标签：vmnet3 自定义 timeout Controls Fusion TCP NAT address VMware
➜ vmnet3 pwd
/Library/Preferences/VMware Fusion/vmnet3
➜ vmnet3 cat nat.conf
# VMware NAT configuration file
# Manual editing of this file is not recommended. Using UI is preferred.
[host]
# Use MacOS network virtualization API
useMacosVmnetVirtApi = 1
# NAT gateway address
ip = 172.16.59.2
netmask = 255.255.255.0
# VMnet device if not specified on command line
device = vmnet3
# Allow PORT/EPRT FTP commands (they need incoming TCP stream ...)
activeFTP = 1
# Allows the source to have any OUI. Turn this on if you change the OUI
# in the MAC address of your virtual machines.
allowAnyOUI = 1
# Controls if (TCP) connections should be reset when the adapter they are
# bound to goes down
resetConnectionOnLinkDown = 1
# Controls if (TCP) connection should be reset when guest packet's destination
# is NAT's IP address
resetConnectionOnDestLocalHost = 1
# Controls if enable nat ipv6
natIp6Enable = 0
# Controls if enable nat ipv6
natIp6Prefix = fd15:4ba5:5a2b:1003::/64
[tcp]
# Value of timeout in TCP TIME_WAIT state, in seconds
timeWaitTimeout = 30
[udp]
# Timeout in seconds. Dynamically-created UDP mappings will purged if
# idle for this duration of time 0 = no timeout, default = 60; real
# value might be up to 100% longer
timeout = 30
[netbios]
# Timeout for NBNS queries.
nbnsTimeout = 2
# Number of retries for each NBNS query.
nbnsRetries = 3
# Timeout for NBDS queries.
nbdsTimeout = 3
[incomingtcp]
# Use these with care - anyone can enter into your VM through these...
# The format and example are as follows:
#<external port number> = <VM's IP address>:<VM's port number>
#8080 = 172.16.3.128:80
[incomingudp]
# UDP port forwarding example
#6000 = 172.16.3.0:6001
➜ vmnet3
标签：vmnet3,自定义,timeout,Controls,Fusion,TCP,NAT,address,VMware 来源： https://www.cnblogs.com/heidsoft/p/15586299.html
本站声明： 1. iCode9 技术分享网（下文简称本站）提供的所有内容，仅供技术学习、探讨和分享； 2. 关于本站的所有留言、评论、转载及引用，纯属内容发起人的个人观点，与本站观点和立场无关； 3. 关于本站的所有言论和文字，纯属内容发起人的个人观点，与本站观点和立场无关； 4. 本站文章均是网友提供，不完全保证技术分享内容的完整性、准确性、时效性、风险性和版权归属；如您发现该文章侵犯了您的权益，可联系我们第一时间进行删除； 5. 本站为非盈利性的个人网站，所有内容不会用来进行牟利，也不会利用任何形式的广告来间接获益，纯粹是为了广大技术爱好者提供技术内容和技术思想的分享性交流网站。