所有数据写入磁盘存储中的文件。这由 SortShuffleWriter 调用。返回文件每个分区的长度数组
val partitionLengths = sorter.writePartitionedFile(blockId, tmp)
shuffleBlockResolver.writeIndexFileAndCommit(dep.shuffleId, mapId, partitionLengths, tmp)
mapStatus = MapStatus(blockManager.shuffleServerId, partitionLengths)
// 最终生成的mapStatus会随着executor向driver发送的状态更新信息发送给driver
} finally {
if (tmp.exists() && !tmp.delete()) {
logError(s"Error while deleting temp file ${tmp.getAbsolutePath}")
}
}
writePartitionedFile方法
/**
* Write all the data added into this ExternalSorter into a file in the disk store. This is
* called by the SortShuffleWriter.
*
* @param blockId block ID to write to. The index file will be blockId.name + ".index".
* @return array of lengths, in bytes, of each partition of the file (used by map output tracker)
*/
def writePartitionedFile(
blockId: BlockId,
outputFile: File): Array[Long] = {
// Track location of each range in the output file
val lengths = new Array[Long](numPartitions)
val writer = blockManager.getDiskWriter(blockId, outputFile, serInstance, fileBufferSize,
context.taskMetrics().shuffleWriteMetrics)
if (spills.isEmpty) {
// Case where we only have in-memory data
//如果只有内存中的数据
val collection = if (aggregator.isDefined) map else buffer
val it = collection.destructiveSortedWritablePartitionedIterator(comparator)
while (it.hasNext) {
val partitionId = it.nextPartition()
while (it.hasNext && it.nextPartition() == partitionId) {
it.writeNext(writer)
}
val segment = writer.commitAndGet()
lengths(partitionId) = segment.length
}
} else {
//有多个溢写文件
// We must perform merge-sort; get an iterator by partition and write everything directly.
//我们必须执行归并排序；按分区获取迭代器并直接写入所有内容。
for ((id, elements) <- this.partitionedIterator) {
if (elements.hasNext) {
for (elem <- elements) {
writer.write(elem._1, elem._2)
}
val segment = writer.commitAndGet()
lengths(id) = segment.length
}
}
}
writer.close()
context.taskMetrics().incMemoryBytesSpilled(memoryBytesSpilled)
context.taskMetrics().incDiskBytesSpilled(diskBytesSpilled)
context.taskMetrics().incPeakExecutionMemory(peakMemoryUsedBytes)
lengths
}
进入partitionedIterator
/**
* Return an iterator over all the data written to this object, grouped by partition and
* aggregated by the requested aggregator. For each partition we then have an iterator over its
* contents, and these are expected to be accessed in order (you can't "skip ahead" to one
* partition without reading the previous one). Guaranteed to return a key-value pair for each
* partition, in order of partition ID.
* 返回写入此对象的所有数据的迭代器，按分区分组并由请求的聚合器聚合。对于每个分区，我们都有一个遍历其内容的迭代器，这些内容应该按顺序访问
*
* For now, we just merge all the spilled files in once pass, but this can be modified to
* support hierarchical merging.
* Exposed for testing.
*/
def partitionedIterator: Iterator[(Int, Iterator[Product2[K, C]])] = {
val usingMap = aggregator.isDefined
val collection: WritablePartitionedPairCollection[K, C] = if (usingMap) map else buffer
if (spills.isEmpty) {
// Special case: if we have only in-memory data, we don't need to merge streams, and perhaps
// we don't even need to sort by anything other than partition ID
if (!ordering.isDefined) {
// The user hasn't requested sorted keys, so only sort by partition ID, not key
groupByPartition(destructiveIterator(collection.partitionedDestructiveSortedIterator(None)))
} else {
// We do need to sort by both partition ID and key
groupByPartition(destructiveIterator(
collection.partitionedDestructiveSortedIterator(Some(keyComparator))))
}
} else {
// Merge spilled and in-memory data
//合并溢写文件和内存数据
merge(spills, destructiveIterator(
collection.partitionedDestructiveSortedIterator(comparator)))
}
}
进入merge
/**
* Merge a sequence of sorted files, giving an iterator over partitions and then over elements
* inside each partition. This can be used to either write out a new file or return data to
* the user.
* 合并一系列已排序的文件，在分区上提供迭代器，然后在每个分区内的元素上提供迭代器。这可用于写出新文件或将数据返回给用户。
*
* Returns an iterator over all the data written to this object, grouped by partition. For each
* partition we then have an iterator over its contents, and these are expected to be accessed
* in order (you can't "skip ahead" to one partition without reading the previous one).
* Guaranteed to return a key-value pair for each partition, in order of partition ID.
