标签：checksum address TCP header IPv4 IPv6 数据包
TCP checksum for IPv4[edit]
When TCP runs over IPv4, the method used to compute the checksum is defined in RFC 793:
The checksum field is the 16 bit one's complement of the one's complement sum of all 16-bit words in the header and text. If a segment contains an odd number of header and text octets to be checksummed, the last octet is padded on the right with zeros to form a 16-bit word for checksum purposes. The pad is not transmitted as part of the segment. While computing the checksum, the checksum field itself is replaced with zeros.
In other words, after appropriate padding, all 16-bit words are added using one's complement arithmetic. The sum is then bitwise complemented and inserted as the checksum field. A pseudo-header that mimics the IPv4 packet header used in the checksum computation is shown in the table below.
| Bit offset | 0–3 | 4–7 | 8–15 | 16–31 | ||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 0 | Source address | |||||||||||||||||||||||||||||||
| 32 | Destination address | |||||||||||||||||||||||||||||||
| 64 | Zeros | Protocol | TCP length | |||||||||||||||||||||||||||||
| 96 | Source port | Destination port | ||||||||||||||||||||||||||||||
| 128 | Sequence number | |||||||||||||||||||||||||||||||
| 160 | Acknowledgement number | |||||||||||||||||||||||||||||||
| 192 | Data offset | Reserved | Flags | Window | ||||||||||||||||||||||||||||
| 224 | Checksum | Urgent pointer | ||||||||||||||||||||||||||||||
| 256 | Options (optional) | |||||||||||||||||||||||||||||||
| 256/288+ | Data |
|||||||||||||||||||||||||||||||
The source and destination addresses are those of the IPv4 header. The protocol value is 6 for TCP (cf. List of IP protocol numbers). The TCP length field is the length of the TCP header and data (measured in octets).
TCP checksum for IPv6[edit]
When TCP runs over IPv6, the method used to compute the checksum is changed, as per RFC 2460:
- Any transport or other upper-layer protocol that includes the addresses from the IP header in its checksum computation must be modified for use over IPv6, to include the 128-bit IPv6 addresses instead of 32-bit IPv4 addresses.
A pseudo-header that mimics the IPv6 header for computation of the checksum is shown below.
| Bit offset | 0–7 | 8–15 | 16–23 | 24–31 | ||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 0 | Source address | |||||||||||||||||||||||||||||||
| 32 | ||||||||||||||||||||||||||||||||
| 64 | ||||||||||||||||||||||||||||||||
| 96 | ||||||||||||||||||||||||||||||||
| 128 | Destination address | |||||||||||||||||||||||||||||||
| 160 | ||||||||||||||||||||||||||||||||
| 192 | ||||||||||||||||||||||||||||||||
| 224 | ||||||||||||||||||||||||||||||||
| 256 | TCP length | |||||||||||||||||||||||||||||||
| 288 | Zeros | Next header = Protocol |
||||||||||||||||||||||||||||||
| 320 | Source port | Destination port | ||||||||||||||||||||||||||||||
| 352 | Sequence number | |||||||||||||||||||||||||||||||
| 384 | Acknowledgement number | |||||||||||||||||||||||||||||||
| 416 | Data offset | Reserved | Flags | Window | ||||||||||||||||||||||||||||
| 448 | Checksum | Urgent pointer | ||||||||||||||||||||||||||||||
| 480 | Options (optional) | |||||||||||||||||||||||||||||||
| 480/512+ | Data |
|||||||||||||||||||||||||||||||
- Source address: the one in the IPv6 header
- Destination address: the final destination; if the IPv6 packet doesn't contain a Routing header, TCP uses the destination address in the IPv6 header, otherwise, at the originating node, it uses the address in the last element of the Routing header, and, at the receiving node, it uses the destination address in the IPv6 header.
- TCP length: the length of the TCP header and data
- Next Header: the protocol value for TCP
https://en.wikipedia.org/wiki/Transmission_Control_Protocol
标签：checksum,address,TCP,header,IPv4,IPv6,数据包 来源： https://www.cnblogs.com/rsapaper/p/15048293.html
本站声明： 1. iCode9 技术分享网（下文简称本站）提供的所有内容，仅供技术学习、探讨和分享； 2. 关于本站的所有留言、评论、转载及引用，纯属内容发起人的个人观点，与本站观点和立场无关； 3. 关于本站的所有言论和文字，纯属内容发起人的个人观点，与本站观点和立场无关； 4. 本站文章均是网友提供，不完全保证技术分享内容的完整性、准确性、时效性、风险性和版权归属；如您发现该文章侵犯了您的权益，可联系我们第一时间进行删除； 5. 本站为非盈利性的个人网站，所有内容不会用来进行牟利，也不会利用任何形式的广告来间接获益，纯粹是为了广大技术爱好者提供技术内容和技术思想的分享性交流网站。