标签：node 坑记 False ekf ship3 瓜大 无人 serial se
-
设备准备
- 手柄
- 电池（2块）
- 电台及天线
- 电台电池（12V）
- 网线1根
- 计算机
-
设置计算机网络
-
静态ip地址
-
网段：192.168.0.x
已占用的地址：
192.168.0.57 usv3-laptop 192.168.0.205 hans-linuxpc -
工控机密码
123
-
-
设置工控机网络
-
静态ip地址，无需改动
-
连接键盘鼠标，使用
sudo gedit /etc/hosts在其中添加你的pc：
192.168.0.x xxxxxx
-
-
远程连接服务器
-
ping测试
# usv3 # you can also ping usv3-laptop ping 192.168.0.57 # inet(usv) ping 192.168.0.11 # inet(land) ping 192.168.0.26 -
远程登录
ssh usv3@usv3-laptop
-
-
编译
cd ~/dev/catkin_ws_serial_03 catkin_make -
推进器连接电源，并打开开关
-
依次连接SBG、GPS、推进器
赋权限：
dmesg | grep tty看一下是不是3个，然后：
sudo chmod a+rw /dev/ttyUSB0 sudo chmod a+rw /dev/ttyUSB1 sudo chmod a+rw /dev/ttyUSB2 -
执行ros命令
记得每次都需要远程连接，并
cd ~/dev/catkin_ws_serial_03 source devel/setup.bash随后：
roscore执行：
roslaunch launch_files npu_asv_sensor.launch SUMMARY ======== CLEAR PARAMETERS * /ekf_se_ship3/ PARAMETERS * /ekf_se_ship3/acceleration_gains: [0.8, 0.0, 0.0, 0... * /ekf_se_ship3/acceleration_limits: [1.3, 0.0, 0.0, 0... * /ekf_se_ship3/base_link_frame: base_link * /ekf_se_ship3/control_config: [True, False, Fal... * /ekf_se_ship3/control_timeout: 0.2 * /ekf_se_ship3/debug: False * /ekf_se_ship3/debug_out_file: /path/to/debug/fi... * /ekf_se_ship3/deceleration_gains: [1.0, 0.0, 0.0, 0... * /ekf_se_ship3/deceleration_limits: [1.3, 0.0, 0.0, 0... * /ekf_se_ship3/frequency: 30 * /ekf_se_ship3/imu0: /imu_data1 * /ekf_se_ship3/imu0_config: [False, False, Fa... * /ekf_se_ship3/imu0_differential: False * /ekf_se_ship3/imu0_linear_acceleration_rejection_threshold: 0.8 * /ekf_se_ship3/imu0_nodelay: False * /ekf_se_ship3/imu0_pose_rejection_threshold: 0.8 * /ekf_se_ship3/imu0_queue_size: 5 * /ekf_se_ship3/imu0_relative: False * /ekf_se_ship3/imu0_remove_gravitational_acceleration: False * /ekf_se_ship3/imu0_twist_rejection_threshold: 0.8 * /ekf_se_ship3/initial_estimate_covariance: ['1e-9', 0, 0, 0,... * /ekf_se_ship3/map_frame: map * /ekf_se_ship3/odom0: /odom * /ekf_se_ship3/odom0_config: [True, True, Fals... * /ekf_se_ship3/odom0_differential: True * /ekf_se_ship3/odom0_nodelay: False * /ekf_se_ship3/odom0_pose_rejection_threshold: 5 * /ekf_se_ship3/odom0_queue_size: 10 * /ekf_se_ship3/odom0_relative: False * /ekf_se_ship3/odom0_twist_rejection_threshold: 1 * /ekf_se_ship3/odom1: example/odom * /ekf_se_ship3/odom1_config: [True, True, Fals... * /ekf_se_ship3/odom1_differential: False * /ekf_se_ship3/odom1_nodelay: False * /ekf_se_ship3/odom1_pose_rejection_threshold: 2 * /ekf_se_ship3/odom1_queue_size: 10 * /ekf_se_ship3/odom1_relative: True * /ekf_se_ship3/odom1_twist_rejection_threshold: 1 * /ekf_se_ship3/odom_frame: odom * /ekf_se_ship3/pose0: example/pose * /ekf_se_ship3/pose0_config: [True, True, Fals... * /ekf_se_ship3/pose0_differential: True * /ekf_se_ship3/pose0_nodelay: False * /ekf_se_ship3/pose0_queue_size: 5 * /ekf_se_ship3/pose0_rejection_threshold: 2 * /ekf_se_ship3/pose0_relative: False * /ekf_se_ship3/print_diagnostics: True * /ekf_se_ship3/process_noise_covariance: [0.05, 0, 0, 0, 0... * /ekf_se_ship3/publish_acceleration: False * /ekf_se_ship3/publish_tf: False * /ekf_se_ship3/sensor_timeout: 1 * /ekf_se_ship3/stamped_control: False * /ekf_se_ship3/transform_time_offset: 0.0 * /ekf_se_ship3/transform_timeout: 0.0 * /ekf_se_ship3/twist0: example/twist * /ekf_se_ship3/twist0_config: [False, False, Fa... * /ekf_se_ship3/twist0_nodelay: False * /ekf_se_ship3/twist0_queue_size: 3 * /ekf_se_ship3/twist0_rejection_threshold: 2 * /ekf_se_ship3/two_d_mode: True * /ekf_se_ship3/use_control: False * /ekf_se_ship3/world_frame: odom * /nmea_serial_driver_node_ship3/baud: 115200 * /nmea_serial_driver_node_ship3/frame_id: odom * /nmea_serial_driver_node_ship3/port: /dev/ttyUSB2 * /nmea_serial_driver_node_ship3/time_ref_source: gps * /nmea_serial_driver_node_ship3/useRMC: False * /rosdistro: kinetic * /rosversion: 1.12.14 NODES / ekf_se_ship3 (robot_localization/ekf_localization_node) imudata_sbg_ship3 (tutorial/imudata_sbg.py) listener_ship3 (my_serial_node/listener) nmea_serial_driver_node_ship3 (nmea_navsat_driver/nmea_serial_driver) odom_trans_ship3 (tutorial/odom_trans_npu.py) sbg_serial_ship3 (my_serial_node/sbg_serial) sonar_listener_ship3 (my_serial_node/sonar_listener) sonar_serial_ship3 (my_serial_node/sonar_serial) utm_odometry_node_ship3 (gps_common/utm_odometry_node) ROS_MASTER_URI=http://localhost:11311 process[sbg_serial_ship3-1]: started with pid [10077] process[listener_ship3-2]: started with pid [10078] process[nmea_serial_driver_node_ship3-3]: started with pid [10088] process[sonar_listener_ship3-4]: started with pid [10101] process[sonar_serial_ship3-5]: started with pid [10104] process[utm_odometry_node_ship3-6]: started with pid [10112] process[imudata_sbg_ship3-7]: started with pid [10121] process[odom_trans_ship3-8]: started with pid [10127] [ERROR] [1606464842.121274597]: Unable to open Sonarport process[ekf_se_ship3-9]: started with pid [10149]执行：
roslaunch launch_files npu_asv_actuator.launch NODES / talker_ship3 (my_serial_node/talker_ship2u1) thrust_serial_ship3 (my_serial_node/thrust_serial)
注意：
标签：node,坑记,False,ekf,ship3,瓜大,无人,serial,se 来源： https://www.cnblogs.com/letisl/p/14049065.html
本站声明： 1. iCode9 技术分享网（下文简称本站）提供的所有内容，仅供技术学习、探讨和分享； 2. 关于本站的所有留言、评论、转载及引用，纯属内容发起人的个人观点，与本站观点和立场无关； 3. 关于本站的所有言论和文字，纯属内容发起人的个人观点，与本站观点和立场无关； 4. 本站文章均是网友提供，不完全保证技术分享内容的完整性、准确性、时效性、风险性和版权归属；如您发现该文章侵犯了您的权益，可联系我们第一时间进行删除； 5. 本站为非盈利性的个人网站，所有内容不会用来进行牟利，也不会利用任何形式的广告来间接获益，纯粹是为了广大技术爱好者提供技术内容和技术思想的分享性交流网站。