*/
private def merge(spills: Seq[SpilledFile], inMemory: Iterator[((Int, K), C)])
: Iterator[(Int, Iterator[Product2[K, C]])] = {
//创建一个spillReader，为每个spill文件都创建一个
val readers = spills.map(new SpillReader(_))
val inMemBuffered = inMemory.buffered
(0 until numPartitions).iterator.map { p =>
val inMemIterator = new IteratorForPartition(p, inMemBuffered)
//获取内存中当前partition的数据
val iterators = readers.map(_.readNextPartition()) ++ Seq(inMemIterator)
if (aggregator.isDefined) {
// Perform partial aggregation across partitions
//跨分区执行部分聚合
(p, mergeWithAggregation(
iterators, aggregator.get.mergeCombiners, keyComparator, ordering.isDefined))
} else if (ordering.isDefined) {
// No aggregator given, but we have an ordering (e.g. used by reduce tasks in sortByKey);
// sort the elements without trying to merge them
//没有给出聚合器，但我们有一个排序（例如，由 sortByKey 中的 reduce 任务使用）；对元素进行排序而不尝试合并它们
(p, mergeSort(iterators, ordering.get))
} else {
(p, iterators.iterator.flatten)
}
}
}
两种merge，一种是需要聚合的，一种是不需要聚合的
看看不需要聚合的
// 将属于同一个partition的多个iterator数据进行排序
private def mergeSort(iterators: Seq[Iterator[Product2[K, C]]], comparator: Comparator[K])
: Iterator[Product2[K, C]] =
{
// bufferedIterator就是查看了下一个元素之后不会丢弃
val bufferedIters = iterators.filter(_.hasNext).map(_.buffered)
type Iter = BufferedIterator[Product2[K, C]]
// 这里使用优先级队列，底层使用堆来进行排序，将含有数据的多个iterator添加到堆中，使用队列的头元素进行比较
val heap = new mutable.PriorityQueue[Iter]()(new Ordering[Iter] {
// Use the reverse order because PriorityQueue dequeues the max
// 比较两个buffer的头元素
override def compare(x: Iter, y: Iter): Int = comparator.compare(y.head._1, x.head._1)
})
heap.enqueue(bufferedIters: _*) // Will contain only the iterators with hasNext = true
new Iterator[Product2[K, C]] {
override def hasNext: Boolean = !heap.isEmpty
override def next(): Product2[K, C] = {
if (!hasNext) {
throw new NoSuchElementException
}
// 获得堆顶的第一个元素,并且从队列中删除
// 如果该iterator还有数据，那么再将该iterator添加到堆中
val firstBuf = heap.dequeue()
val firstPair = firstBuf.next()
if (firstBuf.hasNext) {
heap.enqueue(firstBuf)
}
firstPair
}
}
}
看看需要聚合的
// 针对含有同一个partition数据的多个iterator进行合并，如果需要全局有序，还需要排序
private def mergeWithAggregation(
iterators: Seq[Iterator[Product2[K, C]]],
mergeCombiners: (C, C) => C,
comparator: Comparator[K],
totalOrder: Boolean)
: Iterator[Product2[K, C]] =
{
if (!totalOrder) {
// 不需要进行全局排序
// 因为没有定义全局的comparator，所以使用Key的hashcode进行排序
new Iterator[Iterator[Product2[K, C]]] {
// 和之前的一样，使用堆排序
val sorted = mergeSort(iterators, comparator).buffered
// Buffers reused across elements to decrease memory allocation
val keys = new ArrayBuffer[K]
val combiners = new ArrayBuffer[C]
override def hasNext: Boolean = sorted.hasNext
// next() 会将key的hashcode的记录进行聚合，并且返回聚合结果
override def next(): Iterator[Product2[K, C]] = {
if (!hasNext) {
throw new NoSuchElementException
}
keys.clear()
combiners.clear()
// 获得下一个最小元素
val firstPair = sorted.next()
// 将key的hashcode相等但是key不相等的key添加到buffer中
keys += firstPair._1
combiners += firstPair._2
val key = firstPair._1
// 这里其实就是判断是否有相同的key，进行合并
// 当前遍历到的key和第一个key相同
// 因为使用的是默认的使用hashCode比较器，所以就算两个key的hashcode相等，但是key可能是不等的
// 下面的循环就是遍历和第一个数据的key的hashcode相等的数据
while (sorted.hasNext && comparator.compare(sorted.head._1, key) == 0) {
val pair = sorted.next()
var i = 0
var foundKey = false
// 判断keys中是否有和当前遍历到的key相等
// 如果有相同的key，那么就更新combiner的值，进行聚合
while (i < keys.size && !foundKey) {
if (keys(i) == pair._1) {
combiners(i) = mergeCombiners(combiners(i), pair._2)
foundKey = true
}
i += 1
}
// 如果没有和当前key相同的，那么将当前key添加到keys buffer中
if (!foundKey) {
keys += pair._1
combiners += pair._2
}
}
// Note that we return an iterator of elements since we could've had many keys marked
// equal by the partial order; we flatten this below to get a flat iterator of (K, C).
keys.iterator.zip(combiners.iterator)
}
}.flatMap(i => i)
} else {
// We have a total ordering, so the objects with the same key are sequential.
new Iterator[Product2[K, C]] {
val sorted = mergeSort(iterators, comparator).buffered
override def hasNext: Boolean = sorted.hasNext
override def next(): Product2[K, C] = {
if (!hasNext) {
throw new NoSuchElementException
}
val elem = sorted.next()
val k = elem._1
var c = elem._2
// 因为有序，所以不会造成，Key的hashcode相同但是key不相同的记录排在一起
// 不需要buffer了
while (sorted.hasNext && sorted.head._1 == k) {
val pair = sorted.next()
c = mergeCombiners(c, pair._2)
}
(k, c)
}
}
}
}
总结
下面总结一下SortShuffleWriter的工作流程，如果需要聚合使用的是map，如果不需要聚合使用是buffer
下面以需要聚合为例
- 生成一个ExternalSorter对象，该对象是接下来进行操作的对象
- 调用ExternalSorter的insertAll，将所有的数据写入到磁盘，留一部分最新的数据在内存中
- 针对每条数据，会调用map的changeValue()，该方法首先判断hash表中，是否有当前记录的(partitionId,key)，如果没有，那么直接在使用(partitionId,key)的hash值通过计算得到的位置上添加当前记录，如果已经存在，那么在该位置上进行聚合
- 在每次添加数据后，会判断当前的更新次数是否达到了指定的值，如果达到了，需要对当前map所占用的byte个数进行评估，使用SizeEstimator来预估当前map所占用的bytes，并且使用一个samples队列保存近两次的预估结果，计算每次更新增加的byte个数，并且设置下一次采样时的更新次数
- 每添加完一次记录，我们就需要判断是否需要向磁盘溢写，使用在上一步计算的每次更新增加的byte个数乘以当前距最近的一次采样的更新次数增加量计算当前map占用的byte个数，如果map占用的byte个数满足某些条件，那么就开始溢写
- 溢写过程是这样的：因为map使用hash表，所以底层数据并不是每个位置都有数据，所以首先需要将所有的数据都移动到数组的右边，然后按照partition开始排序，如果定义了全局排序规则，那么在每个partition中使用该规则对记录进行排序，否则使用默认的使用key的hashcode进行排序，将排好序的数据写入到文件中
- 当所有的数据都写入到文件中后，我们需要合并多个溢写文件到一个文件，因为文件的记录都是按照partitionid进行排序的，并且我们按照partitionId递增的顺序来合并数据，所以我们可以很快地拿到每个文件中属于当前partition的数据
- 如果不需要聚合，但是需要排序，那么我们将每个文件中属于当前partition的数据组成一个iterator，创建一个堆，将每个iterator添加到堆中，排序规则是每个iterator第一个元素的大小比较规则，每次从堆顶的iterator抽取第一个元素添加到排序结果中，并且将堆顶iterator从堆中移除，如果该iterator还有元素，那么再添加到堆中，这样就完成了排序
- 如果需要聚合，首先也需要排序，这样能够使相同的key排在一起，然后顺序遍历每个元素，进行聚合，这里需要注意，因为如果没有定义全局排序规则，会使用默认的key的hashCode来排序，因此会使得hashCode相同但是key不同的记录排在一起，因此这里还需要使用一个buffer来缓存hashCode相同但是key不同的聚合结果
- 像上面那样遍历处理每个partition，将每次的结果都写入到一个文件中，该文件就是最终的数据文件
- 利用每个partition在数据文件中所占的空间大小，生成索引文件
标签：map,Shuffle,val,partition,源码,key,Spark,排序,def 来源： https://blog.csdn.net/weixin_44773984/article/details/121963202
本站声明： 1. iCode9 技术分享网（下文简称本站）提供的所有内容，仅供技术学习、探讨和分享； 2. 关于本站的所有留言、评论、转载及引用，纯属内容发起人的个人观点，与本站观点和立场无关； 3. 关于本站的所有言论和文字，纯属内容发起人的个人观点，与本站观点和立场无关； 4. 本站文章均是网友提供，不完全保证技术分享内容的完整性、准确性、时效性、风险性和版权归属；如您发现该文章侵犯了您的权益，可联系我们第一时间进行删除； 5. 本站为非盈利性的个人网站，所有内容不会用来进行牟利，也不会利用任何形式的广告来间接获益，纯粹是为了广大技术爱好者提供技术内容和技术思想的分享性交流网站。